PPCGeeks - Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- HTC Touch Pro (http://forum.ppcgeeks.com/forumdisplay.php?f=63)

- - Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS! (http://forum.ppcgeeks.com/showthread.php?t=104276)

Re: Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

You made sure the filenames for everything are correct, right? Your directory should look like this:

\AndroidApps
\conf
\media
-haret.exe
-initrd.gz
-rootfs.img
-system.ext | system.sqsh (one or the other, depending on your build)
-zImage
-modulesXXXXXXXXXXX (x's are whatever the filename is, don't change it's name)
-startup.txt

Re: Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

Quote:

Originally Posted by komgol (Post 1947415)

I'm not running any custom ROM.

I just put the acpuclock line back in and HaRET did not freeze up (progress bar went all the way through), but it froze up immediately afterwards. (I just see the normal file explorer window from before. Only now there is a start menu that looks exactly like the top bar on the bottom of the screen. It says "HaRET Version" instead of "File Explorer". The phone is completely unresponsive to anything other than a reset in this state.

This is guaranteed to be an issue with your startup.txt. Please post it.

Re: Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

I got mine working all the way up to the kernel but it gets stuck it just keeps repeating and repeating and repeating!!! this...
00000.......
cant acess tty job control turned off
request suspend_state: wakeup
then it keeps repeating the above line

Re: Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

Quote:

Originally Posted by rogelioc (Post 1947963)

Format your card and try a fresh build - don't reuse anything.

Re: Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

I finally got it working not quite sure what it was. The one thing about it though is the wi-fi doesn't work neither the actual internet service. But it's SO COOL Thank all of you guys who made it possible!

Re: Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

Quote:

Originally Posted by rogelioc (Post 1949376)

So wifi issue... are you using WEP? Also, what do you mean "actual internet service" - do you mean from the cell radio? That should work as well... are you using a RAPH? What is it, 100 500 800?

There was a trick where you had to manually add an APN, but I thought those times were gone. I guess it also depends on your phone provider - for example Sprint is basically little to no configuration, while Cricket, MetroPCS - any of those providers that use a proxy to connect, it's a PITA.

Re: Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

Here's my directory structure:
/andboot
-/AndroidApps
-/CONF
-/MEDIA
-/STARTUP CONFIGS
-HARET
-INITRD
-modules-2.6.2...
-ROOTFS
-STARTUP
-system
-zImage

Here's my startup.txt:
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2040
set kernel zImage
set initrd initrd.gz
set cmdline "lcd.density=210 msmvkeyb_toggle=off board-htcraphael-navi.wake=0 gsensor_axis=2,-1,3"
boot

also, I'm now using MightyROM6 (last week I had no ROM, but now I do, same issue).

Re: Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

Just a quick newbie question. Does the sd card have to be formatted and if it does can I add other stuff back on the sd card like pictures and videos after I do this?

Re: Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

SPORTSMAN70003: Sometimes the sd card has to be formatted. But it's a regular fat32 format, and can still be used both within winmo and android, and can hold all your old files (though you might have to back them up, reformat, and replace them). However, occasionally a weirdly named file on the sd card will cause problems booting or scanning the card, and something in android won't work. So the answer is a qualified yes.

komgol: I'm still pretty baffled here. Everything looks right. Try this: Put a file called 'earlyharetlog.txt' in the andboot folder alongside haret. run it. it should create a 'haretlog.txt' file. See where it's hanging up and report back. You can paste that file here if you want... though I'm not sure it'll have anything interesting to say. I hope it does.

Re: Linux/Android on CDMA Touch Pro -- Now working on Verizon! And with GPS!

