Re: Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)
 

Yes you are unlocked and yes its fine to have the Stock ROM running on an unlocked phone... As to the error I do not know because I have not flashed off the SD.. I always flash just from my computer

Re: Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)
 

thanks but how do you flash a custom rom from your pc ? i thought you had to put the nbh file on a formatted sd card to flash ?

Re: Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)
 

Plug into the computer via activesync or windows mobile device center and then run the RUU(ROM Update Utility).. If the ROM is just an .nbh file then you will need to find the vogue RUU and put the .nbh in the RUU

Re: Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)
 

I've read and re-read the thread and couldnt understand why it wouldnt work on mine...
I have a BELL HTC Touch with 3.09 ROM and Radio 3.42.50 everything at stock. I'm running it on my VISTA Business Edition 32 bit

Now I want to use a custom ROM, so I downloaded the unlocker 2.31.
1. Ran the Vogue_unlocker_MFG_2.31.exe, it extracted to a temp folder and open the DOS window
2. Followed the instruction to make sure It is connected to ActiveSync. I see my device HTC Touch icon in my windows explorer and can access this.
3. Then the unlocker init and load a temporary SPL to ram with JumpSPL
4. My screen on the PPC goes in 3 color screen showing the Soft bootloader, with Im coke 2.00 coke.
5. This is where it goes weird. The command window asks me to disconnect and reconnect.
6. I unplug the USB , hear the disconnection, and plug the USB back and hear the windows reconnection sound BUT I DO NOT SEE THE DEVICE icon in the WIndows explorer! On the PPC, it shows clearly that the connection is USB ( it switched from USB to serial to USB on reconnection)
7. At this point, I proceeded and it started the RUU and I followed the onscreen instruction. It loaded the progress bar at 0% but after a while i get the error 262.
8. Nothing was actually written and i was able to recover and im back to my original 2.00.1 SPL

I've tried several times and same thing happens, even removed my SD card but to no avail... Its as if the USB cannot be detected completely in windows correctly after in my the 3 color screen, although the PPC detected as USB connection and in windows I HEAR the connection sound but no device icon in the windows explorer...


Anyone have a solution for me?


Thanks

Re: Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)
 

Ok turns out I just had to change the USB port and although it didnt show the device icon in window explorer, this is normal.... it went from 0 to 100% correctly... now on to flashing a rom :P

Re: Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)
 

glad you fixed it..

Re: Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)
 

Downloaded the 6.1 ROM and now Im having problems downloading anything. Im getting the
"Vogue_unlocker_MFG_2.31" is not a valid pocket PC application.

Its been awhile since I had to do anything to my Touch but I havent had any problems installing anything until the update. I've looked through the treads to see what Im doing wrong but seem to be going in circles and I know its something Im overlooking since I havent had to adjust my phone to dowload anything in awhile. Suggestions?

Re: Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)
 

yo9u run the unlocker on your computer not the ppc

Re: Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)
 

Like I said, its been awhile. Thanks

Re: Unlockers for Custom Roms on Vogue 2.31(GPS) and 0.40(nonGPS)
 

Whats up guys? I am running the stock sprint wm6.1 rom. So if ive got the 3.42 radio already, am i good to go with just the 2.31 unlocker?