Originally Posted by AFAngryWarrior (Post 592066)

I did the QPST aGPS fix, and now I no longer need to use HTC GPS TOOL, it gets the fixes automatically so I like that fact. Also, for those of you who like me couldn't download QPST from the first post I put it on my FTP server.

ftp://ftp.gibeaultfamily.com/docs/QPST%20Files.rar

Originally Posted by dimitri (Post 592053)

For all those that are looking for th QPST 2.7 build 301, here it is.

http://rs6.rapidshare.com/files/1346...ST-2.7.301.exe

Originally Posted by SolShade (Post 592209)

Trying to get QPST to work and every time i dial ##3424 or ##3424# on my phone it just calls out and tells em the number doesn't exist

Originally Posted by lllboredlll (Post 590123)

UPDATED 12/21/08 12:00 PM

Please read completely. I really don't want to have posts asking about things stated in this post.


First and foremost.... This fix is to be considered beta at the present time. I WILL NOT be held responsible for any damage to your device or any charges from you carrier if you happen to be in roaming because of this.

I have successfully unlocked VZW's TP GPS. Please realise I'm still testing and tweaking the PRI to get the last little bugs out.


Here we go :grin:

1. download lllboredlll VZW GPS Fix.cab and put on your storage card
2. install cab but don't soft reset after
3. use gsfinder or total commander to navigate to \windows\ppst.exe
4. execute ppst.exe and go thru the prompts
5. reset your device as needed
6. make sure you location is turned on and enjoy

AT THIS PRESENT TIME I'D SUGGEST NOT DIALING *228 AFTER THIS FIX IS APPLIED. IT WILL UPDATE THE MODIFIED PRL AND SHOW THAT YOU ARE ROAMING.
IF YOU DO YOU CAN SIMPLY REAPPLY THE FIX TO RESOLVE THE ISSUE.


All navigation software might not work so you may need to open the port with HTC GPS tool that I attached. Settings are Q7500 chip 4800 buad and cold start. I don't have AGPS configured because this thing locks in 2 seconds. There is no need for a data connection to assist when the results are that dang fast.





If you need to go back to the OEM PRI I have attached it aswell. Just go thru the same steps as far as installing and then ppst.exe



If you take my research and improve on it all I ask is that you atleast give me credit for the discovery. I've spent a ton of hours working with NV files and PRI's.

Hope everyone enjoys..... :D


A special thanks goes out to GC14 for his roaming fix. Thank you very much.









UPDATED FOR BANNER FIX 12/20/08 11:30 PM

This will instruct you on how to fix the banner back to Verizon or anything of your liking.

1. Download QPST Pack linked below.
2. Unzip to it's own folder.
3. Install WModemDriver
4. Install QPST
5. Plug your VZW TP to your pc and get activesync connected
6. Depending on your ROM dail ##3424# or ##3424 to execute DMRouter
7. Open QPST Configuration from Start/Program Files/QPST/QPST Configuration
8. If it don't show your device on Active Phones tab then goto Ports tab and add SURF7500A to Com4
9. Click Start Client at top of window, then Service Programming
10. Click OK on Phone Selection Dialog once SURF7500A is selected
11. Click Read from Phone at bottom of window.
12. Click on Display tab and enter name of your choice to the banner box. Stay away from AMPS tab or you will have to close out and start over again
13. You can also do GC's AGPS Fix on the gpsOne tab. Just navigate to the gpsOne tab. Click on the grayed out boxes to the left and the reselect them all. Enter this info into corresponding boxes

PDE IP Address: 66.174.95.132
PDE Port Number: 8888
PDE Transport: IP
Position Calculation: PDE

http://wiki.xda-developers.com/index...VerizonAGPSFix
For further information if needed.

14. Click Write to Phone and then soft reset.
15. Download and install Verizon AGPS Provisioning cab that is attached and soft reset.

DO NOT mess with anything else in Service Programming or you could very well regret it....


Enjoy


QPST DOWNLOAD HERE (will update link to ftp tomorrow)
http://rapidshare.com/files/17536057...d_301.zip.html










Project Update: Phase II should be done within the next day or two. I'm not going to elaborate on what it will be at this time but I'm gonna put a cool spin on things for us VZW users.