PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Titan Development (http://forum.ppcgeeks.com/forumdisplay.php?f=57)
-   -   nueROM 2.2 Bleeding Edge Report Thread (http://forum.ppcgeeks.com/showthread.php?t=32231)

Formula84 07-22-2008 09:31 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Hey n2c have you seen this post about video driver progress? any ideas...
http://forum.ppcgeeks.com/showpost.p...&postcount=24v

puff 07-22-2008 09:37 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by fabdelkader (Post 356829)
Any reason why I am restricted to accessing the download? or link for that matteR?:twisted:

Try this link -> here :D

leetsauce 07-22-2008 09:51 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
ROM Version you are running: 5770-pre8
Applications you have installed: SPB Pocket Plus
Carrier: Sprint

Describe concisely, the issue you are experiencing: IE causes phone to halt and lock up after WiFi is switched on; otherwise IE works fine on EVDO. Soft reset will fix temporarily, as issue resurfaces after a while.

Describe, step by step how to reproduce this issue:
For example, for the issue previously discussed:
1. Boot phone.
2. Switch WiFi on.
3. Run Internet Explorer.
4. Device locks up.

Describe what you expected to happen:
IE should work properly as expected.

mugsy77 07-22-2008 11:32 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Ref Pre-8, what can cause the Titan to stay on and not power off on set time on battery power under Power/Battery Settings? (intermittently sometimes) It is set for 60 secs yet it seems to never go off

mugsy77 07-22-2008 11:35 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by cryllic (Post 354832)
I had that problem before, and it seemed to be from the version of HTC X-Button I had at the time. I think it was the big button version. Try removing X-Button and seeing if that still affects WMP.


I get this problem with base no2 and dcd for whatever friggin reason WMP runs outta memory, even starting with 20mb+. The error is "Not enough storage is available to complete this operation" when running simple 3-4mb mp3/wma files. WMP might be bad, but not this bad. =p

Lunatik 07-23-2008 07:52 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Has anyone noticed more of a battery drain on Pre8? It seems like the power goes down much faster than it did for 5069.

Also for some reason I get a cannot execute powernot.exe. I'm wondering if something is conflicting.

Hajii1 07-23-2008 08:45 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
nueROM v2.2 build 5770-pre8
GPSviewer, GPSToggle, HTC Home, Opera 9.5 Beta, Google Maps
Appalachian Wireless

Once a data connection is established the phone will not put the data into standby, once data is no longer being retrieved (the arrows above the signal bars stay solid white and do not gray out). This prevents phone calls from being received, sending all incoming calls to voicemail.

1. Open Outlook
2. Send/Receive
3. Data connection stays active untill killed in comm manager or rebooting.

I expected the phone to put data into standby when not actively sending or receiving.

Hajii1 07-23-2008 08:52 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
nueROM v2.2 build 5770-pre8
GPSviewer, GPSToggle, HTC Home, Opera 9.5 Beta, Google Maps
Appalachian Wireless

If you change the "Show on title bar: Clock" to "Show on title bar: Battery" within Advanced Configuration, the battery icon that shows on the title bar is messed up. If you select the icon with the stylus yo get an error message: "The file 'powerexe' cannot be opened. Either it is not signed with a trusted certificate, or one of its its components cannot be found. If the problem persists, try reinstalling or resotring this file."

1. Open Advanced Configuration
2.
Change the "Show on title bar: Clock" to "Show on title bar: Battery"
3. Reboot phone and icon is messed up.
4. Select the icon with the stylus and receive error message.

I would like the option to remove the clock and use the battery icon, but currently it is messed up.

nFKT 07-23-2008 09:08 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by Hajii1 (Post 357763)
nueROM v2.2 build 5770-pre8
GPSviewer, GPSToggle, HTC Home, Opera 9.5 Beta, Google Maps
Appalachian Wireless

If you change the "Show on title bar: Clock" to "Show on title bar: Battery" within Advanced Configuration, the battery icon that shows on the title bar is messed up. If you select the icon with the stylus yo get an error message: "The file 'powerexe' cannot be opened. Either it is not signed with a trusted certificate, or one of its its components cannot be found. If the problem persists, try reinstalling or resotring this file."

