Re: Arcsoft MMS cab - 5.0.31.7
 

For those of us who are still a little new to this, some help please.

I have read through the thread and know there is more to this install (from the .cab) than just adding it and everything works. I installed the cab, it installs fine but the MMS isn't in 'messaging'. Can't find it anywhere.

Where did it go? What else is needed. i have searched the forum and google and found nothing specific.

VX6800 Verizon, no2chem 5069-k

Re: Arcsoft MMS cab - 5.0.31.7
 

unlike the previous versions, this will actually integrate into your TEXT Messages.. so when you go to initiate a new text message, you should be hitting 'menu' on the bottom right, then it will offer you the selection of sending a picture or video... and go from there..

in the MMS Configuration make sure you have the Verizon Wireless server settings -
Server name: Verizon Wireless
Gateway: leave blank
Port Number : 80
Server Address: http://mms.vtext.com/servlets/mms

hope this helps ya.

Re: Arcsoft MMS cab - 5.0.31.7
 

Got ya... I kind of thought this since when receiving a message the header comes in as a regular text message. I figured there was more to the setup since taping download generates an error message.

But, where is the MMS configuration located, looked but cant find it.

Still kind of new to all this but learning fast.

FOUND IT! ALL WORKS WELL, THANKS...

Re: Arcsoft MMS cab - 5.0.31.7
 

When I click mark all as read it goes to mms settings. Will not send even after setting up configuration setting. I will continue to test.

Re: Arcsoft MMS cab - 5.0.31.7
 

Anyone have any idea how to get this to work with Alltel carrier? Ive lost my ability to send or recive mms after flashing with PPCkitchen. Alltel is telling me that there is a patch available from HTC to resolve it, but it seems to just be the same update that was being sent around by alltel...any ideas?...

Re: Arcsoft MMS cab - 5.0.31.7
 

perhaps u just need the alltel settings...


*edit* actually, murraydeath try this:
http://forum.ppcgeeks.com/showpost.p...4&postcount=19

post back and let us know if it works :mrgreen:

Re: Arcsoft MMS cab - 5.0.31.7
 

Will this work with the USCC network? if so, what are the settings?

Re: Arcsoft MMS cab - 5.0.31.7
 

I installed that cab and it still wasn't working...having said that I HAVE sent some pic messages to myself now...but most ppl I know are now asleep, so testing is gonna have to wait till it NOT 2am...

Fo some reason the server info WAS NOT changed with that cab so
I had to change some of the settings around though:


SERVER NAME: Alltell MMSC
GATEWAY: blank
PORT:8080
SERVER ADD: http://mms-mt.alltel.net/servlets/mms
CONNECT VIA: Alltel Wireless (also been told "The Internet" works too)
SIZE LIMIT: 300k
WAP: 2.0

Lemmie know if this helps anyone else...and Ill post tomorrow with a follow up...

Re: Arcsoft MMS cab - 5.0.31.7
 

I have a basic question here: Is this just a highfaluting text message? I don't have a text message package on my xv6800. Would using this "mms" be considered a text message and thus incur the 25 cent charge per use for texting?

Re: Arcsoft MMS cab - 5.0.31.7
 

if i install this and i have the MMS from the ROM, this installs over the 4.0, does it erase it? And then if i uninstall MMS 5, does 4 come back? thanks

Re: Arcsoft MMS cab - 5.0.31.7
 

OK I built a ROM without the MMS installed. I then installed this cab. I have yet to test the MMS functionality but I am having a serious problem with my SMS. When I try to type in any information the program starts trying to input words. Kinda like the predictive text. I turned off the the predictive text and all settings that auto correct under the input settings just to make sure that was not my issue. What happens is that I can begin typing a word and another word will show up greyed out. If I continue to type the word I want to type and hit space it enters the greyed out word and the word I typed together. The only way to get it not to input the greyed out word is to hit the back arrow key. This is very annoying and causes texting to take twice as long. Has anyone else experienced this and what is the fix?

Also in my regular email if I click menu and MARK ALL AS READ it sends me to MMS option screen instead of marking all emails as read. I did check in the kitchen to add mark all as read to the options under menu.

Both of these problems are very annoying. Please let me know if any of you know a fix. Thanks in advance for your help.


Edit: I found the answer to the text entry problem posted in the 19588 Kitchen. The answer was posted by Indagroove.

Quote:

Yes, this is settings with the Diamond keyboard. Select the diamond keypad, then click options and uncheck all boxes.

I am still looking for an answer to the mark all as read issue posted above.

Re: Arcsoft MMS cab - 5.0.31.7
 

Bump
Any Ideas on how to fix this yet?

Re: Arcsoft MMS cab - 5.0.31.7
 

OK...so after a decent amount of testing...I can safely say that I can once again send and receive SMS...I cannot however send or receive them using ArcSoft...
The message go to the outbox and never leave, and there seems to be no way to send/receive manually. But it works...for now...anyone got any ideas?


Thanks PUFF...

Re: Arcsoft MMS cab - 5.0.31.7
 

Anyone get this working with USCC?

Or figure out any other way to do MMS with USCC?

Re: Arcsoft MMS cab - 5.0.31.7
 

anyone get this working with ALLTEL, cause after the mms upgrade u can send but not recieve

Re: Arcsoft MMS cab - 5.0.31.7
 

If someone could post there registry details for you then you can just add the entrys you need to get it working. You may also try installing DCD's carrier cab. I attached it below.

