Can't access miniSD card

kcallis · #1 (**permalink**) 12-24-2008, 07:41 AM

I just reflashed my VX-6700 using BuildOS 9.05 and build 20931_0409 (I am not sure if that is the pertinent numbers). The build work nicely, although occassionally, I have issue with G'Roloc... When I rebooted, I found that I could not see my miniSD card. I pulled the card and stuck it into my laptop and all the files are there, but when I put the card into the phone, absolutely nothing.
Any pointers on what I can do to get it readable? I have updated BuildOS, so I am at a loss...

**weedahoe** · #2 (**permalink**) 12-24-2008, 09:07 AM

I would suggest reflashing after doing a hard reset first. At least you know the card work. Good thinking your on part. All you can have wrong at this point is a bad card reader in the device or a bad flash.

kcallis · #3 (**permalink**) 12-24-2008, 11:28 AM

Quote:

Originally Posted by weedahoe

I would suggest reflashing after doing a hard reset first. At least you know the card work. Good thinking your on part. All you can have wrong at this point is a bad card reader in the device or a bad flash.

I think that in my haste, I missed actually loading the sd driver... I just happened to see that, so I will see if that is what was giving me grief...

psiphi · #4 (**permalink**) 12-24-2008, 12:08 PM

You can probably just use the SDHD driver Cab if you don't won't to have to re-flash...

**weedahoe** · #5 (**permalink**) 12-24-2008, 01:43 PM

Quote:

Originally Posted by psiphi

You can probably just use the SDHD driver Cab if you don't won't to have to re-flash...

Good idea, try this link and DL those drivers and see if that resolves it.

kcallis · #6 (**permalink**) 12-24-2008, 04:46 PM

That was what my problem was... I completely missed the SD drivers when I was building... Too many options jumping out at me!