1. Open Advanced Configuration
2.
Change the "Show on title bar: Clock" to "Show on title bar: Battery"
3. Reboot phone and icon is messed up.
4. Select the icon with the stylus and receive error message.

I would like the option to remove the clock and use the battery icon, but currently it is messed up.

Seconding this issue, though for me it has something to do with HTC Home or WKTask

bedoig 07-23-2008 04:19 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by Hajii1 (Post 357757)
nueROM v2.2 build 5770-pre8
GPSviewer, GPSToggle, HTC Home, Opera 9.5 Beta, Google Maps
Appalachian Wireless

Once a data connection is established the phone will not put the data into standby, once data is no longer being retrieved (the arrows above the signal bars stay solid white and do not gray out). This prevents phone calls from being received, sending all incoming calls to voicemail.

1. Open Outlook
2. Send/Receive
3. Data connection stays active untill killed in comm manager or rebooting.

I expected the phone to put data into standby when not actively sending or receiving.

Have you actually experienced calls going to voicemail? The reason I ask is that calls should come through regardless of wether data is being received (unless your phone somehow got locked in EVDO only mode). I don't think that has been an issue since the early days of the 6700, and it was adjustable through a registry change to EVDORingThrough or something like that. I think that the solid data arrows are a result of the dialer being used - some of them break the functionality of the active/passive data indicator on CDMA phones. Which is also why ## codes are broken, and why no2chem put an EPST config shortcut in the advanced config folder. I would be interested in having the data arrows function correctly though. I kind of miss that. I wonder if the dialer itself needs to be swapped, or if it is just some kind of configuration that needs to be changed.

paravis 07-23-2008 04:55 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by Hajii1 (Post 357763)
nueROM v2.2 build 5770-pre8
GPSviewer, GPSToggle, HTC Home, Opera 9.5 Beta, Google Maps
Appalachian Wireless

If you change the "Show on title bar: Clock" to "Show on title bar: Battery" within Advanced Configuration, the battery icon that shows on the title bar is messed up. If you select the icon with the stylus yo get an error message: "The file 'powerexe' cannot be opened. Either it is not signed with a trusted certificate, or one of its its components cannot be found. If the problem persists, try reinstalling or resotring this file."

1. Open Advanced Configuration
2.
Change the "Show on title bar: Clock" to "Show on title bar: Battery"
3. Reboot phone and icon is messed up.
4. Select the icon with the stylus and receive error message.

I would like the option to remove the clock and use the battery icon, but currently it is messed up.

Could be wrong, but this might be a problem that Schap can help ya fix. Advanced Configuration is not one of no2's tools (he wisely includes it in his roms), but created by Schap @ xda (I don't see his username here @ ppcgeeks):
http://forum.xda-developers.com/showthread.php?t=317070

Maybe you might find the problem reported in that thread, or if not ask there for some help? Worth a shot.

Hajii1 07-23-2008 07:38 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by bedoig (Post 358271)
Have you actually experienced calls going to voicemail? The reason I ask is that calls should come through regardless of wether data is being received (unless your phone somehow got locked in EVDO only mode). I don't think that has been an issue since the early days of the 6700, and it was adjustable through a registry change to EVDORingThrough or something like that. I think that the solid data arrows are a result of the dialer being used - some of them break the functionality of the active/passive data indicator on CDMA phones. Which is also why ## codes are broken, and why no2chem put an EPST config shortcut in the advanced config folder. I would be interested in having the data arrows function correctly though. I kind of miss that. I wonder if the dialer itself needs to be swapped, or if it is just some kind of configuration that needs to be changed.

