|
|
|
||||
|
Re: Touch Pro Video Cable - Build Your Own
Awesome thread... but definitely NOT for the faint at heart.
Removing pin 4 is not easy... Once that is accomplished, everything else is a breeze. Only issue is that hopefully someone will come up with a TWEAK that allows Sprint TV to be used with the video-out cable. |
|
||||
|
Re: Touch Pro Video Cable - Build Your Own
I did the method #1 http://forum.xda-developers.com/show...5&postcount=19 where you dremel the connection.
My TP recognizes it but the video that comes out is all messed up like an old school PPV channel. |
|
||||
|
Re: Touch Pro Video Cable - Build Your Own
I thought i would solder this, but looked at how small the wires were and noticed it was working very well just twisted for the test. Needless to say electrical tape works fine if you're lazy. Thanks for the write up Pzzt!
__________________
Note: 3 Color screen is stuck in bootloader NOT "bricked"; just flash a stock rom exe
Touch Custom rom unlocker Undoing advances in Mogul's since 2007. Titan ReLocker, WM5 roms (don't use w/ gps radio): Telus, TNZ |
|
||||
|
Re: Touch Pro Video Cable - Build Your Own
really - use the audio adapter that came with the pro.. crack it open and either cut or desolder the blue wire.. and then just use a little super glue on the adapter to close it back up.
WAY easier and cleaner and really fast... then just plug a set of av cables with a 3.5mm jack in and presto.. its all good. no where locally had the cables that I could find/use cheap - so Im having a set sent in from Hong Kong.. $5 shipped. |
| This post has been thanked 1 times. |
|
||||
|
Re: Touch Pro Video Cable - Build Your Own
^^^ +1 for this, i just popped mine open and snipped the blue wire and badda boom badda bing it works with my gf's ipod a/v cord.
__________________
|
|
||||
|
Quote:
Crack open, snip tiny blue wire, and enjoy. Didnt have an av to 3.5mm, surprizingly the Dollar store had some though, but they werent a dollar!!! $2.99. but chea, picture quality is a 8 1/4 outta 10, mos def worth 3 bucks. had to turn the 3.5mm jack a few times before the video out screen came up, so jus make sure its tight. Ill probably invest inna better a/v to jack cable later to see if that makes the quality a lil better. Good lookin out brah.
__________________
DONT WATCH ME, WATCH T.V.
|
|
||||
|
Re: Touch Pro Video Cable - Build Your Own
Quote:
Cutting pin4 on the included adapter did the trick - and it works *really* well - pictures below. The cover snaps right back on (it's off in the picture..) - the 1/8" --> 1/8" cable comes w/ the myvu. (slingbox on myvu video glasses = purrrrfect -mark Last edited by diomark; 12-05-2008 at 08:13 PM. |
|
||||
|
Re: Touch Pro Video Cable - Build Your Own
RCA Audio video cable ----- $0.99
HTC Audio 2.5mm/USB Splitter Cable ----- FREE PPCGeeks ----- Priceless Thnx, worked perfectly. Just hooked it up to my Hondas Navi. |
|
||||
|
Re: Touch Pro Video Cable - Build Your Own
Quote:
|
![]() |
|
|
|