PPCGeeks
Page 2 of 9 1 2 34 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro (http://forum.ppcgeeks.com/forumdisplay.php?f=63)
-   -   User Customization Backup for Touch Pro using sashimi (http://forum.ppcgeeks.com/showthread.php?t=75214)

murducky 08-13-2009 07:07 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by rawdikrik (Post 1099743)
Just reposting some stuff from NRG thread. People are talking about Sahimi back ups. Gonna try to recommend people come over here:

Run the Lumos configuration program (just like you always would) then copy the "settings.txt" to "sashimi\auto\root\program files\lumus" you will need to create all these folders or figure out some way to copy them. Anything in the root folder copies to whatever folder on your device. Sashimi will create the folders if they don't exist, but typically it installs all the apps first. After an auto install I don't have to do anything with lumos (nice). You can do the same thing with ringers just make a mirror of what directory in "root" and Sashimi will copy them for you when you run it.
Sounds good. I will add this to post 1 soon. thanks !

rawdikrik 08-13-2009 08:12 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by askwhy (Post 1067368)
For Opera bookmarks, backup the file called 'opera6.adr' in \WINDOWS\Opera and just drop it in the corresponding SASHIMI\Auto\Root\WINDOWS\Opera folder to have it auto-restored when you run SASHIMI.

Dunno about the logins or Rescoe, but I have a few minutes before I have to go see clients -- let me see if I can turn anything up. I will edit this post if I do...

EDIT: You might try using CeRegEditor if you haven't already to find your Rescoe registration data in the registry (if it's there) and then export it to a file. Take a snapshot before you register it, then after, then compare snapshots to find the differences.
FYI... on my Rom (NRG) its called Opera9

askwhy 08-13-2009 10:10 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by rawdikrik (Post 1099918)
FYI... on my Rom (NRG) its called Opera9
I am running the same ROM bro, and the bookmarks file is opera6.adr, even though the Opera version is 9. Just FYI.

EDIT: The folder you mean? Yeah, it's Opera9 where I said Opera, I better update that...Updated. Thanks for the heads up. I must have been slipping when I made those two posts originally, they each had one folder name typo in them (now corrected). Sheesh.

zone23 08-14-2009 09:58 AM
Re: User Customization Backup for Touch Pro using sashimi
 
I found that if you backup registry key HKLM\Software\Microsoft\Bluetooth\Devices on restore it will restore all bluetooth devices. The only catch is I have not figured out how to get bluetooth headsets to work. All computer connections will work, so its a start. So at least so far I only have to repair my car and headset. All 3 computers work fine.

murducky 08-14-2009 11:20 AM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by zone23 (Post 1100825)
I found that if you backup registry key HKLM\Software\Microsoft\Bluetooth\Devices on restore it will restore all bluetooth devices. The only catch is I have not figured out how to get bluetooth headsets to work. All computer connections will work, so its a start. So at least so far I only have to repair my car and headset. All 3 computers work fine.
thanks for this... I will look into this a add it to post 1 soon.

Scoob 08-14-2009 04:40 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by elosogrande7076 (Post 1055203)
Great post...does anyone know how to backup the weather and programs info for tf3d? That would be great....thanks and please keep up the great info.
Askwhy has a good write up on the weather tab...

Are you talking about the programs tab?

I found this reference seraching the net and registry with a string of numbers after ProgramLauncher which may correspond to the program shortcut link...

[HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLaun cher\0]

I am trying to fill up the tabs and then copy the regs to see that will happen.

zone23 08-14-2009 05:53 PM
Re: User Customization Backup for Touch Pro using sashimi
 
yes this key works just back it up once you fill the tabs, it will restore your program file tab you know the last tab with all the shortcuts


HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLaun cher <- I dont know whats up with the space between the n and the c

zone23 08-14-2009 06:03 PM
Re: User Customization Backup for Touch Pro using sashimi
 
this is a good one too:

My Contact Card (thanks to dylan927us)
backup reg key HKEY_CURRENT_USER\Software\HTC\People\OwnerInfo export to Storage Card\SASHIMI\Auto\REG

then go and copy windows\fbcontacts\xxxx.jpg the .jpg should be your profile picture to your sashimi\auto\root\windows\fbcontacts\


If you do this after restore it will have all your contact information and the picture already set after a restore. now I only had one .jpg you may have more the exported key will have the exact .jpg name it will look like this:

"PhotoPath"="\\Windows\\FBContacts\\1536801296.jpg "

open the registry key with notepad on your PC

zone23 08-14-2009 06:10 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by askwhy (Post 1067404)
Not sure about the programs tab, as I keep it disabled anymore -- but I can help with the weather. To backup your weather settings you need to save a regfile to SASHIMI\Auto\REG with some of the data from --

[HKEY_CURRENT_USER\Software\HTC\Manila]

In particular, you need to backup 'Weather.CityList' but I would also include:

'Weather.ServerURLOverride'
'Locale'
'Weather_Focus'
'Weather.Fahrenheit'
'Weather.PostFirstRun'

After running SASHIMI you will have any pre-cooked-in locations removed and overwritten with your own -- and you will only need to hit 'Update'. For instance my file looks like this:
Not sure if all the chefs have ROMs with the same weather server URL cooked-in, the one above is simply the one that was already in my registry when I went to back it up. I had no idea previously that a special weather patch server tied to the community was even being used to make things happen.

yep I export:
[HKEY_CURRENT_USER\Software\HTC\Manila]"Weather.CityList"

zone23 08-14-2009 06:12 PM
Re: User Customization Backup for Touch Pro using sashimi
 
It may be posted already but this turn on your bluetooth:

[HKEY_CURRENT_USER\Software\Microsoft\Bluetooth\Set tings]"ScanMode"=dword:00000005

zone23 08-14-2009 06:18 PM
Re: User Customization Backup for Touch Pro using sashimi
 
this one backs up you current power plan:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\Timeouts

twe90kid 08-14-2009 07:41 PM
Re: User Customization Backup for Touch Pro using sashimi
 
how to you backup weather when you have custom locations that you added using weatherdatabaseeditor

askwhy 08-14-2009 07:44 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by twe90kid (Post 1102062)
how to you backup weather when you have custom locations that you added using weatherdatabaseeditor

In addition to the registry information mentioned on the previous pages, you will want to backup the manila file (database) that you edited, and that file is called 2330fc3c_manila -- if you place that file in \SASHIMI\Auto\Root\Windows\ you will be able to have it restored as well.

I should add this to my previous post as well -- my own city is in the standard database, and at the time I posted it I wasn't even aware of the database file.

zone23 08-15-2009 09:20 AM
Re: User Customization Backup for Touch Pro using sashimi
 
Maybe someone can help me I'm trying to fix my activesync settings when I restore it doesn't complete a few lines. Can some one take a look at the following and see whats missing:

<characteristic type="Sync">
<characteristic type="Connection">
<parm name="Server" value="*******"/>
<parm name="User" value="******"/>
<parm name="Domain" value="******.****"/>
<parm name="Password" value="*******"/>
<parm name="SavePassword" value="1"/>
<parm name="AllowSSLOption" value="1"/>
<parm name="useSSL" value="0"/>
</characteristic>
<characteristic type="Settings">

it doesn't enter the email address or the password I have to go back and type them in manually. Am i missing someting in the section of the XML? I'm thinking it should be something like:

<parm name="EmailAddress" value="**@***.***"/>

Then I wonder why it doesn't enter the password I see the value in the code, whats up with that?

zone23 08-15-2009 09:29 AM
Re: User Customization Backup for Touch Pro using sashimi
 
Also I can't get my favorite contacts to restore I tried backing up and restoring the pim.vol but no go, anyone have any other ideas?