===== HaRET pre-0.5.3-20091217_191025 =====
Setting KMode to true.
Old KMode was 1
Finished initializing output
Loading dynamically bound functions
Function 'AllocPhysMem' in library 'coredll' at 0x3f6d364
Function 'FreePhysMem' in library 'coredll' at 0x3f6d3d0
Function '?GXOpenDisplay@@YAHPAUHWND__@@K@Z' in library 'gx' at 0x2adca38
Function '?GXCloseDisplay@@YAHXZ' in library 'gx' at 0x2adce78
Function '?GXBeginDraw@@YAPAXXZ' in library 'gx' at 0x2adc2f4
Function '?GXEndDraw@@YAHXZ' in library 'gx' at 0x2adc3b8
Function 'LoadLibraryExW' in library 'coredll' at 0x3f6d50c
Function 'NLedSetDevice' in library 'coredll' at 0x3f94b2c
Function 'GetSystemPowerStatusEx2' in library 'coredll' at 0x3f73e90
Function 'SleepTillTick' in library 'coredll' at 0x3f6d42c
Function 'CreateToolhelp32Snapshot' in library 'toolhelp' at 0x32bf05c
Function 'CloseToolhelp32Snapshot' in library 'toolhelp' at 0x32bf07c
Function 'Process32First' in library 'toolhelp' at 0x32bf148
Function 'Process32Next' in library 'toolhelp' at 0x32bf1b4
Function 'Module32First' in library 'toolhelp' at 0x32bf348
Function 'Module32Next' in library 'toolhelp' at 0x32bf3b8
Function 'Heap32ListFirst' in library 'toolhelp' at 0x32bf454
Function 'Heap32ListNext' in library 'toolhelp' at 0x32bf4dc
Function 'Heap32First' in library 'toolhelp' at 0x32bf574
Function 'Heap32Next' in library 'toolhelp' at 0x32bf628
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Unable to load library 'ace_ddi'
Detecting current machine
Trying to detect machine (Plat='PocketPC' OEM='RAPH800')
Wince reports processor: core=MSM7500A-528MHz name= cat= vend=QUALCOMM
Looking at machine Alpine
Looking at machine Apache
Looking at machine AximX50
Looking at machine AximX5
Looking at machine Beetles
Looking at machine Blueangel
Looking at machine Himalaya
Looking at machine Magician
Looking at machine Universal
Looking at machine H1910
Looking at machine H1940
Looking at machine RX1950
Looking at machine H2200
Looking at machine H3600b
Looking at machine H3700
Looking at machine H3800
Looking at machine H3900
Looking at machine H4000
Looking at machine H4300
Looking at machine H5000
Looking at machine H6340
Looking at machine HX2000
Looking at machine HX4700
Looking at machine Sable
Looking at machine Wizard
Looking at machine Hermes
Looking at machine Trinity
Looking at machine Athena
Looking at machine G500
Looking at machine Artemis
Looking at machine Herald
Looking at machine Prophet
Looking at machine RX3000
Looking at machine Treo700wx
Looking at machine e310
Looking at machine e740
Looking at machine Acer_n30
Looking at machine Mio_P550
Looking at machine Kaiser
Looking at machine Loox5xx
Looking at machine Loox400
Looking at machine MioA701
Looking at machine Wallaby
Looking at machine Raphael
Detecting ram size
WinCE reports memory size 117440512 (phys=108220416 store=360931328)
Mapping mmu table
Build L1 reverse map
Found 377 uncached and 287 cached L1 mappings (ignored 107).
Not registering command IGPIO
Not registering command WG|PIO
Not registering command GPLR
Not registering command GPDR
Not registering command GAFR
Not registering command GPIO
Not registering command GPIOST
Registering command LOADLIBRARYEX
Registering command NLEDSET
Not registering command TRACE
Not registering command TRACEMASK
Not registering command TRACE2
Not registering command TRACETYPE
Not registering command TRACE2TYPE
Not registering command TRACEFORWATCH
Not registering command INSN
Not registering command INSNREENABLE
Not registering command INSNREG1
Not registering command INSNREG2
Not registering command INSN2
Not registering command INSN2REENABLE
Not registering command INSN2REG1
Not registering command INSN2REG2
Registering command KILL
Registering command PS
Registering command LSMOD
Registering command ADDR2MOD
Not registering command AC97
Not registering command ATIDBG
Not registering command EIM
Not registering command GPIO
Initializing for machine 'Raphael'
HaRET(1)# set ramaddr 0x10000000
HaRET(2)# addlist irqs p2v(0xc0000080) 0x100 32 0
HaRET(3)# addlist irqs p2v(0xc0000084) 0 32 0
HaRET(1)# addlist gpios p2v(0xa9200800)
HaRET(2)# addlist gpios p2v(0xa9300c00)
HaRET(3)# addlist gpios p2v(0xa9200804)
HaRET(4)# addlist gpios p2v(0xa9200808)
HaRET(5)# addlist gpios p2v(0xa920080c)
HaRET(6)# addlist gpios p2v(0xa9200834)
HaRET(7)# addlist gpios p2v(0xa9300c20)
HaRET(8)# addlist gpios p2v(0xa9200838)
HaRET(9)# addlist gpios p2v(0xa920083c)
HaRET(10)# addlist gpios p2v(0xa9200840)
HaRET(11)# addlist gpios p2v(0xa9200810)
HaRET(12)# addlist gpios p2v(0xa9300c08)
HaRET(13)# addlist gpios p2v(0xa9200814)
HaRET(14)# addlist gpios p2v(0xa9200818)
HaRET(15)# addlist gpios p2v(0xa920081c)
HaRET(1)# set ramsize 0x6400000
HaRET(2)# set ramaddr 0x20000000
Welcome, this is HaRET pre-0.5.3-20091217_191025 running on WindowsCE v5.2
Minimal virtual address: 0x10000, maximal virtual address: 0x7fffffff
Detected machine Raphael/MSM7xxxA (Plat='PocketPC' OEM='RAPH800')
CPU is ARM ARM arch 6 stepping 2 running in system mode
Enter 'HELP' for a short command summary.

Running WSAStartup
Starting gui
In initdialog
Found machine Raphael
executing startup.txt
HaRET(1)# set ramsize 0x10000000
HaRET(2)# set ramaddr 0x10000000
HaRET(3)# set mtype 2040
HaRET(4)# set kernel zImage
HaRET(5)# set initrd initrd.gz
HaRET(6)# set cmdline "lcd.density=210 msmvkeyb_toggle=off board-htcraphael-navi.wake=0 gsensor_axis=2,-1,3"
HaRET(7)# boot
boot KERNEL=zImage INITRD=initrd.gz
Opening file zImage
Opening file initrd.gz
boot params: RAMADDR=10000000 RAMSIZE=10000000 MTYPE=2040 CMDLINE='lcd.density=210 msmvkeyb_toggle=off board-htcraphael-navi.wake=0 gsensor_axis=2,-1,3'
Boot FB feedback: 1
Built virtual to physical page mapping
Allocated 836 pages (tags=0x5a200000/11686000 kernel=0x5a201000/11f1e000 initrd=0x5a370000/13a8f000 index=0x5a540000/119a2000)
Built kernel tags area
Built page index
Video buffer at 0x5166a000 sx=480 sy=640 mx=120 my=106
Video Phys FB=1686a000 Fonts=119ab068
preload=2292@0x5a543000/13777000 sj=0x5a543000 stack=0x5a541000/119ac000 data=0x5a542000/119ab000 exec=13777128
Reading 1501876 bytes...
Read complete
Reading 1899956 bytes...
Read complete
Launching to physical address 13777010
Trampoline setup (tram=136@0x2c448/2202c448/1136d448)
MMU setup: mmu=0xa03e0000/103e0000
Go Go Go...