no ##3424, dmrouter.exe or epst on verizon touch pro
 

hi guys, got a verizon touch pro, i am unable to to enter ##778, ##778#, ##3424, ##3424, or any form of those codes with results. when i enter this on my other touch pro, it brings the respective programs up right away without even having to press send, but not on this phone. i tried following advice i saw on here about navigating to the windows directory to find the actual programs dmrouter and epst, and i found NO dmrouter program whatsoever, and epst is a non-executable, and there is also an epst2 non-executable. i need to be able to use qpst on this phone, so i have to get into the diag program at minimum.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

are you on stock rom or a custom rom?

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

stock

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

I'm using the same verizon TP and have not been able to get into these menus regardless of my rom.

I'd like to use them specifically to check signal strength with different radios. I'm subscribed for a solution as well.

Like the OP I've checked the windows folder as well and find exactly the same thing. No dmrouter and epst/epst2 that are non-executable.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

did you try flashing a new rom?

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

no, i was going to leave the rom stock as i may be getting rid of this phone soon, so i don't want to take a negative on resale with custom rom.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

Did you do the tweak to disable the dialer? If you did enable it and you should be good.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

custom dialer is almost always the issue, either that or no carrier cab installed on a custom rom

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

While you are in File Explorer, click on Menu and Show All Files, then you will be able to see EPST, DMRouter, FieldTrial. Have you tried ##778 Send?

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

Thanks, I got it to show up, but unfortunately when i click on dmrouter, it does nothing, and when i click on epst, it flashes onto the title bar, then quickly goes away with no other results. I tried ##778, but it just dials instead of bringing up epst.

i did not tweak this phone in anyway...yet. no dialer disabled.

as i have no custom rom installed, or custom dialer installed, i must assume i have the correct carrier cab installed for a verizon stock rom on a phone they sold me, so i do not believe this to be the issue.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

if your not sure your going to keep the phone then why do you need to get into EPST or use QPST on it so badly?

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

like i said, i may sell it, but i may not. it is irrelevent if i sell it this week or next year :)

besides, aside from the length of time i own it, it's one of those puzzles that just makes me go nuts since it shouldn't be this way.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

im assuming you know that screwing around with QPST or EPST can screw your phone up to the point that is wont work.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

i have used both before, but that still doesn't help me access either at this point.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

there is a .cab floating around on here that will enable the ** codes to work. cant remember the thread though.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

understand, but if i am physically finding the files (dmrouter, epst) in the windows directory, which i am now able to do, and when opening them nothing happens, the ##778 and ##DIAG will just direct me to a non-opening file, correct? my issue is getting those files to run, and i seem to remember someone else on some other thread or forum altogether had this issue, but i can't remember where or what the solution was.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

IDK, i know the .cab has something to do with the dialer. i'll see if i have it and will give it a try.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

I had the same problem with one of the early Mighty ROM's. DMDIAG & EPST etc where in the Windows directory, but clicking on them did absolutely nothing & dialing the codes didn't work either.

I never did find a solution & I tried EVERYTHING. I finally went on to a different ROM (I'm running Merdin 6.5 at this point) & haven't had the problem since.

~John

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

just checked. ran the .cab, dialled ##778 and it went right into epst. this is on a VZN touch pro.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

just tried ##3424 and that works as well.

forgot to add, im using SSK's 6.1 51109 build.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

So how does this help the guy using a stock VZ ROM??

~John

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

damn if i know. i will assume that it would work on that as well. if i had the stock vzn rom i would try it but its late in the day and im lazy. worst thing is he could try it and it not work. whats there to lose?

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

if you want, post me a link to the file or what cab exactly to google and i'll try it; can't hurt i suppose.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

this has to be in your registry for the ## codes to work. do you have them in yours? I just copied and pasted that from dcd carrier cab, but i don't recommend you install it, because it does a lot more then just putting this in your registry.
HKLM\Services\PhoneExt\KeyProgram
<parm name="DisableOTKSL" value="1" datatype="integer" />
<parm name="DisableMSL" value="1" datatype="integer" />
<parm name="Key9" value="#38278" datatype="string" />
<parm name="Prog9" value="Fuart.exe Fuart" datatype="string" />
<parm name="Key8" value="#34245" datatype="string" />
<parm name="Prog8" value="DMRouter.exe /LOOPBACK" datatype="string" />
<parm name="Key7" value="#7738" datatype="string" />
<parm name="Prog7" value="EPSTLab.exe ##7738" datatype="string" />
<parm name="Key6" value="#3424" datatype="string" />
<parm name="Prog6" value="DMRouter.exe /OPEN_MODEM_PORT" datatype="string" />
<parm name="Key5" value="#33284" datatype="string" />
<parm name="Prog5" value="FieldTrial.exe" datatype="string" />
<parm name="Key4" value="4357" datatype="string" />
<parm name="Prog4" value="EPST.exe #4357" datatype="string" />
<parm name="Key3" value="#775" datatype="string" />
<parm name="Prog3" value="EPST.exe ##775" datatype="string" />
<parm name="Key2" value="#374" datatype="string" />
<parm name="Prog2" value="EPST.exe ##374" datatype="string" />
<parm name="Key1" value="#7764726" datatype="string" />
<parm name="Prog1" value="EPST.exe ##7764726" datatype="string" />
<parm name="Key0" value="#778" datatype="string" />
<parm name="Prog0" value="EPST.exe ##778" datatype="string" />
<parm name="Prefix" value="#" datatype="string" />

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

here it is, I think it will upload. i dont remember who made it but it wasnt me. just so you know.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

i will check for those values; i am guessing they are not there. i'll let you know if it fixes anything.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

This cab did not do anything; when punching in any ## codes, in ANY variation (##778#, ##778, ##778 send, ##778# send), it does nothing; thanks for the try.

When i entered this information, upon entering ##778, it brought up EPST, which, like when I executed it from the Windows directory directly, just flashed up and then flashed away. Same goes when i do ##775 for updating PRL or any other. For some reason it's not executing EPST. Well, it is, it just isn't correctly running. Thanks anyway though!

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

Seeing if anyone had anymore solutions; it seems to me that this must be a type of verizon lock-out or something; yet i have another touch pro sitting right here, and i am able to use all these features seamlessly; shortcuts work great and executing from windows directory does great as well.

Re: no ##3424, dmrouter.exe or epst on verizon touch pro
 

bringing an old thread up from the dead, but this .cab brought back the ## capabilities of the leo dialer i'm using.

thanks for posting it up :thumbright: