PPCGeeks - Bricked It...?

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- Samsung Omnia (http://forum.ppcgeeks.com/forumdisplay.php?f=69)

- - Bricked It...? (http://forum.ppcgeeks.com/showthread.php?t=73252)

I made a few posts in Adrynalyne's 6.1 ROM thread, but I guess it makes more sense to put it here since it doesn't have to do with the ROM (unless I am mistaken... apologies for the stray posts there, I'm a little stressed out at the moment).

I flashed to the CC20 rom a while back just fine, and decided to give this 6.1 ROM a runthrough. Everything seemed to run fine:

Code:

PDA Device Found!

[Port : 1]EBoot version = 01.71

-------------------------------------------------------------------------------------

PDA Device 1 ready to download! 

-------------------------------------------------------------------------------------

PDA Device 1 ready to download! 

-------------------------------------------------------------------------------------

PDA 1 starts downloading...

Don't plug it out until the label becomes blue!!!

-------------------------------------------------------------------------------------

PDA will be written. 

-------------------------------------------------------------------------------------

Downloading PDA region #1(DISKIMAGE)...

=========DownloadImagePDA===============

PDA 1 finished downloading!

Text overlay went to blue like it was supposed to, the phone turned off... and never came back on.

I've tried all the normal reset buttons and nothing is responding at all. At one point I got this message on my computer while it was plugged in:
http://i41.tinypic.com/21jmyrk.png

Reconnected it, now nothing at all.

I just got the phone in mid Feb -- do I have any options at all? :(

Help.

Re: Bricked It...?

Quote:

Originally Posted by liquidsteel30 (Post 1005090)

Code:

PDA Device Found!

[Port : 1]EBoot version = 01.71

-------------------------------------------------------------------------------------

PDA Device 1 ready to download! 

-------------------------------------------------------------------------------------

PDA Device 1 ready to download! 

-------------------------------------------------------------------------------------

PDA 1 starts downloading...

Don't plug it out until the label becomes blue!!!

-------------------------------------------------------------------------------------

PDA will be written. 

-------------------------------------------------------------------------------------

Downloading PDA region #1(DISKIMAGE)...

=========DownloadImagePDA===============

PDA 1 finished downloading!

did you install the samsung usb driver first?

edit: sorry, you must have since you actually completed the flash. You installed the leaked first and then adryns right? Try another flash if so.

Re: Bricked It...?

I was under the impression that the ones that Vista (or Win7, for that matter) were sufficient. The flash to CC20 went fine, and this one appeared fine on the computer end.

:(

Re: Bricked It...?

Quote:

Originally Posted by liquidsteel30 (Post 1005098)

I was under the impression that the ones that Vista (or Win7, for that matter) were sufficient. The flash to CC20 went fine, and this one appeared fine on the computer end.

:(

havent read up much on the drivers in win 7. If one went fine though then you are good in that area. When you where in the samsung loader you used the pda button and then navigated to adryns rom? as oppose to when you did the cc20 you used the unified image button?

Re: Bricked It...?

Yep, used the PDA button. The thing ran, the Done text (or whatever it says) in the top right went to a blue background saying it was done, and the phone turned off.

Re: Bricked It...?

Quote:

Originally Posted by liquidsteel30 (Post 1005110)

Yep, used the PDA button. The thing ran, the Done text (or whatever it says) in the top right went to a blue background saying it was done, and the phone turned off.

yep... im not sure if by using the unified image button if you messed anything up. Maybe you should reflash the cc20 rom (of course using the unified image button like you should) and then install adryns rom only select the pda button.

edit... didnt read your post right. I see you did you the pda button. Well same as above. Try to re-flash the cc20. then the cooked rom.

Re: Bricked It...?

one more thing....
for arguements sake and to be on the safe side... maybe install the sammy usb driver? Again im not too familiar with win7 so im not the best advice here.

Re: Bricked It...?

Quote:

Originally Posted by jason917 (Post 1005121)

Tried -- there is no response at all from the phone, so it can't be flashed.

glarglar

edit: I am running Vista.

Tried installing the Samsung drivers, they went through fine. Reattached the phone to the computer, and it popped up for new hardware -- It didn't find any working drivers, so I pointed it manually to the extracted samsung folder with the .inf files in it. Didn't work, gave me this in a windows error:

Code:

Description:

  Windows detected a new device attached to your computer, but could not find the driver software it needs to make the device usable. Each device manufacturer typically includes driver software of a CD that comes with the device, or as a download from its website. The hardware ID of your device is USB\VID_8086&PID_C001&REV_0000.



Problem signature:

  Problem Event Name:    PnPDriverNotFound

  Architecture:    x64

  Hardware Id:    USB\VID_8086&PID_C001&REV_0000

  OS Version:    6.0.6002.2.2.0.256.1

  Locale ID:    1033

Re: Bricked It...?

Quote:

Originally Posted by liquidsteel30 (Post 1005129)

Tried -- there is no response at all from the phone, so it can't be flashed.

glarglar

so somehow you destroyed the boot image? My understanding is that if you turn the phone on with the top right power button, it will run the boot image first (when the omnia loader detects the device) and then start to load the os (and in your case the very bricked os). Dumb question, just trying to brain storm with you... you pulled the battery and then tried turning it on to attempt a flash?

Re: Bricked It...?

There is absolutely no response from the phone when I hit the power button. No backlight on the LCD, no icons, nothing.