How to enter BootLoader screen - Touch Pro
 

I had this issue when loading a ROM and it wouldn't boot -- got stuck at the brand screen (for me it was Verizon w/ radio version and such). I found the TP service manual and it showed how to easily load another rom via the boot loader screen with a sd card.

I couldn't find it easily here on this site so I wanted to post how it was done so any other people that had this issue could find it.

First get a known working ROM and rename the .nbh file to RAPHIMG.nbh. Then format a sd card (micro) in FAT32 <-- this is important, it will not read any other format. Copy the image file to it. Install it in your phone then hold the volume down button and power button until you get to a light grey (not the muti-color screen) screen. Press the power button again to start the install of the ROM on the card. When it says completed hit the reset button (on button of phone) and your done.

If you get the muti-color screen then you did not format the card correctly or rename the img file correctly.

Screen shots attached.

Re: How to enter BootLoader screen - Touch Pro
 

This info is found very easily in the "How To Flash" sticky.
http://forum.ppcgeeks.com/showthread.php?t=43266

Still, good info and nice pics.
Thanks

Re: How to enter BootLoader screen - Touch Pro
 

Then format a sd card (micro) in FAT32

Re: How to enter BootLoader screen - Touch Pro
 

Yes I see that now. Sorry for the duplicate info --- for some reason when I was searching here and at xda I could not find those posts; all I could find was stuff for mtty and the like. weird.