PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Titan Development (http://forum.ppcgeeks.com/forumdisplay.php?f=57)
-   -   PPC XV6800 Will NOT Pass LOADING Screen (a Picture from PPCGeeks ROM) (http://forum.ppcgeeks.com/showthread.php?t=24850)

elude79 04-24-2008 01:12 PM

PPC XV6800 Will NOT Pass LOADING Screen (a Picture from PPCGeeks ROM)
 
Hi All,

Please help. I recently upgraded my XV6800 ROM with 1 of the ROM from here. ( Can't remember which one) But now its wont go pass LOADING Screen. I think i might have use PPCGEEKS version. Does anyone kow how to remove this bootup screen? I am w/ Verizon.

Thanks

PS. DEATH XV6800, ROM Wont LOAD>
:violent2:

peepeesea 04-24-2008 01:13 PM

Re: PPC XV6800 Will NOT Pass LOADING Screen (a Picture from PPCGeeks ROM)
 
did you try resetting the device? you may just need to reflash it

elude79 04-24-2008 06:28 PM

Re: PPC XV6800 Will NOT Pass LOADING Screen (a Picture from PPCGeeks ROM)
 
](*,)Hi,

Thank you for your fast respond. Yes, i did all kinda reset and still no good.

1. Tried. Soft reset.
2. Tried. Hard reset.
3. Remove Battery.
4. Reflash to diff. ROMs.
All above has been done over and over manytime but still no luck.

Also, how can i get rid of the PPCGeeks Kitchen and LOADING picture at bootup? I am pretty much got stuck in this screen since lastnite and there isn't nothing i can do.

Please help me... I just bought this phone not too long ago.

Thanks in advance for all the helps.

puff 04-24-2008 06:35 PM

Re: PPC XV6800 Will NOT Pass LOADING Screen (a Picture from PPCGeeks ROM)
 
press power + camera + soft reset
once in bootloader, what numbers do you see?

elude79 04-24-2008 09:15 PM

Re: PPC XV6800 Will NOT Pass LOADING Screen (a Picture from PPCGeeks ROM)
 
Hi,

With Power/Camera/Soft reset pressed.
This is what is whown:

In BOOT SCreen:
TITA100 MFG
SPL-2.40.Olipro
CPLD-9

When Soft Reset this is what is shown:
Bootup Wallpaper with: PPCGEEKd and PPCKitchen.org Present.
p. dcaaxam-4350
r. 3.27.00
d. 2.17
Then it's go to another Picture shown as LOADING and that's it.
It's won't go ay further.

Please help!!!

I flashed w/ couples other ROM before and nothing like this. Also, I tried VBluc ROM and it all good, but when using the phone it not working. ROM Is working, but you can't hear anything. Also, when try to use the speaker phone, phone just reset itself.

How can i remove this PPCGeeks and PPCkitchen Bootup screen?

Thank you very much

puff 04-24-2008 11:52 PM

Re: PPC XV6800 Will NOT Pass LOADING Screen (a Picture from PPCGeeks ROM)
 
Quote:

Originally Posted by elude79 (Post 259420)
Hi,

With Power/Camera/Soft reset pressed.
This is what is whown:

In BOOT SCreen:
TITA100 MFG
SPL-2.40.Olipro
CPLD-9

When Soft Reset this is what is shown:
Bootup Wallpaper with: PPCGEEKd and PPCKitchen.org Present.
p. dcaaxam-4350
r. 3.27.00
d. 2.17
Then it's go to another Picture shown as LOADING and that's it.
It's won't go ay further.

Please help!!!

I flashed w/ couples other ROM before and nothing like this. Also, I tried VBluc ROM and it all good, but when using the phone it not working. ROM Is working, but you can't hear anything. Also, when try to use the speaker phone, phone just reset itself.

How can i remove this PPCGeeks and PPCkitchen Bootup screen?

Thank you very much

hmmm, try putting it into bootloader and loading 3.35 Sprint Official ROM
if you arent sprint user, dont let customizations run

*edit* that should update your radio to 3.35 then you can flash custom rOM

elude79 04-25-2008 12:58 AM

Re: PPC XV6800 Will NOT Pass LOADING Screen (a Picture from PPCGeeks ROM)
 
Hi,
Yes, I am not an Sprint User. How can i skip the Customize part.

Thanks

elude79 04-25-2008 01:37 AM

Re: PPC XV6800 Will NOT Pass LOADING Screen (a Picture from PPCGeeks ROM)
 
Hi for everyone help,

I finally get my Xv6800 back. I just reflashed w/ Alltel ROM Radio is 3.35 w/ Alltell ROM, It's work actually better then Verizon ROM. Im still having problem w/ the GPS those. PLease help me... Where i work, i really have to travel and it really hard to travel around cities w/o know the street...etc.....

I am using FREE iGOMyWay6. Work very well w. my External Bluetooth GPS, but i prefer to use the Internal GPS if possible.

THnkas

puff 04-25-2008 04:03 PM

Re: PPC XV6800 Will NOT Pass LOADING Screen (a Picture from PPCGeeks ROM)
 
Quote:

Originally Posted by elude79 (Post 259686)
Hi,
Yes, I am not an Sprint User. How can i skip the Customize part.

Thanks

Just soft reset b4 they run ;-)

Quote:

Originally Posted by elude79 (Post 259730)
Hi for everyone help,

I finally get my Xv6800 back. I just reflashed w/ Alltel ROM Radio is 3.35 w/ Alltell ROM, It's work actually better then Verizon ROM. Im still having problem w/ the GPS those. PLease help me... Where i work, i really have to travel and it really hard to travel around cities w/o know the street...etc.....

I am using FREE iGOMyWay6. Work very well w. my External Bluetooth GPS, but i prefer to use the Internal GPS if possible.

THnkas

maybe try a diff 3.35 ROM? cook a new one in the kitchen lately?

Quote:

Originally Posted by GnatGoSplat (Post 257272)
Ok, I dumped the ROM and compared it to the Sprint 3.35.
  • Alltel ROM lacks Java while Sprint has it.
  • Alltel ROM has MMS cooked in while Sprint does not.
  • Several DLLs are newer in the Alltel ROM. Off the top of my head: InitProv.dll, PicturesExt.dll, CDMA_API.dll, and a few others.
  • Bluetooth driver is newer and a few other drivers.
  • GPS IS NOT ENABLED IN THIS ROM!

I investigated further and learned the reason GPS does not work in this ROM is because the following drivers are MISSING:
  • GpsDaemonService.Dll
  • gpsid_qct.dll
  • qccmquery.dll

Simply adding those 3 drivers enables GPS.

or you could just hunt down those three dll files ;-)


All times are GMT -4. The time now is 07:28 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0