Re: Netripper overclock working on touch pro 1
 

What speeds are you guys setting your overclock at? Both Screen on and off would be appreciated, thanks.

Re: Netripper overclock working on touch pro 1
 

Been running it for about a week on NRG 21679.56.3.9 (Sep 27) and battery life showed no/negligable change.
Combined with the update in the ROM, phone is running the fastest and smoothest it ever has.
CPU = 672 MHZ
AC = 604 MHZ

I was getting stalls and freezups at 710 so dropped it down and haven't looked back since.

Thanks again!

Re: Netripper overclock working on touch pro 1
 

Running it on verizon tp running ssk 6.1 kitchen and it was nice and snappy before know its really fast. thanks :cheers:

Re: Netripper overclock working on touch pro 1
 

I just left the cab alone, and I have mine running at 710.4 on energy rom (august something build).

Re: Netripper overclock working on touch pro 1
 

Ditto. Dinik Glass rom by NRGz. No issues at all. Lovin' it!

Re: Netripper overclock working on touch pro 1
 

Hey all - I've been working on OC'ing my TP now for about a week....I am able push it up to 672 stable, but the second I unplug the phone from the charger, it will hard freeze/lock (SOD?) and I need to reset it without the card. I'll put the card in after it boots, and reset the mghz down to 604 then it works fine. Just curious if anyone may have some suggestions for me!!!

--I am running Energy Sep 27 build 21916

Re: Netripper overclock working on touch pro 1
 

Did you follow the instructions in the first post? Or are you trying a different method?
The check time registry value of 20 is important, well really all the steps are important.

The freeze that you speak of happens generally only when just Msm7kCpuSpeed is installed by itself, it is important to install SetCpuSpeed v1.0d to the sd card and do the reg edits.

btw installing Msm7kCpuSpeed to device is what I do

Re: Netripper overclock working on touch pro 1
 

What about the screen off level? Wouldn't you get better battery life if it was lower than stock?

Re: Netripper overclock working on touch pro 1
 

I'm very happy with this.

Can anyone explain why / how this OC mod greatly extends the battery life?

Just wondering.

Re: Netripper overclock working on touch pro 1
 

My hypothesis is above your post.

Right now I'm running at 710/604 and my battery life is greatly reduced. I ran it at 634/400 and my battery life was longer but it was buggy. I'm thinking that my phone has issues underclocking and then overclocking on wakeup.

Re: Netripper overclock working on touch pro 1
 

Just curious, why use
ScreenOffPerfomanceLevel = 20
which I think means 20*19.2 = 384.
Is that what the phone does by default without any mod/hack? If not, wouldn't 528 be more stable/safer?

Re: Netripper overclock working on touch pro 1
 

That performance level is roughly 382-384
I am not sure about default but it is stable for me, by all means try something different if yoou are having problems and let us all know how it works for you.

Re: Netripper overclock working on touch pro 1
 

I get occasional lockups using your settings, certainly could be any number of apps or items causing it, though. Not a big enough deal to do anything about, kinda forces me to reboot every once in a while as I should be doing anyway. I was more curious than anything. What is the default multiplier, anyway? 27, 28?

Re: Netripper overclock working on touch pro 1
 

Will this work for the GSM Tilt2?

Re: Netripper overclock working on touch pro 1
 

Well, my phone finally got bad enough to where it wouldn't even boot, even a hard reset failed to boot. No proof it was the OC that did it, but never had this happen before. I think I'll just run stock speeds from now on. Perfect timing, though, to flash a new NRG rom.

Re: Netripper overclock working on touch pro 1
 

I just installed the cabs from post #2 to my TP2, works great! thanks!

Re: Netripper overclock working on touch pro 1
 

samesies. 710.4 and seemingly working fine.

hope my alarm goes off tomorrow morning!

Re: Netripper overclock working on touch pro 1
 

I have experimented with a whole lotsa settings. My phone CRASHES ALL THE TIME. From ALL the efforts i have tried, i have made a conclusion.

A pretty solid one indeed.
DO NOT REDUCE the performance level.
INCREASE the ScreenOffPerfomanceLevel.

Mine now running 710mhz seamlessly with screenoff settings at 28! Tried for 3 days. Smooth. Sweet.

Re: Netripper overclock working on touch pro 1
 

Before OC
========
I used these settings in advance config:
file sys cache 8mb
file sys filter cache 16384
glyph cache 32kb

Combine WITH OC and 8mb cache (Benchmark)
===================================
Integer = 440.3
Floating point = 10.124
RAM access = 766
Draw bitmaps = 903
Main Storage (Write x Read) = 1936 x 4413
Storage Card (Write x Read) = 3545 x 6872