I'm postive this is the case, being that I've tested it on several occasions. When my phone (regardless of rom) is in the process of sending or receiving data, calls are routed to voicemail. This is the same for two co-workers of mine who have the same phone on the same network. Speaking of network, ours doesn't even offer evdo yet (though it seems to be configured for it) so I'm wondering if there is an issue with the settings from our carrier.

Hajii1 07-23-2008 07:41 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by paravis (Post 358306)
Could be wrong, but this might be a problem that Schap can help ya fix. Advanced Configuration is not one of no2's tools (he wisely includes it in his roms), but created by Schap @ xda (I don't see his username here @ ppcgeeks):
http://forum.xda-developers.com/showthread.php?t=317070

Maybe you might find the problem reported in that thread, or if not ask there for some help? Worth a shot.

I think the issue (as already stated) is related to the HTC Home plugin. The plugin puts the battery indicator in the title bar regardless of rom so I'm thinking perhaps its conflicting with whatever icon advanced config/nurom is using.

shaggylive 07-23-2008 08:26 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by Hajii1 (Post 357757)
nueROM v2.2 build 5770-pre8
GPSviewer, GPSToggle, HTC Home, Opera 9.5 Beta, Google Maps
Appalachian Wireless

Once a data connection is established the phone will not put the data into standby, once data is no longer being retrieved (the arrows above the signal bars stay solid white and do not gray out). This prevents phone calls from being received, sending all incoming calls to voicemail.

1. Open Outlook
2. Send/Receive
3. Data connection stays active untill killed in comm manager or rebooting.

I expected the phone to put data into standby when not actively sending or receiving.

Quote:

Originally Posted by Hajii1 (Post 358479)
I'm postive this is the case, being that I've tested it on several occasions. When my phone (regardless of rom) is in the process of sending or receiving data, calls are routed to voicemail. This is the same for two co-workers of mine who have the same phone on the same network. Speaking of network, ours doesn't even offer evdo yet (though it seems to be configured for it) so I'm wondering if there is an issue with the settings from our carrier.

thanks for clarifying all that, yes, I suspect it's the carrier, but I also wonder that, if there is an issue with data pwr mgt, that could be the battery hit ppl seem to have.

edit; you can have the data disconnected if no activity for x=min in schaps advanced config

alraune 07-24-2008 08:58 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Ok i know this question has been asked 5 million times. Just make me 5 million and 1... But has anyone found a fix to the choppy BT issues? I went months without using my bluetooth headset because of the issue.. Now once again they are saying holding a phone to your head causes cancer so i repaired my BT headset and amd so sick of the choppiness. Please help anyone?

toviaheli 07-24-2008 09:55 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Confirmation of the AutoClosing Application Problem in the discussion thread in relation to Pre8:

http://forum.ppcgeeks.com/showthread...857#post359857
Quote:

Originally Posted by holo (Post 359758)
The app closing problem is becoming more and more annoying - I imagine it is related to this wm build being made for devices with significantly more ram so when it gets down under 15 or so it starts to think it is out of ram and needs to close apps? It doesn't happen on fresh boot when I have 20+ free only when it starts to run under about 15 or so.....

Has there been any progress getting this fixed? Much older builds of nuerom did not have this problem....


blake05 07-25-2008 09:01 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by bedoig (Post 358271)
Have you actually experienced calls going to voicemail? The reason I ask is that calls should come through regardless of wether data is being received (unless your phone somehow got locked in EVDO only mode). I don't think that has been an issue since the early days of the 6700, and it was adjustable through a registry change to EVDORingThrough or something like that. I think that the solid data arrows are a result of the dialer being used - some of them break the functionality of the active/passive data indicator on CDMA phones. Which is also why ## codes are broken, and why no2chem put an EPST config shortcut in the advanced config folder. I would be interested in having the data arrows function correctly though. I kind of miss that. I wonder if the dialer itself needs to be swapped, or if it is just some kind of configuration that needs to be changed.

