[whitey10tc]

Originally Posted by kaeslumz

I TAKE NO CREDIT FOR THIS>>>(THX to DHARVEY)


Here is what you need to do:

1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)

THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.

DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS

21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.

31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.

32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.

33. Follow instructions to flash new OS to device.

34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.

Originally Posted by chaopac

thanks for your help man, but, the thing is, i've already Hard SPL the phone right now (it means i can upgrade a new ROM also) what i need right now is the tool to UNLOCK a CDMA Phone (which is show at post 2), but the author of the post doesnt give any link to download the tool, so i'm asking you guys for it, not the Hard SPL tool, it likes a tool to unlock SIM card on other GSM phone...

PM me if this is not the one