Sprint Touch Pro 2 PRI 2.20_003
 

This is the PRI from the Sprint 6.5 update. Some people say that it may improve call quality. YMMV. There should be no ill effects from installing this to your device. You can check your pri version by going to settings, system,and selecting device information. If you have 1.42_003, upgrade, if you already have 2.20_003, you don't need to. If you applied the Sprint 6.5 update ROM you should already have it but you can check anyways.(many are saying that the 6.5 update does not infact install this update by default so you may not have it even if you did update.)

How to:
1. Download and install attached cab.
2. Go to your windows folder and find ppst.exe.
3. Open the program and press ok to proceed with update.
4. Once update is completed press ok to restart your device.
5. Once device is restarted check device info to confirm update.
Done

Re: Sprint Touch Pro 2 PRI 2.20_003
 

reserved

Re: Sprint Touch Pro 2 PRI 2.20_003
 

one more

Re: Sprint Touch Pro 2 PRI 2.20_003
 

Thanks, I had already tried the official Sprint 6.5 update, but the PRI was never updated for some reason. The CAB worked fine! Thanks!

PS - Pressing OK did not restart the device for me. I waited a minute and restarted manually, and verified that the PRI was updated.

Re: Sprint Touch Pro 2 PRI 2.20_003
 

confused. You write that if we have the upgrade we should have the new PRI, but mine reads 1.42.003

so which value should be looking at that shows us the 2.20_003?

Very confused as to this posting.

Re: Sprint Touch Pro 2 PRI 2.20_003
 

Huh? I have the Sprint 6.5 update, but my PRI is also 1.42_003. So where did this come from? If this was from the Sprint update, why isn't it already installed (?)...

Re: Sprint Touch Pro 2 PRI 2.20_003
 

Okay, good, I'm not the only one confused as to this post.

can you please elaborate or not be so confusing in your original post, please?

Re: Sprint Touch Pro 2 PRI 2.20_003
 

Apparently the 6.5 update does not update the pri. just follow the steps in the first post. This cab came straight from the official sprint update.

Re: Sprint Touch Pro 2 PRI 2.20_003
 

You're missing important steps here. even if we dial ##778# (which you don't mention how to get to as well) and get into epst we need (or at least you need to tell people) how to get their MSID (MSL code) perhaps get an application such as the following to figure it out:

http://forum.ppcgeeks.com/showthread.php?t=17667

You're telling folks a lot of technical things where they'll get stuck doing them. I only know this because I've done all this. But for those who don't know, ALL of this is necessary as is the GETSPL application if they don't want to call sprint and have to deal with them.

Thanks for the upgrade information, but you need to include a lot more detail here.

Also, can you say what is included in this PRI update and why it's necessary?

I stand corrected, I tried your method, apparently this works without entering th MSL. Not sure what it does though. Would like more explanation.

Re: Sprint Touch Pro 2 PRI 2.20_003
 

This is from the official update, but it doesn't update it? :scratch: