PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Vogue Development (http://forum.ppcgeeks.com/forumdisplay.php?f=59)
-   -   Lost EvDO after upgrade, FOUND FIX. (http://forum.ppcgeeks.com/showthread.php?t=28458)

OMJ 06-05-2008 08:53 AM

Re: Lost EvDO after upgrade, FOUND FIX.
 
Quote:

Originally Posted by boggsie (Post 305551)
Glad that you got this fixed.

However, I think that it is important to clarify: You cannot be engaged in an active data session while also conducting an active voice call. Rev.A will, in many cases increase data speed and reduce data latency, but it does not enable simultaneous data and voice. What Rev.A does enable, is an interrupt ... so that when a data session is taking place (long download, etc.) and a voice call is incoming, you get a prompt to allow you to choose to interrupt the data session in order to take the voice call.

Best regards,
-boggsie

EDIT: P.S. So what does it mean when your PRL is blank?

you sure about that? Rev A does not give u simultaneous data and voice, nor does it prompt you to interrupt.....I'm running a fairly stock rom att, and just tested this by streaming radio then placing a call from a landline. data stops, EV changes to 1X for the phone call.

boggsie 06-05-2008 09:13 AM

Re: Lost EvDO after upgrade, FOUND FIX.
 
Quote:

Originally Posted by Old_Man_Jenkins (Post 305588)
you sure about that? Rev A does not give u simultaneous data and voice, nor does it prompt you to interrupt.....I'm running a fairly stock rom att, and just tested this by streaming radio then placing a call from a landline. data stops, EV changes to 1X for the phone call.

That's a good test, OMJ.

Apologies if my reply was unclear. We are thinking along the same lines. Rev.A does NOT give you simultaneous data and voice. Agreed.

The confirmation ... I guess that is more of a supposition based on experience and observation.

I have seen/received the prompt a few times ... i.e. in the midst of an active data session and a call comes in ... and I received a prompt.

How interesting ... can't for the life of me get it to come up now.

So, no prompt - immediate incoming call. :p

Thanks, OMJ

yaco 06-05-2008 10:33 AM

Re: Lost EvDO after upgrade, FOUND FIX.
 
Here's a link from another thread that I started and someone else posted it. It breaks down what types of Network will allow you to have both data and voice:

Ihttp://support.wmwifirouter.com/knowledge/KB0802013/

mswlogo 06-05-2008 11:42 AM

Re: Lost EvDO after upgrade, FOUND FIX.
 
Quote:

Originally Posted by boggsie (Post 305551)
Glad that you got this fixed.

However, I think that it is important to clarify: You cannot be engaged in an active data session while also conducting an active voice call. Rev.A will, in many cases increase data speed and reduce data latency, but it does not enable simultaneous data and voice. What Rev.A does enable, is an interrupt ... so that when a data session is taking place (long download, etc.) and a voice call is incoming, you get a prompt to allow you to choose to interrupt the data session in order to take the voice call.

Best regards,
-boggsie

EDIT: P.S. So what does it mean when your PRL is blank?

REV0 will interrupt data as well for an incoming call.

shappy0869 07-13-2008 04:42 PM

Re: Lost EvDO after upgrade, FOUND FIX.
 
Quote:

Originally Posted by yaco (Post 305276)
Help... I have Sprint on my touch and was using roaming to get EvDO on my area. It was all working great until I decided to try to upgrade my radio to 3.37.15 using (RUU_Vogue_4350_PPST_SpeciallNBH_SPRINT_WWE_3.02.6 51.2_Radio_435011_3.37.15_AM_NV_SPCS_1.33_0823_Tes t.exe) from 3.37.10 (used RUU_Vogue_4350_ALLTEL_WWE_3.04.671.2_Radio_4350H_3 .37.10_Alltel_NV2.00_PRL30008_0331_Ship_withSpecia lNBH.exe)

After the upgrade when I set my phone to roaming only it stays on 1X. I've been searching the forum for this but no luck.

Clues anyone?

UPDATE:
I'VE FOUND THE FIX (i feel like a ninja now :)!!! So, apparently PRL 60611 removes EvDO from Roaming... One of the roms i used upgraded the PRL to 60612 and you'd lose EvDO when Roaming. Solution? downgrade your PRL to 60610.

To do that:
1. download the PRL file from http://pdaphonehome.com/forums/attac...0610-60610.zip
2. extract it in your My Documents folder inside your phone memory (not card).
3. dial ##775# and wait till it asks for your MSL to unlock it (ton of threads on how to get your MSL).
4. Highlight UPDATE PRL
5. Menu Edit
6. Browse to the file...
7. Ok, and say Yes to update.
8. Soft-reset and you're set!

EvDO is faster and lets me be online and receive phone calls at the same time so my girlfriend won't get pissed anymore cuz it won't go to voicemail :) plus I get free roaming so I can just enjoy it now.

I did the 2 registry edits and confirmed they stuck. When I select Roam Only and hit ok my phone just sits there, trying to connect to a network. Nothing happens. I did the above updated PRL and still the same result.

Any ideas what I am doing wrong?

Thanks.

savior02 07-14-2008 12:07 PM

Re: Lost EvDO after upgrade, FOUND FIX.
 
does anyone know how to get rev a and calls to work at the same time? im running the new leaked official rom from sprint...maybe a reg edit to keep internet connection on will do it?

johndoe1980 07-22-2008 12:21 AM

Re: Lost EvDO after upgrade, FOUND FIX.
 
Yaco, which network are you roaming on ?? I have good VZW EVDO coverage in my area but even after doing the things you suggested I can't get EVDO roaming.

WRMG3 07-27-2008 06:00 PM

Re: Lost EvDO after upgrade, FOUND FIX.
 
thanks man. i was getting pissed walking around the room trying to get ev in roaming. thanks again.

Whosdaman 07-27-2008 06:18 PM

Re: Lost EvDO after upgrade, FOUND FIX.
 
You do know 60613 is the newest....call *2 and ask for an update on your PRL for 60613

They will hang up and you have to call *2 back and your update will begin, see if that works

sliverr7x 07-27-2008 11:23 PM

Re: Lost EvDO after upgrade, FOUND FIX.
 
I have a little bit of a problem. I got the prl to load and get the EVDO to show up but when when I am in roam and try to use the internet it wont let me connect. But if I switch back to auto and try the internet it works fine. I did the reg edit for the new sprint rom of roaming only and that works fine and did what yaco said to do but I cant connect.


All times are GMT -4. The time now is 05:06 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0