murducky 08-15-2009 03:33 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by zone23 (Post 1102926)
Also I can't get my favorite contacts to restore I tried backing up and restoring the pim.vol but no go, anyone have any other ideas?
touch flo or titanium favorite people ?

zone23 08-15-2009 06:08 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by murducky (Post 1103406)
touch flo or titanium favorite people ?
Touch Flo

zone23 08-15-2009 06:11 PM
Re: User Customization Backup for Touch Pro using sashimi
 
If you move tabs around like I do or at least the weather tab use this to restore there order:

HKEY_LOCAL_MACHINE\Software\HTC\Manila\Configurati on

zone23 08-15-2009 06:22 PM
Re: User Customization Backup for Touch Pro using sashimi
 
I cant get Sashimi to delete files this instructions say to use deleteops.ini in the ini folder so I have created the file with the following code any help?

[DeleteFile]
file1=\Windows\StartMenu\Programs\Comm Manager.lnk
file2=\Windows\StartMenu\Programs\utilities\search .lnk
file3=\Windows\StartMenu\Programs\utilities\total commander.lnk
file4=\Windows\StartMenu\Programs\internet\disable data.lnk
file5=\Windows\StartMenu\Programs\internet\email wizard.lnk
file6=\Windows\StartMenu\Programs\internet\beejive im.lnk


I got it it was "StartMenu" needed to me "Start Menu" makes sense.

D\/8 08-16-2009 05:24 PM
Re: User Customization Backup for Touch Pro using sashimi
 
1 Attachment(s)
Okay… I’ve been looking for away to have SASHIMI auto initiate after a hard reset so that there would require no interaction from the user once the Onscreen Calibration process was complete.

I searched both here and over at WinMo Experts and could not find any answers so after about 50 hard resets and twice as may dirty looks from you know who I finally got it to work for me using User Customization (UC). Please keep in mind your ROM must support UC.

Here’s how:
  • Navigate to \Storage Card\SASHIMI\Program\2577. Here you will see a file called AutoRun.mscr.
  • Create a shortcut to this file within the same directory and name it SASHIMI.lnk.
  • Create an SDConfig.txt file with the below commands and save it to the root of the Storage Card. (Included SDConfig.txt attached)
Quote:
CPY1:\Storage Card\SASHIMI\Program\2577\SASHIMI.lnk
CPY2:\Temp\SASHIMI.lnk
HIDE:Enabled
EXEC:\Temp\SASHIMI.lnk
That’s it!!!

Now, every time you hard rest your device will flash the new ROM. Once complete, UC initiates and checks the SDConfig file for instructions. Based on our SDConfig file, UC will copy the SASHIMI.lnk we created over to \Temp where it can then be executed by UC. This will launch SASHIMI that the user can either interact with or if no interaction within 20 seconds SASHIMI will initiate the “Auto” installer, installing all configurations setup within the \SASHIMI\Auto directory. Once all is complete, SASHIMI will then prompt the user to reset the device yes or no. If no interaction within 10 seconds, SASHIMI will automatically reset the device.

Basically, once you initiate a hard reset and complete the onscreen calibration you never have to touch the device again throughout the install and configuration process.

Enjoy!!!

Edit: One thing prevents this from being an comletely unattended install... The fact that if the device goes to sleep during SASHIMI Auto install it seems to pause the installation process until you wake the device. This means you have to make sure to keep the device awake during the install process. I'm looking into away to keep the device awake during this process. I'll update if I find a solution.


Edit 2: Only workaround I can find is to plug into external power during the install process. I believe by default Windows will not sleep for 30 minutes which is plenty of time. This will allow a complete userless flash and restore once the onscreen calibration is completed.

twe90kid 08-16-2009 09:40 PM
Re: User Customization Backup for Touch Pro using sashimi
 
couldn't get the above to work properly.

D\/8 08-16-2009 10:02 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by twe90kid (Post 1105512)
couldn't get the above to work properly.
Not sure... I have flashed 3 times today with no issue...

