PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Windows Mobile Software (http://forum.ppcgeeks.com/forumdisplay.php?f=23)
-   -   [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1 (http://forum.ppcgeeks.com/showthread.php?t=111602)

Wideawake 03-02-2010 03:09 AM

Re: [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1
 
Quote:

Originally Posted by shaggylive (Post 1601121)
well, there's always mortscript, till that framwork code shows up ](*,)

Not the biggest fan of mortscript, I dunno what to do. I can search for any file type and get results from all over device and sd, but I search for nbh and it only looks in root of sd regardless. This is frustrating.... :angry2:
~mike

horndoctor 03-02-2010 03:30 AM

Re: [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1
 
Thanks for your work on this Mike!! :thumbleft:
Good Luck working out the issues!!
Maybe you could set it up so it would look in a specific folder for the time being. Then tell users to create a folder on the card named "nbh" or something. :dontknow:

Wideawake 03-02-2010 11:27 AM

Re: [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1
 
Quote:

Originally Posted by horndoctor (Post 1601153)
Thanks for your work on this Mike!! :thumbleft:
Good Luck working out the issues!!
Maybe you could set it up so it would look in a specific folder for the time being. Then tell users to create a folder on the card named "nbh" or something. :dontknow:

Np horndoctor thank you for saying thx and good luck! I need it at this point. The thing is it won't look in other folders for .nbh just the root of sd card. Very odd, but I'm sure its OS almost 99.9% sure. angry9:

DAM 03-02-2010 06:20 PM

Re: [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1
 
Ok, I'm a little lost here. I extracted one of Mightymike's ROM and put the ruu_signed.nbh in the root of my SD card. Used the program and it found it, but when I tell it to flash (after I selected TP2) it doesn't do anything. What am I missing.

Edit: One thing I did notice is that it did rename the file though. Do I need to do anything in order to execute the flash?

Edit 2: Nevermind, removed the NBH, copied it again and tried it again and it's flashing as we speak! Thank you!

thank you,

dam

DAM 03-02-2010 06:58 PM

Re: [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1
 
Ok, so it went into the boot loader (tri screen) and nothing happened. Removed the battery and I'm back in the phone, but the flash never happened. Thoughts?

dam

Wideawake 03-02-2010 07:50 PM

Re: [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1
 
Quote:

Originally Posted by DAM (Post 1602381)
Ok, so it went into the boot loader (tri screen) and nothing happened. Removed the battery and I'm back in the phone, but the flash never happened. Thoughts?

dam

Im gonna clean up some of your posts, but you have to be unlocked with hspl before the flash will work. Sounds like you haven't unlocked yet. If you check enter bootloader and it renames the file, then it should send itself into bootloader and load the rom after you press power button to continue.
~mike

DAM 03-02-2010 09:09 PM

Re: [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1
 
Quote:

Originally Posted by Wideawake (Post 1602489)
Im gonna clean up some of your posts, but you have to be unlocked with hspl before the flash will work. Sounds like you haven't unlocked yet. If you check enter bootloader and it renames the file, then it should send itself into bootloader and load the rom after you press power button to continue.
~mike

I'm assuming I'm unlocked otherwise I would not have been able to load the Mightymike ROMs I've been using for the past couple months. Any other ideas? And sorry for the multiple posts, feel free to edit as needed.

dam

Wideawake 03-02-2010 09:39 PM

Re: [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1
 
Quote:

Originally Posted by DAM (Post 1602651)
I'm assuming I'm unlocked otherwise I would not have been able to load the Mightymike ROMs I've been using for the past couple months. Any other ideas? And sorry for the multiple posts, feel free to edit as needed.

dam

If you have flashed other roms and your using the TP2, then I'm not sure what the issue is here. :scratch: What does the app rename the .nbh too?
~mike

DAM 03-02-2010 09:43 PM

Re: [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1
 
It renames it to RHODIMG.nbh, so it seems to be working partially, but it just doesn't flash it. :( Thank you for your help.

So, here is what I'm doing step by step.

1. Extract ruu_signed.nbm from Mightymike's ROM.
2. Move it to the SD card root directory.
3. Start SD FROM Flaser.
4. Go to settings and select TP2.
5. Go to Find ROMs and select my ROM.
6. Go to Flash and confirm flash.

dam

Wideawake 03-02-2010 09:55 PM

Re: [WM][Feb 28] PPCGeeks SD ROM Flasher v1.1
 
Quote:

Originally Posted by DAM (Post 1602722)
It renames it to RHODIMG.nbh, so it seems to be working partially, but it just doesn't flash it. :( Thank you for your help.

So, here is what I'm doing step by step.

1. Extract ruu_signed.nbm from Mightymike's ROM.
2. Move it to the SD card root directory.
3. Start SD FROM Flaser.
4. Go to settings and select TP2.
5. Go to Find ROMs and select my ROM.
6. Go to Flash and confirm flash.

dam

This is strange, I have a TP2 and have flashed at least a handful of times with no issues. Sorry Im not sure what's going on to be honest.
~mike


All times are GMT -4. The time now is 03:10 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0