PPCGeeks
Page 3 of 5 12 3 45
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro (http://forum.ppcgeeks.com/forumdisplay.php?f=63)
-   -   how do I establish activesync connection in bootloader mode (http://forum.ppcgeeks.com/showthread.php?t=67806)

lwrdrchvy2 05-07-2009 05:14 PM
Re: how do I establish activesync connection in bootloader mode
 
Quote:
Originally Posted by bennysangel (Post 901778)
Okay took memory card out and I still get the same results. This sucks! I so appreciate you helping me.
The only other thing I can think of doing would be take the battery out for a few minutes then put it back in. Hopefully someone else will look into the thread, read our posts, then post a response that could be useful.

bennysangel 05-07-2009 05:14 PM
Re: how do I establish activesync connection in bootloader mode
 
Quote:
Originally Posted by YouMayLose (Post 901774)
get a thumb/flash drive what ever its called and put your sd card in it hook to read the card from your comp... make sure the .nbh is in the root of the card.. if it is make sure your card is a micro sdhc card..as with just an sd it wouldnt let me flash from the card... and then try hard reseting and see if it reads it... (I suggest the thumbdrive or what ever its called as its cheaper than buying a new phone lol) it doesnt sound like your phone is ruined it just sounds like yourdoing some thing wrong some where.
I have a flash drive at home and I do only have 1nbh file and it is on my storage root. I think I only have a sd card not sdhc

bennysangel 05-07-2009 05:16 PM
Re: how do I establish activesync connection in bootloader mode
 
If I take it in the Sprint store what will they say? I don't even think the phone is charging anymore either I already have problems with that.

lwrdrchvy2 05-07-2009 05:16 PM
Re: how do I establish activesync connection in bootloader mode
 
Your card is a sdhc. If you have the stock rom on it still, you can try taking it in to get it replaced. It will depend on how observant the techs are if they notice that the phone is unlocked.

bennysangel 05-07-2009 05:18 PM
Re: how do I establish activesync connection in bootloader mode
 
Quote:
Originally Posted by lwrdrchvy2 (Post 901802)
you have an sdhc..dont worry

ok. This thing is so stuck and I know I followed all of the unlocking steps it never prompted for flashing.

bennysangel 05-07-2009 05:19 PM
Re: how do I establish activesync connection in bootloader mode
 
Quote:
Originally Posted by lwrdrchvy2 (Post 901802)
Your card is a sdhc. If you have the stock rom on it still, you can try taking it in to get it replaced. It will depend on how observant the techs are if they notice that the phone is unlocked.
Even with it being in Security Unlocked screen. And yes I still have stock rom.

lwrdrchvy2 05-07-2009 05:31 PM
Re: how do I establish activesync connection in bootloader mode
 
The Security Unlocked is always there on the bootloader, it didnt change when you unlocked, just the CMONEX line.

bennysangel 05-07-2009 05:34 PM
Re: how do I establish activesync connection in bootloader mode
 
Quote:
Originally Posted by lwrdrchvy2 (Post 901834)
The Security Unlocked is always there on the bootloader, it didnt change when you unlocked, just the CMONEX line.
Okay well Im going to the Sprint store and I still am going to try this again, not afraid.

lwrdrchvy2 05-07-2009 05:36 PM
Re: how do I establish activesync connection in bootloader mode
 
Thats the spirit! I would do a few searches for stuck in bootloader before you go though just in case there is a solution out there.

bennysangel 05-07-2009 05:37 PM
Re: how do I establish activesync connection in bootloader mode
 
Quote:
Originally Posted by lwrdrchvy2 (Post 901794)
The only other thing I can think of doing would be take the battery out for a few minutes then put it back in. Hopefully someone else will look into the thread, read our posts, then post a response that could be useful.

I did that before I did a hard reset no luck with that either.


All times are GMT -4. The time now is 11:53 PM.
Page 3 of 5 12 3 45
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0