Re: Updating LG Fathom firmware will lock it again?
 

On some VS750's purchased thru Amazon.com USA about a month ago (They appear to be coming from the same company that supplies phones to TigerDirect.com /CompUSA.com , Seller UnlockedCellPhoneKings on Ebay USA site) the phones arrived:

A: With a VodaPhone Verizon GSM SIM CHIP installed in the SIM CHIP SLOT.
B: In a UNLOCKED state- VS750 accepted T-Mobile sim no problem.
C: With firmware V4.

Flashed the phone with V5, later with V7 and it did NOT re-lock the phone. VS750 recognizes the T-Mobile USA SIM CHIP after flashing.

The VS750 I believe was for the US market ONLY.
With the phone being sold thru VERIZON USA I would think more likely than not the phone has hard coded into the EPROM itself that it will:
A: Show you are in roam mode on any other carrier.
B: More than likely NOT allow you to program the phone for any other carrier other than VERIZON. The CDMA part of the phone is more than likley permanently locked to VERIZON.

(On the GSM SIM CHIP SLOT - I would think that slot is GSM ONLY due to the above.)

The GSM SIM SLOT's purpose is to allow the phone to be used as a GSM PHONE in the areas VERIZON doesn't service (EG: via VodaPhone while traveling in Europe.)

So far as the VS750 Fathom's SIM CHIP SLOT as sold originally thru VERIZON only accepting a VodaPhone SIM chip, I think that would have probably have been the as-shipped, originally marketed configuration. As shipped I woud think the VS750 was LOCKED to only take the VodaPhone sim - Verizon and Vodaphone most likely having agreements as such.

The term "UNLOCKED" refers to the SIM LOCK being removed so SIM chips other than VodaPhone will function.

***********************

Firmware notes.
V4
V5= Adds Mobile OFFICE 2010
V7=Adds what appears to be a OEM lite version of SPB SHELL giving you Android type screens.

Problem with V7 is that on incoming (GSM) calls is that when you try to MUTE the ringer via the vol up/down button is the muting function crashes saying:

"No enough memory, close some applications"

Net result is the ringer continues to ring, ring, ring.

Best option is to flash to V5 (unless you have to have some function V7 offers)... and then add SP SHELL v3.5.3. The full version of SPB SHELL unlike the watered down version in V7 of the firmware flash offers a much nicer set of configuration options and choices than the water down version that V7 of the firmware does.


*******************

PS: POST BACK YOUR FINDINGS- In as much detail as possible.
(Post info you'd like to see if you were needing the answer to a problem.. Don't just post back.."Yea I fixed it"... Post back in detail what you had to do to fix a problem..In a step by step format.

Imagine you had a time machine and were just now searching for the answers YOU desire- and someone had posted the info YOU were looking for.. in detail)

Re: Updating LG Fathom firmware will lock it again?
 

See post one post up.

Re: Updating LG Fathom firmware will lock it again?
 

As noted in my previous post SIM SLOT is for GSM SIM CHIP, I doubt it will accept a CDMA sim. .
What you might be able to do is to manually enter your carriers network info into the phones Eprom.
On Youtube there are videos showing you how to access the ENGINEERING SERVICE MENU options on LG phones... via those you "might" be able to edit CDMA carrier info.

As shipped the VS750 IIRC can be configured to function as CDMA only, GSM only(2 versions)... OR what is called Global Mode (Searches for CDMA and GSM).

Note:
1: I don't have a account thru a CDMA carrier- I had my configured as GSM only.
2: In areas I would lose GSM signal the phone would ask if I wanted to switch to"Global Mode". EG Search for CDMA..Verizon...
Based upon that I would think the reverse would be true- Phone prefers a CDMA signal as it is a Verizon phone and Verizon is CDMA -it can switch between CDMA and GSM if set to GLOBAL MODE automatically.

Re: Updating LG Fathom firmware will lock it again?
 

hi i hav purchased LG Fathom vs750 recentely and i'm unable to get it started with my loop simcard plz let me what should i do

Re: Updating LG Fathom firmware will lock it again?
 

Hi,

Did anybody make any progress in this area ? (I mean, is it possible to use it on another cdma network, even with a custom rom) ? I've been asked about this but unfortunately, there is no cdma network in my country, so I can't test.

Re: Updating LG Fathom firmware will lock it again?
 

I've been told that Cricket and MetroPCS will gladly use the phone, but you won't get 3G until you install a provisioning .cab file from either XDA or here, and you won't get MMS unless you remove Arcsoft PowerMobia and install the proper MMS settings files (also available either on xda or here)
Custom ROMs do help the situation, but since most people who use the Fathom also use it as their main phone, I doubt many people have dabbled with removing all carrier branding completely and then adding it in after.
if i had a second one, I would gladly do the testing, as I'd like to find a way to disable the CDMA half completely when on a GSM network (and disable the whole defaulting to Verizon stuff)
I think Sprint also will take the phone if you beg enough, but that's just speculation. I know they've taken other Verizon phones before, so I don't see why not.
No idea about US Cellular, as I don't really know much about them.

Re: Updating LG Fathom firmware will lock it again?
 

Yes. I have activated Reliance CDMA Network (india) & working fine. I am using both GSM & CDMA (one at a time) without any problem.

Re: Updating LG Fathom firmware will lock it again?
 

How to enable for Reliance India network?

Re: Updating LG Fathom firmware will lock it again?
 

Please go through this post for your answer
http://forum.ppcgeeks.com/lg-fathom/...ing-india.html

Re: Updating LG Fathom firmware will lock it again?
 

hi to all i have unlocked lg fathom i tried to update it to version 7 with kp500 utility afert completing 94% it shows error and now my phone is sticked to emergency download ( downloading do not unplug) mode in LGPNST it shows unknown device at com3 how can i cure it also it shows only 1 dll file version2 i think.. what i should do please tell me
thankyou