What are you experiencing...?

twe90kid 08-16-2009 10:36 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by DV8Ways (Post 1105544)
Not sure... I have flashed 3 times today with no issue...

What are you experiencing...?
it throws and error with the following

"The file 'set' cannot be opened. either it is not signed with a trusted cert..."

twe90kid 08-16-2009 10:46 PM
Re: User Customization Backup for Touch Pro using sashimi
 
is it suppose to be the autorun.mscr file or the autorun shortcut?

D\/8 08-16-2009 11:12 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by twe90kid (Post 1105605)
is it suppose to be the autorun.mscr file or the autorun shortcut?
You need to create a shortcut for AutoRun.mscr and name it SASHIMI.lnk. Save it in the same directory as the AutoRun.mscr. The script will copy the SASHIMI.lnk to \Temp and then execute it.

twe90kid 08-16-2009 11:25 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by DV8Ways (Post 1105638)
You need to create a shortcut for AutoRun.mscr and name it SASHIMI.lnk. Save it in the same directory as the AutoRun.mscr. The script will copy the SASHIMI.lnk to \Temp and then execute it.
doesn't work, tried it 3 times

murducky 08-17-2009 12:49 AM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by DV8Ways (Post 1105130)
Okay… I’ve been looking for away to have SASHIMI auto initiate after a hard reset so that there would require no interaction from the user once the Onscreen Calibration process was complete.

I searched both here and over at WinMo Experts and could not find any answers so after about 50 hard resets and twice as may dirty looks from you know who I finally got it to work for me using User Customization (UC). Please keep in mind your ROM must support UC.

Here’s how:
  • Navigate to \Storage Card\SASHIMI\Program\2577. Here you will see a file called AutoRun.mscr.
  • Create a shortcut to this file within the same directory and name it SASHIMI.lnk.
  • Create an SDConfig.txt file with the below commands and save it to the root of the Storage Card. (Included SDConfig.txt attached)
That’s it!!!

Now, every time you hard rest your device will flash the new ROM. Once complete, UC initiates and checks the SDConfig file for instructions. Based on our SDConfig file, UC will copy the SASHIMI.lnk we created over to \Temp where it can then be executed by UC. This will launch SASHIMI that the user can either interact with or if no interaction within 20 seconds SASHIMI will initiate the “Auto” installer, installing all configurations setup within the \SASHIMI\Auto directory. Once all is complete, SASHIMI will then prompt the user to reset the device yes or no. If no interaction within 10 seconds, SASHIMI will automatically reset the device.

Basically, once you initiate a hard reset and complete the onscreen calibration you never have to touch the device again throughout the install and configuration process.

Enjoy!!!

Edit: One thing prevents this from being an comletely unattended install... The fact that if the device goes to sleep during SASHIMI Auto install it seems to pause the installation process until you wake the device. This means you have to make sure to keep the device awake during the install process. I'm looking into away to keep the device awake during this process. I'll update if I find a solution.


Edit 2: Only workaround I can find is to plug into external power during the install process. I believe by default Windows will not sleep for 30 minutes which is plenty of time. This will allow a complete userless flash and restore once the onscreen calibration is completed.
ty ! i was looking for this just had not got around to it !! I will work on this tomorrow and add it to post 1 !! GREAT JOB !

D\/8 08-17-2009 12:54 AM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by twe90kid (Post 1105657)
doesn't work, tried it 3 times
Hmmm...

So you created the shortcut and named it SASHIMI and it's located in the 2577 folder. And you have the SDConfig file saved to the root of the storage and still no go???

After you get the error... Check the \Temp folder and see if you have the copied SASHIMI.lnk. If it's there see if it will launch SASHIMI.

Report back please...