Re: Arcsoft MMS cab - 5.0.31.7
 

Yes it does work for sprint u have to have a picture mail account

Re: Arcsoft MMS cab - 5.0.31.7
 

So you are saying this arcsoft cab is allowing you to send and receive picture messages? If so you are about to be bombarded by 100's of people who want to know your setup. No one has had arcsoft work on there phone because Sprint has picture messaging blocked.

Re: Arcsoft MMS cab - 5.0.31.7
 

Your prolly thinkin of sMMS which is for sprint users only... not Arcsoft :evil4:

Re: Arcsoft MMS cab - 5.0.31.7
 

Thats my guess. I know he would be paid good money if he got Arcsoft working:)

Re: Arcsoft MMS cab - 5.0.31.7
 

i'm having an unusual issue.. i can receive texts.. but i can't send them.... says server is not responding when i try to send.... any ideas?

Re: Arcsoft MMS cab - 5.0.31.7
 

Did this just start, or has it been going n sice install? Who is your provider?

Re: Arcsoft MMS cab - 5.0.31.7
 

verizon.. got it fixed now.. had to call verizon and have them update my profile since i upgraded the radio..

Re: Arcsoft MMS cab - 5.0.31.7
 

I have read this thread and havent seen any info on Bell so I will ask. Has anyone tested this on the Bell mobility network? If so how do I make it work?

Re: Arcsoft MMS cab - 5.0.31.7
 

Did you ever find a fix for this? I'm seeing the same issue!

Thanks....

Re: Arcsoft MMS cab - 5.0.31.7
 

I'm having a problem where I am not able to sent a MMS message. I'm on Verizon and have set up the connection as stated above and am running Arcsoft 5.0.31.11. I also ran DCD cab to configure it for the Verizon network. When I attempt to send a MMS I get a message stating either "Error: ok" or "Warning! Unable to send your message(s). Your message(s) will remain in the Drafts folder." Any ideas? Thanks!

Re: Arcsoft MMS cab - 5.0.31.7
 

I have verizon VX6800. I installed the cab and made sure the setting are right, but it still won't download an MMS. I only have old MMS messages, will it only be able to download new ones? When I click "Download" in an MMS it just kicks me back out to the list of all my MMS/SMS headers.

Re: Arcsoft MMS cab - 5.0.31.7
 

I am looking for the same information, I am looking to get this working for Bell mobility canada. I have been looking for about 3 days now and there is no information, can anyone help us out?

Re: Arcsoft MMS cab - 5.0.31.7
 

For those looking for USCC MMS, theres a cab over at xda.

http://forum.xda-developers.com/showthread.php?t=404345

works for me. woo. :)

Re: Arcsoft MMS cab - 5.0.31.7
 

i am running my sprint diamond on verizon and can not get picture mail to work i have tried several roms that dont have sprint pic mail in them and still no luck.... any ideas even tried dcd carrier cab for verizon

Re: Arcsoft MMS cab - 5.0.31.7
 

yes good

Re: Arcsoft MMS cab - 5.0.31.7
 

Hey Guys!
I am new to all this stuff and have absolutely no clue what any of it means
I just noticed today after purchasing the phone that MMS could not be sent..
Definitely sucks, but I was just wondering if anyone could help me install this CAB. Again, I have no clue what to do.

I am running on the Telus Network (Carrier) and would like to beable to send/receive MMS (Picture) messages

Add me on MSN or PM here
thewitchisdead@tough.com

Thanks!

Re: Arcsoft MMS cab - 5.0.31.7
 

Welcome, first we need to know which carrier device you have? VZW or Sprint? And do you have a data package or at least data not blocked? I dont think Sprint uses Arcsoft although I am sure someone will correct me if I am wrong. I do know VZW uses Arcsoft because I have VZW.

So if you are with VZW then you need to have a data package, install the Arcsoft cab and then configure Arcsoft for VZW. You can google those settings or search here on the board. They are likely in this same thread also but I didnt look. If you cannot find them just lemme know.

Re: Arcsoft MMS cab - 5.0.31.7
 

Hey, Thanks for the quick reply!
I'm actually located in Canada and use the Telus Network
Using the HTC S640 (Iris) haha forgot to mention that.
I do have a Data plan that includes MMS texting :)


Could I just use the CAB from verizon? And also, how do I install the cab, haha sorry.. I'm new to all of this and just really need MMS :P

Re: Arcsoft MMS cab - 5.0.31.7
 

Up!
Haha, Anyone have any information?

Re: Arcsoft MMS cab - 5.0.31.7
 

this is working great on my winmobile 6.5 efsfan rom on a sprint touch pro

Re: Arcsoft MMS cab - 5.0.31.7
 

You're awesome. Thanks.

Re: Arcsoft MMS cab - 5.0.31.7
 

what carrier is this for?

Re: Arcsoft MMS cab - 5.0.31.7
 

i loaded this cab on my alltel phone on verizon network. i go to messages and new messages choose mms and nothing happens. could someone pleas help me. my phone is a palm 700wx

Re: Arcsoft MMS cab - 5.0.31.7
 

Way wrong forum man. This is for xv6800, titan. Plus that mms cab is outdated. There are many new versions. search around.