[Theme][TF3D][VGA] BlueThunder v1.0 by TheShade001
 

http://www.hhvisualgroup.com/temp/bl...er_preview.jpg

After posting a few images on another thread i started getting hammered with PMs about sharing my theme. This is my first attempt at a TF3D skin. I tried to be as thorough as possible, but have not had as much time i would like. This theme is based off of the sprint 10-button stock manila files(black theme). I borrowed a few manila files from the alltel stock manila as well in order to get seperate rollovers for the tray icons and the larger graphic(hero).

BlueThunder v1.0 was designed around the wallpaper that I have included which you can set in the settings tab. I take no credit for the clock. I just used one that i like called ClearDigital.cab which is floating around. I do take credit for everything else. :)

I am still working on it as well as making a version for TF3D2 which should be done fairly soon(in the next couple of weeks).

To install:

1. Copy wallpaper to your device or storage card.
2. Disable TouchFlo 3D
3. Run BlueThunder_v1.0.cab
4. Soft reset
5. Enable TouchFlo 3D
6. Slide the TF3D slider to the settings tab and select "Wallpaper" from the list.
7. When asked if you want to use default background hit "No."
8. Browse to where you saved the wallpaper and select it.
9. Enjoy

*NOTE: I have tested this on MightyROM 5 and the new ROM that Silence and Mighty Mike just released. The background for all pages, on these roms, worked without having to install it. Not sure about other roms. If the wallpaper is not on all pages you may need to download the mUn_BackGround4AllPages_v.02.cab which i have added below.

Also, since theme cabs do not always roll back correctly i figured i better add the stock manila files which are attached below. Although the stock cab is much smaller than the theme, for some reason, the actual manila files are about the same size(13mb or so). If you prefer the stock manila files over a cab, let me know and i will post them as well.

By all means, criticize. I am looking to get more detailed and better with the next one. If you happen to like it, don't forget to hit the "thanks" button.

*EDIT* I have add the ClearDigital clock cab for those who want it.

Re: [Theme][TF3D][VGA] BlueThunder v1.0 by TheShade001
 

Very nice

Re: [Theme][TF3D][VGA] BlueThunder v1.0 by TheShade001
 

Looks cool.
Can't test cause I'm qvga.
Nice Work.

Re: [Theme][TF3D][VGA] BlueThunder v1.0 by TheShade001
 

bummer. I was just getting my feet wet, but i will look into what it takes to convert it to qvga. If it isn't too painstaking i will convert it for ya.

Re: [Theme][TF3D][VGA] BlueThunder v1.0 by TheShade001
 

Very good job !
I love it,
Thanx

:)

Re: [Theme][TF3D][VGA] BlueThunder v1.0 by TheShade001
 

I am going to try this theme good job looks great...

Re: [Theme][TF3D][VGA] BlueThunder v1.0 by TheShade001
 

Hi. I like the theme, good work. I'm not following you on this bit. What cab are you referring to to get the background on every page. I can't seem to get the background enabled. Can you please clarify the steps for doing this.

Thanks.

Re: [Theme][TF3D][VGA] BlueThunder v1.0 by TheShade001
 

This is what u want if your running windows 6.1...

Re: [Theme][TF3D][VGA] BlueThunder v1.0 by TheShade001
 

Looks like Brivers had ur back. I went ahead and added the cab to the first post too. To install it:

1. Save the wallpaper anywhere on your device or storage card
2. Disable TF3D
3. Run the cab
4. soft reset
5. enable TF3D
6. go to the settings tab and select wallpaper
7. browse to the image

That should be it.

Re: [Theme][TF3D][VGA] BlueThunder v1.0 by TheShade001
 

TF3D is crashing and then re-starting when I go to the Weather tab.

Anyone else having this issue?

Thanks
printlet

---More details---
I'm Running Silence ROM (NOT the Mighty / Silence collaboration ROM)