I just wanted everyone to know that after upgrading to 2.2 v6 and v8, all my calls were deverted to voicemail. and all my text messages and alerts coming in were delayed a few hours. Everything going out was fine. I called alltel, and they ran diagnostics for a few hours and they said the issue was on there end. something about the dlr(can't remeber the term) was messed up on there end where they had to unregister me from the towers and reregister... anyways calling alltel fixed my problems.

paravis 07-26-2008 02:51 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by toviaheli (Post 359859)
Confirmation of the AutoClosing Application Problem in the discussion thread in relation to Pre8:

http://forum.ppcgeeks.com/showthread...857#post359857

You need to list the apps you're running; this has been a recurring problem with many builds, but many, including myself, found that RAM recovery apps such as Oxios, was the cause.

For me, Oxios was the culprit. I've since stopped using it, and no longer have the auto-closing problem.

toviaheli 07-26-2008 04:43 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by paravis (Post 361503)
You need to list the apps you're running; this has been a recurring problem with many builds, but many, including myself, found that RAM recovery apps such as Oxios, was the cause.

For me, Oxios was the culprit. I've since stopped using it, and no longer have the auto-closing problem.

Thanks for the advice...look a few pages back for my first post on the subject listing what apps are (were) running. I've switched to DCD's latest until the problem is somehow resolved.

Just out of curiosity, what programs are you running since you do not have the problem? I found the problem systemic and persistent regardless of what was installed. Even ONE program running would close itself at random times with 17MG or more of memory available.

GhettoBSD 07-28-2008 12:23 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
no2chem 2.2pre8

Apps:
AE Button Plus
Shadowmite DTMFVibrate
ProkectION Pocket Digital Clock
Code North PocketIRC
A_C S2P
Spb Mobile Shell, Suite and Time
Google Maps
Sprint

Issue 1:
When in voice mail, notable lag (3-5 seconds) until commands are recognized. When system says "press one to hear message" i press one and the lag hit, then message is played. Same with all key entries in voice mail. Never had this problem before with any other versions.

Expected:
Same (no lag) as previous custom builds

Issue 2:
When i hold the power button phone asks me if i want to turn it off ok/cancel. I've lost the nue screen with multiple options. This happened after i installed most software. I am guessing it's the SPB stuff.

Expected:
Nue menu options.

Work around:
Soft reboot through pinhole.

Issue 3:Blue tooth is cutting in and out frequently, but it is still very usable. I notice i have more problems with it cutting in-n-out while walking than while on motorcycle. I have it paird with motorola S9 headphones.

Issue 4: Keyboard is still FUBAR. Typing slowly doesn't matter and it's getting more and more frustrating every day especially since grafitti doesn't come stock on this rom! arrrg :P

yznhmr 07-28-2008 01:05 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Issue 3:Blue tooth is cutting in and out frequently, but it is still very usable. I notice i have more problems with it cutting in-n-out while walking than while on motorcycle. I have it paird with motorola S9 headphones.

I had this problem on several builds, i returned the headphones.
I now have the Jabra BT 8010 stereo kit, works well (minor choppyness, but WAY better than the S9)

yznhmr 07-28-2008 01:07 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
BTW how can you tell which of the PRE releases you are running? I forgot which one i had loaded last..

tsperez 07-28-2008 01:32 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by yznhmr (Post 363231)
BTW how can you tell which of the PRE releases you are running? I forgot which one i had loaded last..

When you think about it... this is very funny! :)

I know where you're coming from!

tsp

GhettoBSD 07-28-2008 02:11 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
I had been running release 5065 for a while, and didn't encounter issues with BT. I had also run the stock rom a while before i learned how to flash and didn't have any issues at all.

I personally love the S9 because it works great on my motorcycle. The controls are placed in the ideal position for me! (for my needs). But it could be the headset that is messin up.

