[Merdinh]

Originally Posted by Whosdaman

Where have they stated that the tpro2 will have an WM7 upgrade?

The requirements for a device to run WM7 is:

WM7 Chassis 1 Specification

Core requirements:
Processor: ARM v6+, L2 Cache, VFP, Open GL ES 2.0 graphics HW (QCOM 8k, Nvidia AP15/16* and TI 3430 all meet spec)
Memory: 256MB+ DRAM, 1G+ Flash (at least 512MB fast flash – 5MB/s unbuffered read @4K block size)
Display: WVGA (800×480) or FWVGA (854×480) 3.5” or greater diagonal
Touch: Multi-touch required
Battery: Sufficient to meet Days of Use LTK requirements.
Controls: Start, Back, Send and End are required (soft controls allowed as long as they are always present).

Peripherals:
Camera: 3MP+, flash optional, 2nd camera optional (VGA resolution sufficient)
GPS: aGPS required
Sensors required: Light Sensor, Compass (3 axis, 5 degrees, 100 Hz sample rate), Accelerometer (3 axis, 2mg resolution, 100 Hz sample rate)
USB: High speed required, 20 MB/s transfer rate.
BlueTooth: BT2.1 required, must run MSFT BT stack, CSR BlueCore6 or later recommended.
Wi-Fi: 802.11B/G required, must run MSFT Native Wi-Fi stack, Atheros 6002 or Broadcomm 4325 recommended.
Connectors: Micro USB and 3.5mm Audio required.

Options:
FM tuner: If tuner HW is present it will be detected and supported by the Media application.
Haptics
SD Card (Micro SD recommended)
DPAD, qwerty or 12/20 key keyboards all optional

(EDIT: I didn't know what QCOM was, but it requires a QualComm 8K processor, tpro2 will have a 7600a)

Also where does it say there are 2 totally different teams working on WM7 and 6.5, cause no one has posted a source or a confirmation of this at all...hell people have even said 6.5 is being incorporated into wm7

idk where you got this info from, but most is inaccurate, the main requirement will be any new phone now that will have the dedicated windows button on it, will be upgradable to wm7, and that comes from a buddy of mine that works for Microsoft.