Palm treo pro disassembly and repair
 

Hi I have a treo pro and the touch screen/digitizer has broken and i would like to repair it myself but I havent found any good links with steps online if anyone could help its much appreciated thanks

Re: Palm treo pro disassembly and repair
 

I don't know what a digitizer is, but it sounds like rocket science....Good luck:)

Re: Palm treo pro disassembly and repair
 

havn't taken a Treo Pro apart but if it is anything like the 700wx was, it should be a breeze. I think there were only 6 screws and some plastic snaps. Just work slow and be patient and you should be good.

Re: Palm treo pro disassembly and repair
 

found this

Re: Palm treo pro disassembly and repair
 

As I said in the article, I tried to remove the digitizer but it seemed like it was held down by glue, so i didn't want to risk damaging my device.

Have you tried removing your digitizer? Worst case, you can replace the face plate, but there are digitizers on Ebay, so the digitizer should be removeable.

Re: Palm treo pro disassembly and repair
 

No, I havn't tried removing the digitizer.

Back in my Nextel days I replaced the housing on my i870 and I had to heat the glue with a hair dryer. If you do it, don't get to close or do it too long as you just want to heat it enough to soften the glue...5 seconds tops.

Re: Palm treo pro disassembly and repair
 

Got it fixed was easy thanks to robins guide on mytreo so thanks again to all who posted

Re: Palm treo pro disassembly and repair
 

Glad my guide helped somebody. :)

Re: Palm treo pro disassembly and repair
 

hello. unfotunately your link with guide for digitizer is no more valid. can you please post it again, on valid location? thanks

Re: Palm treo pro disassembly and repair
 

The same article is here