PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Titan Development (http://forum.ppcgeeks.com/forumdisplay.php?f=57)
-   -   Stuck, Progress bar won't move during unlock (http://forum.ppcgeeks.com/showthread.php?t=34012)

Slevin 08-05-2008 11:13 AM

Stuck, Progress bar won't move during unlock
 
Hi,

This is like my 3rd phone from sprint, but for some reason I can't get this one unlocked and updated. I'm trying to run the Olipro-2.40 unlocker and it gets to the point with the progress bar, but never moves over 0%. I also tried the nuespl unlocker from SD, but that didn't seem to work either. I've tried on Vista as well as my work XP workstation and same results. Any help...I hate this stock sprint ROM. Thanks.

-Slevin

cornelious2 08-05-2008 11:17 AM

Re: Stuck, Progress bar won't move during unlock
 
try updating to the latest rom on HTC's website, then running the nuespl

Slevin 08-05-2008 11:22 AM

Re: Stuck, Progress bar won't move during unlock
 
I did that as soon as I got the new phone from asurion, I have the latest sprint rom, 3.56 and radio 3.42.02

-Slevin

cornelious2 08-05-2008 11:40 AM

Re: Stuck, Progress bar won't move during unlock
 
when you tried to install nueSPL, I assume your sd card was already formated fat32? if it is, try formating it to fat with a reader, then when you run the nueSPL, it will make you format it again to fat 32.

Slevin 08-05-2008 01:18 PM

Re: Stuck, Progress bar won't move during unlock
 
Quote:

Originally Posted by cornelious2 (Post 372111)
when you tried to install nueSPL, I assume your sd card was already formated fat32? if it is, try formating it to fat with a reader, then when you run the nueSPL, it will make you format it again to fat 32.

I used a blank card when trying to use nueSPL, and it asked to format it to FAT32, I said ok, I got green check's across the board and it rebooted, but didn't update the bootloader??? I'm not sure why this phone is giving me such problems, grrr.

-Slevin

cornelious2 08-05-2008 01:20 PM

Re: Stuck, Progress bar won't move during unlock
 
hold the camera button and hit the reset button, once its in the bootloader tell me what numbers and words you see.

Slevin 08-05-2008 02:18 PM

Re: Stuck, Progress bar won't move during unlock
 
Quote:

Originally Posted by cornelious2 (Post 372251)
hold the camera button and hit the reset button, once its in the bootloader tell me what numbers and words you see.

I couldn't get it in bootloader by holding the camera and reset, so I ran the unlock again. This is what is displayed:

TITA100
SPL-2.07.0000
CPLD-9

-Slevin

GaMedic 08-05-2008 02:40 PM

Re: Stuck, Progress bar won't move during unlock
 
Quote:

Originally Posted by Slevin (Post 372324)
I couldn't get it in bootloader by holding the camera and reset, so I ran the unlock again. This is what is displayed:

TITA100
SPL-2.07.0000
CPLD-9

-Slevin

To get into bootloader you hit power, camera, reset. Make sure you hold all three for about 2-3 seconds. The spl you have is not the updated one. The spl should read 2.47 when you have done it correctly.

cornelious2 08-05-2008 02:53 PM

Re: Stuck, Progress bar won't move during unlock
 
oh my bad its camera + power + reset but you figured it out

Slevin 08-05-2008 03:24 PM

Re: Stuck, Progress bar won't move during unlock
 
Quote:

Originally Posted by cornelious2 (Post 372367)
oh my bad its camera + power + reset but you figured it out

haha, yeah. But from above it appears to still have the stock SPL?

-Slevin


All times are GMT -4. The time now is 03:19 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0