Quote:

Originally Posted by yznhmr (Post 363229)
Issue 3:Blue tooth is cutting in and out frequently, but it is still very usable. I notice i have more problems with it cutting in-n-out while walking than while on motorcycle. I have it paird with motorola S9 headphones.

I had this problem on several builds, i returned the headphones.
I now have the Jabra BT 8010 stereo kit, works well (minor choppyness, but WAY better than the S9)


Hax0rpunk 07-28-2008 02:56 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
I tried flashing this ROM twice and both times after flashing it gets stuk at the HTC Splash screen. When I flash a DcD ROM I have no problems at all

opuscroakus 07-28-2008 03:08 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by Hax0rpunk (Post 363361)
I tried flashing this ROM twice and both times after flashing it gets stuk at the HTC Splash screen. When I flash a DcD ROM I have no problems at all

Remove the battery for 30 seconds and then replace. You should be good after that.

yznhmr 07-28-2008 05:17 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
ANYONE?
"BTW how can you tell which of the PRE releases you are running? I forgot which one i had loaded last.."

GhettoBSD 07-28-2008 06:35 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Ok i'm running pre-8.

this is the info i have:
rom version: 3.56.651.0 WWE
rom date: 06/16/08

build is 20270.1.3.1

tota 07-29-2008 02:43 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Rom: pre8
Carries:Sprint
Phone Mogul

problem: after installing official rom with radio 3.42 none of the Nu2chem roms actually load past the HTC logo, it shows the logo and in red letter th radio and rom numbers blink but after that it hangs


ohh and i was able to reflash it to DCD 3.2.4 and that boots then i tried an older nu2chem build 5069k i think and that also hangs then reflashed to official sprint again an it works

SBR_L3GION 07-29-2008 03:00 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by tota (Post 364023)
Rom: pre8
Carries:Sprint
Phone Mogul

problem: after installing official rom with radio 3.42 none of the Nu2chem roms actually load past the HTC logo, it shows the logo and in red letter th radio and rom numbers blink but after that it hangs


ohh and i was able to reflash it to DCD 3.2.4 and that boots then i tried an older nu2chem build 5069k i think and that also hangs then reflashed to official sprint again an it works

you have to pull the battery and hard reset after the flash.

MrHappy 07-29-2008 02:38 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
I posted this in the wrong thread and was told this was the correct place to pose this question/report possible bug...

ROM:pre8
Carrier:Sprint
Apps installed post flash:
TomTom
SPB Mobile Shell
MS Voice Command

I have not seen anyone talk about this so either it is just my machine or something wrong with nueLock..
Steps to reproduce:
1. Let the phone lock with nueLock
2. Call the phone from another line.
The new call popup fights with nueLock for the front position which causes the screen to flash/flicker.
You can not push the talk button to answer the call you have to quickly do the slide thing and hope you can then answer the call before it goes to VM.

Expected results:
nueLock should let the new call popup show on front and not fight with it..
should be able to press green talk button to answer call. (and I guess after that, be able to press red button to end call).

Also, the text in the center says you can slide OR use the hardware switch. is this the wifi switch? if so this does not work for me (might be because I have the switch set to control volume...

Edited: Sorry, re-read the first post and edited this to conform with guidelines..

EtherealRemnant 07-29-2008 06:36 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
I noticed this same behavior but never reported it. Too lazy I guess. lol

shaggylive 07-29-2008 11:06 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by MrHappy (Post 364467)
Expected results:
nueLock should let the new call popup show on front and not fight with it..
should be able to press green talk button to answer call. (and I guess after that, be able to press red button to end call).

not to beat a dead horse, but I would like this as an option. I don't want to bump the answer(or End) button when the phones in my pocket.

yznhmr 07-29-2008 11:14 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
what was it i had to change the file name to when flashing from SD?

puff 07-29-2008 11:16 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by yznhmr (Post 364992)
what was it i had to change the file name to when flashing from SD?

