Upgrading Radio
 

So I am running Olipro 2.4
I upgraded my Rom to DCD 3.26
But when I run the Rom Update Utility to update my Radio to 3.42.50 it goes to 8 percent then says I can't use that update utility. I was previously running DCD 2.3.2 radio version 3.27. Any suggestions? Do I have to upgrade to 3.35.04 or something before I can go straight to 3.42.5?

Re: Upgrading Radio
 

Try a SD card flash. Rename the NBH file to TITAIMG.nbh and just stuff it on the storage card and reboot to bootloader mode.

Re: Upgrading Radio
 

If your doing it through usb you have to have olipro 1.2 unlocker flash the radio then upgrade back to olipro 2.40 and flash the rom.

Re: Upgrading Radio
 

I reccommend using the 3.42.40 raido. The .50 radio has not been proven to be any better, but with .40 you don't have to flash 1.20 bl the reflash 2.40 bl. Just my opinion.

Re: Upgrading Radio
 

I'm in exactly the same situation as doggmah. I have Olipro 2.40. Tried the RUU utilitiy and got the same error.

I just tried the SD flash by naming the radio TITAIMG.nbh in root of SD card, going into BL mode (camera) (power) (reset).

I see the Olipro 2.40 boot loader screen with "serial" on the bottom and that's it.

Am I missing a keyboard command or something to get this to work?

Re: Upgrading Radio
 

Make sure that your SD card is FAT32
Put it in your computer, right click the drive and go to properties, it will most likely say FAT.
Format it with FAT32 selected and then try again, should work.

Re: Upgrading Radio
 

I put the 4GB SanDisk into a PC, copied the data to the hard drive, formatted to FAT32 and recopied the data.

Go into BL mode, see the same line 1: TITA100 MFG, line 2: SPL-2.40.Olipro, line 3: CPLD-9

Like this:

TITA100 MFG
SPL-2.40.Olipro
CPLD-9


And at the bottom:

Serial

I'm lost. I tried to flash to SPL-2.47.exe via the same SD Card - doesn't work and gives me the SPL-2.07 BL screen. When I reset, the device goes back to SPL 2.40 Olipro and the No2Chem 5066 ROM that I put flashed a month ago.

I'm just trying to upgrade the radio.

Here's what I have now:

ROM: 3.49.NO2.5066
Radio: 3.35.04
PRL version: 51056
PRi version: 1.35_002

Looks like I'll have to downgrade to 1.20 Olipro to use RUU?

Any thoughts?

Thanks!

Re: Upgrading Radio
 

Must be a 2GB card or smaller...

Re: Upgrading Radio
 

Correct, you cannot use a HC card.

Re: Upgrading Radio
 

Hey!

Thanks, guys.

I guess that I missed that in the other threads that I was reading.

Re: Upgrading Radio
 

I bought a 2 GB SanDisk Micro.

That was it! The radio flashed without a prob!

Thanks, again!

Re: Upgrading Radio
 

Glad to hear it worked. Feel free to thank me if you wish.

Re: Upgrading Radio
 

im trying to load the same radio and i keep trying did everything it just wont upgrade.any other thoughts

Re: Upgrading Radio
 

Define "just won't upgrade". The more specific the better we can help you.

Re: Upgrading Radio
 

sorry didnt know u wrote back every time i go look at device info it is the same radio.once i do the sd flash and flash it it is the same.do u think it could be when i first started to do this stuff on my phone i messed up and set the .nbh files to open with windows mobile device center.if it is could you see what the default program i need to change it back to.

Re: Upgrading Radio
 

i wrote a little tutorial for someone in another forum which deals with loading the radio from the USB cable/ basically u have to downgrade the bootloader to olipro 1.20 to load these gps radios / i so written a quick tutorial and included a link to necessary files, maybe it might help
================================================== ============
heres the link to the post and ill copy and paste it here also i guess/
================================================== ===

http://forum.xda-developers.com/show...=423624&page=2
================================================== ===========

1)First run the "titan RELOCKER" file with your

phone connected to active

sync, it should return your

phone to the stock

bootloader/

2)Next run the "titan unlocker"

next , this will allow u to

install olipro 1.20/ after

running the unlocker and

following its instructions u

might be in bootloader mode

if i remember right

3) your phone should be in

bootloader mode now,(if it

aint, put it in boot mode) so

just run the "ROM update

utility" in the "olipro 1.20

unlocker" folder im sending u

k/
** u may still be in

bootloader mode when u r done

installing the 1.20 BL, NO

PROBLEM, just run the

DisconnectActiveSync.exe file

first in the "Unlockboot

folder" i have included, THEN

the "titan_exitbl.exe"/
THIS should cause your phone

to reboot.

4)next i believe we r ready

to load radio ( for some

reason the radios can only be

installed using olipro 1.20)
in the folder i have the

radio in, u will run the ROM

update utility and install

the radio.

5) Next u will need to update

your bootloader to 2.40, so

that u can load a custom rom.
Just run the

"Hard-240SPL-MFG.exe" file

ive included and it should

update u with no problems,

Once this has been done u can

now go and install ROM of

your choice/ *** PPCKITCHEN latest rom release allows MMS for us cricket folks**** and if u installed the ROM and cant get the MMS to work just PM me and ill give u the instructions to enable it, there is some adjustment that will need to be made first , so dont worry , we will get it working k**

6) well my friend this has

taken alot out of me/ i will

post these instructions im

giving u under your thread

that way incase i have missed

something, somebody can

inform us/

PS GOOD LUCK MY FRIEND, and

if u get stuck or have a

question, just PM me, but if

i dont get back to u right

away, be patient, k


heres a link to all the neccessary files, its to big to add as an attachement:

http://rs568tg.rapidshare.com/files/...LOCK_files.rar

bunvilla