I wish we had some other testers........

codydavis22 08-17-2009 02:07 AM
Re: User Customization Backup for Touch Pro using sashimi
 
Anybody know where the reg for signature in sms is?

murducky 08-17-2009 03:15 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by codydavis22 (Post 1105848)
Anybody know where the reg for signature in sms is?
I have done a few reg searches and so far have not had any luck locating the key.

if i do find it i'll post

D\/8 08-17-2009 05:11 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by murducky (Post 1106638)
I have done a few reg searches and so far have not had any luck locating the key.

if i do find it i'll post
Same here don't think it saves in the reg... Must be a config file somewhere...

askwhy 08-17-2009 06:12 PM
Re: User Customization Backup for Touch Pro using sashimi
 
@ DV8Ways

Nice tip on getting Sashimi to run via SDConfig! I am going to go ahead and do a hard reset to test it out in a few minutes here.

EDIT: It worked just fine here. Talk about automated -- there's almost nothing left to do now -- align screen>WAIT>setup sig>enter passwords>sync>DONE.

Regarding signatures -- I have never been able to isolate it for backup. I have wondered if it is perhaps part of the message store?

D\/8 08-17-2009 06:59 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by askwhy (Post 1106988)
@ DV8Ways

Nice tip on getting Sashimi to run via SDConfig! I am going to go ahead and do a hard reset to test it out in a few minutes here.
Please let us know how it workrs out... We have had a success (Me) and a failure (Twe90kid). I'm hoping to hear some other success stories other than my own.

Quote:
Originally Posted by askwhy (Post 1106988)
@ DV8Ways

EDIT: It worked just fine here. Talk about automated -- there's almost nothing left to do now -- align screen>WAIT>setup sig>enter passwords>sync>DONE.
Excellent!!! Glad to see it worked...

elosogrande7076 08-18-2009 10:54 AM
Re: User Customization Backup for Touch Pro using sashimi
 
those who are backing up the weather settings, how are you guys doing it? Im using Resco Explorer/registry and it is not letting me export single files (folders work just fine)....is it just a program limitation or am i doing something wrong

zone23 08-18-2009 12:25 PM
Re: User Customization Backup for Touch Pro using sashimi
 
I couldn't get it to work I can see the program try to launch (it makes the temp directory) the Autorun.mscr but the file doesn't do anything. Even if I click autorun.mscr myself nothing happens. I'm using shamini 7.8 I believe.

murducky 08-18-2009 12:55 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by zone23 (Post 1108211)
I couldn't get it to work I can see the program try to launch (it makes the temp directory) the Autorun.mscr but the file doesn't do anything. Even if I click autorun.mscr myself nothing happens. I'm using shamini 7.8 I believe.
upgrade to 8.0, link can be found in my cabs, http://yourhaxer.com/files/cabs look for bengalih SASHIMI AutoInstaller RAW 8.0.zip

zone23 08-18-2009 02:23 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by murducky (Post 1108268)
upgrade to 8.0, link can be found in my cabs, http://yourhaxer.com/files/cabs look for bengalih SASHIMI AutoInstaller RAW 8.0.zip
OK great man that worked, thank you.

Alksion 08-18-2009 04:30 PM
Re: User Customization Backup for Touch Pro using sashimi
 
What about the little contact cards you flip through?

murducky 08-18-2009 05:01 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Quote:
Originally Posted by Alksion (Post 1108790)
What about the little contact cards you flip through?
see post 1 under manila

Manila/TouchFlo3d Fav Contacts Tab**
If you are using TouchFlo3d and want to save your favorite contacts that information is stored in the pim.vol file located in your root directory, just back that up. pim.vol also contains all of your contacts! No need to use pim backup app unless you want to save all ur txt messages, recent calls list, etc.

Alksion 08-18-2009 05:07 PM
Re: User Customization Backup for Touch Pro using sashimi
 
Sorry I'm not trying to make a hassle :/ but where is my root directory.


All times are GMT -4. The time now is 04:20 AM.
Page 2 of 9 1 2 34 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0