TITAIMG.nbh (and this is the wrong thread, so dont be suprized if this is deleted)

MrHappy 07-30-2008 12:00 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by shaggylive (Post 364986)
not to beat a dead horse, but I would like this as an option. I don't want to bump the answer(or End) button when the phones in my pocket.

Sorry, didn't know it was a dead horse but I have in fact had to turn off the key lock because I kept missing calls.

Another example. If I am in a call for long enough that the screen goes dark and a call comes in I am unable to flash over to the other call without having to slide the keyboard and by the time the phone is responsive enough for me to hit talk the call is already in voicemail...

shaggylive 07-30-2008 07:08 PM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by MrHappy (Post 365465)
Sorry, didn't know it was a dead horse but I have in fact had to turn off the key lock because I kept missing calls.

Another example. If I am in a call for long enough that the screen goes dark and a call comes in I am unable to flash over to the other call without having to slide the keyboard and by the time the phone is responsive enough for me to hit talk the call is already in voicemail...

No, I agree, that would be a problem.. I seem to be one of few (there are others though too) that wants all the buttons locked, when "locked". It wasn't until nuelock that I finally had this, and I have been looking for such a thing since I got my 6700. before my ppc phones I had flip phones, because, candybar phones didn't completely lock those buttons..
I was simply pointing out that it would be nice to have the option.

also hopefully no2chem is/will be working on nuelock so that the screen doesn't rotate for an "unlock" and that should drasticly speed up the time it takes to unlock. (also if/when the wifi switch is funtional for this than it should be less of an issue)

the reason I got a 6700 in the first place was I "needed" a bluetooth phone and was able to get it for free (instead of a basic phone) if a call comes in I don't want to bump the answer button on the phone, rather the button on the headset, but if you use the phone's button, it doesn't route the call to the headset. (may vary with different roms....)

I didn't mean to "discuss" in this thread, but mrhappy's report is a bug, and I just wanted remind no2chem that having the option is preffered. (if possible) thanks again for all the hard work, and fee free to delete.

eQuanoX 08-01-2008 11:14 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by MrHappy (Post 365465)
Sorry, didn't know it was a dead horse but I have in fact had to turn off the key lock because I kept missing calls.

Another example. If I am in a call for long enough that the screen goes dark and a call comes in I am unable to flash over to the other call without having to slide the keyboard and by the time the phone is responsive enough for me to hit talk the call is already in voicemail...

Same issue, just never reported and stopped using it.

eQuanoX 08-01-2008 11:43 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Dont know if this has been broached or not, but here it goes:

When i flashed the last previews 7 and 8, after flashing, my ROM and Radio still registers as
R -3.42 and D-3.56

i have flashed the official ROM before but dont think that i am suppose to continue to see this after flashing No2chem's ROM; am i suppose to see this? or should it mirror what the spl identifies it as (i.e. nue pre-8?, 7090? or something like that).

I am currently running Pre-8

BTW, i know (hope) that i am flashing the ROM correctly because i see the improvements/nue hardware/or fix, that no2chem explains he has completed. Any help would be much appreciated.

flyers2114 08-01-2008 11:45 AM

Re: nueROM 2.2 Bleeding Edge Report Thread
 
Quote:

Originally Posted by eQuanoX (Post 368157)
Dont know if this has been broached or not, but here it goes:

When i flashed the last previews 7 and 8, after flashing, my ROM and Radio still registers as
R -3.42 and D-3.56

i have flashed the official ROM before but dont think that i am suppose to continue to see this after flashing No2chem's ROM; am i suppose to see this? or should it mirror what the spl identifies it as (i.e. nue pre-8?, 7090? or something like that).

I am currently running Pre-8

BTW, i know (hope) that i am flashing the ROM correctly because i see the improvements/nue hardware/or fix, that no2chem explains he has completed. Any help would be much appreciated.


You are fine....it just has not been updated....


All times are GMT -4. The time now is 07:05 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0