Originally Posted by hd2 (Post 262129)

by the way, I tried to thanks someone else and couldn't.....am I missing something there as well?

Originally Posted by hd2 (Post 262160)

My ESN (decimal) is incorrect after upgrading....I am attempting to correct it but it won't let me edit it....I have the sublock code and it allows me to change other settings but not that one....any help would be appreciated....thank you

Originally Posted by bunvilla (Post 263214)

man i told myself that i would not get involved , but u guys really miss the mark when it comes to the carrier settings/
im not going to go into great lengths to get u going, it probably would just confuse u more. But during this whole thread i never heard u attempt to ( i forgot what its called IOTA i think) but its were u dial *228 to reprogram your phone to the specifications of your carrier. im going to go out on a limb and say that the upgrade shouldnt have changed your esn, and to the best of my knowledge, upgrading to a rom wouldnt do that. it does sound like what "azclown" had said about the radio version. i myself had to find the right way to lock and unlock my phone to be able to upgrade to the different ROMs/

make sure u upgrade and downgrade the (Hard_MFG_SPL) as needed for the roms and radios/

example; for me to try radio 3.37, i had to downgrade my "Hard_MFG_SPL 2.40 " to the 1.20"

then i was able load the new radio, of coarse i wanted to load a fresh copy of DCD 3.04, and forgot to put back the Hard_MFG_SPL 2.40. needless to say i kept getting error messages until i realized i forgot to reload the necessary Hard_MFG_SPL 2.40 version to be able to load the custom rom/ needless to say it is a pain in the butt, but everything worked out/

PS: i also thanked AZclown 4 u, he deserves it.

================================================== ============

i cant believe some of the trouble u guys get into with this rom upgrading/ I have cricket as my carrier ( which they dont carry this phone, and insurance is out of the question, and u better believe that their tech agents r clueless, BUT i have managed to get everything working just fine / and u can 2

Originally Posted by bunvilla (Post 267955)

the roms are for the phone / and the only thing that is different is the carriers customization pkg / and all it does is automatically setup the registry with the server info for the specific carrier/ meaning that u can (if had to ) manually input all the configurations yourself/ forget your carrier and concentrate on loading right radio with rom version and hardSPL

Originally Posted by hd2 (Post 268048)

Thanks for that......so, after many more hours of research and days of my phone not working correctly, I am gathering that I have to flash my phone back to the original Qwest ROM and Radio, then flash to the new Sprint and then flash to dcd's 3.0.1? I do have the ROM's but unable to find the radio if this is the case. I read somewhere (xda?) that if I just flash directly to dcd's 3.0.1 ROM from where I'm at now, I could brick the phone. Is my understanding correct so far?

Originally Posted by hd2 (Post 268947)

Well, I am very happy to say that so far everything is fantastic. I haven't tried all of the bells and whistles yet but the phone rings, I can make and receive calls and I'm showing a data signal but haven't tried to check email or gps etc.

You guys are awesome. I can't thank you enough for all of your help. The next beer is on me....thank you everyone!

Rick

Originally Posted by hd2 (Post 269231)

Sorry guys, I may have jumped the gun a bit.....I think I'll play with it a little before I post again.....don't wanna be crying wolf here and wasting your time.....

Originally Posted by PPC_N00B (Post 269241)

sounds like you flashed a compatible 3.35 OS ROM ;-)



you need to change the EPST settings back to what they were set for quest, or yeah flash a quest ROM and let customizations run to correct the ePST. although i must note that downgrading from GPS ROM (not sure if that's what you flashed or not) to non-GPS is highly not recommended and could possibly brick your phone.

Originally Posted by hd2 (Post 269944)

When I go into view (##778#) everything seems to be correct except my PRL says 60610 and the PRL capacity default is different. Do you have any thoughts on this?

Originally Posted by bunvilla (Post 126204)

here is how u get the code to unlock the phone to set it up with another carrier but i havent found a way yet to delete the stuff in the extrom/ thats a different issue /hope this helps


HOW TO GET YOUR SPC or MLS CODE from a QWEST/SPRINT 6800 MOGUL easily
Found the post at ppcgeeks which worked excellent for me in getting my spc or mls code

Someone want to verify a different way to get MSL?
I was playing about with my Sprint Mogul and found a couple of ways to get your MSL... They basically both get it the same way, just take different routes to get there.

Two different ways to get MSL:

Method A:

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r

* The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows.

Method B:

* Start your favorite pocket-pc terminal program (like pocketPutty - http://www.pocketputty.net/)
* Connect to com9 (Putty used default speed of 9600)
* type in AT+HTC_RMSL=0 and hit enter, your MSL will be displayed.
* Soft reset to restore phone functionality

Let me know if it works for you...

Thanks,

Geoff

--------------------------------------------------------------------------
THE FIRST OPTION WORKED EXCELLENT and i didnt have to install anything or take a chance of messing my phone up.
this rocks thought i would share it/ I CANT TAKE CREDIT FOR IT got it from ppcgeeks

http://forum.ppcgeeks.com/showthrea...9&highlight=spc

Originally Posted by bunvilla (Post 270237)

u change the prl by first getting the correct 1 / u'll find here :

http://www.corolada.com/prl/

then u load it into the "My Documents" on your phone / if u have a SD card, u should also copy it there, if the SD card has a folder called "My Documents" copy it in there also/

once that is done go and dial ##775 or ##775# which ever works, and then select edit , then browse and locate prl/

because its alot of info for me to write, i suggest u look up ALL my post regarding qwest, i show u how to EASILY get your SPC code , because GetSpc doesnt work on qwest 6800's.

Plus i think im the only person who copied the original qwest 2.13 rom ,(which u should find a link to in 1 of my posts) i have the 1.47 radio which can be used instead of the 1.39 which isnt as good as the 1.47 anyways
A friend of mine from work bought a mogul yesterday brand new from qwest/ i took it home and during my lunch i upgraded it to radio 3.37 and DCD 3.04 rom ( of coarse i had to load both spl 1.20 and 2.40 at 1 piont / then load a sprint rom upgrade then to desired DCD 3.04)
i used DCD 's kitchen which allowed me to load the qwest customization package, so good luck ive said all im going to say