PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro 2 (http://forum.ppcgeeks.com/forumdisplay.php?f=97)
-   -   Trouble Getting MSL with GETSPC... (http://forum.ppcgeeks.com/showthread.php?t=82756)

popdog54 09-05-2009 02:29 PM
Trouble Getting MSL with GETSPC...
 
I'm trying to make a few tweaks to my TP2. The MSL I get from GETSPC won't unlock the EPST menu. Using the HEX ESN I tried using both upper and lower case letters to get the code but neither of them work. Anyone else having trouble?

EDIT: I forgot, I wrote down the MSL when I activated my phone. It's the secondary 6 digit code. It looks Like GETSPC isn't working with Sprint's TP2.

stevedusa 09-05-2009 02:32 PM
Re: Trouble Getting MSL with GETSPC...
 
Quote:
Originally Posted by popdog54 (Post 1142484)
I'm trying to make a few tweaks to my TP2. The MSL I get from GETSPC won't unlock the EPST menu. Using the HEX ESN I tried using both upper and lower case letters to get the code but neither of them work. Anyone else having trouble?
How do you even call up the EPST menu? I forgot the sequences of the * and #.

I think there is another way that you can find out by editing couple registry entries and wait like, 15 minutes. Let me do some search on that one.

8notime 09-05-2009 02:34 PM
Re: Trouble Getting MSL with GETSPC...
 
I always use this procedure:

Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1

* Wait a about 10 minutes (more time will not hurt), and soft-reset.

* Check to see that the file \Atlog\ATDbg0.txt has been created.

* Return the values back to what they were (most likely 0) waiting the same amount of time as above.

* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~


The numbers next to the Rx: +HTC_RMSL line should be your MSL

I've used this one too and have had good luck: http://forum.ppcgeeks.com/showthread.php?t=43560

8notime 09-05-2009 02:35 PM
Re: Trouble Getting MSL with GETSPC...
 
Quote:
Originally Posted by stevedusa (Post 1142490)
how do you even call up the epst menu? I forgot the sequences of the * and #.
##778#

stevedusa 09-05-2009 02:38 PM
Re: Trouble Getting MSL with GETSPC...
 
Quote:
Originally Posted by 8notime (Post 1142492)
I always use this procedure:

Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1

* Wait a about 10 minutes (more time will not hurt), and soft-reset.

* Check to see that the file \Atlog\ATDbg0.txt has been created.

* Return the values back to what they were (most likely 0) waiting the same amount of time as above.

* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~


The numbers next to the Rx: +HTC_RMSL line should be your MSL

I've used this one too and have had good luck: http://forum.ppcgeeks.com/showthread.php?t=43560
That's it, thanks!

stevedusa 09-05-2009 02:44 PM
Re: Trouble Getting MSL with GETSPC...
 
Actually I just realized something... if you activated online by an ESN swap, the page where it ask you to do some programming, the "Secondary 6-digit code" is the MSL.

Glad I saved that page.

popdog54 09-05-2009 02:51 PM
Re: Trouble Getting MSL with GETSPC...
 
Quote:
Originally Posted by stevedusa (Post 1142508)
Actually I just realized something... if you activated online by an ESN swap, the page where it ask you to do some programming, the "Secondary 6-digit code" is the MSL.

Glad I saved that page.
Yes, I already mentioned that in the first post. Hopefully those who haven't received their TP2s yet will see this. It will save them some trouble.

freeza 09-05-2009 03:00 PM
Re: Trouble Getting MSL with GETSPC...
 
couldn't you have used BAF's MSL grabber?

popdog54 09-05-2009 03:02 PM
Re: Trouble Getting MSL with GETSPC...
 
Quote:
Originally Posted by freeza (Post 1142544)
couldn't you have used BAF's MSL grabber?
Maybe, I've never tried BAF's. Anyone try it? I was just pointing out that GETSPC didn't work on my Sprint TP2.

stevedusa 09-05-2009 03:02 PM
Re: Trouble Getting MSL with GETSPC...
 
Quote:
Originally Posted by freeza (Post 1142544)
couldn't you have used BAF's MSL grabber?
Tried it, not working.

freeza 09-05-2009 03:05 PM
Re: Trouble Getting MSL with GETSPC...
 
Quote:
Originally Posted by stevedusa (Post 1142551)
Tried it, not working.

I think it requires NETCFv2 if i'm not mistaken. I may install it to find out :)

stevedusa 09-05-2009 03:07 PM
Re: Trouble Getting MSL with GETSPC...
 
Quote:
Originally Posted by freeza (Post 1142555)
I think it requires NETCFv2 if i'm not mistaken. I may install it to find out :)
I had v2, v3.5 in the system. All it does is tell me that "There is an error grabbing your MSL code, contact" blah blah blah.

But the registry edit (ADLog) method or the ESN exchange page secondary code works.

freeza 09-05-2009 03:41 PM
Re: Trouble Getting MSL with GETSPC...
 
Quote:
Originally Posted by stevedusa (Post 1142561)
I had v2, v3.5 in the system. All it does is tell me that "There is an error grabbing your MSL code, contact" blah blah blah.

But the registry edit (ADLog) method or the ESN exchange page secondary code works.

ah, okay. as long as the end result is the same.

puff 09-27-2009 01:06 PM
Re: Trouble Getting MSL with GETSPC...
 
How to Guide has been posted here


All times are GMT -4. The time now is 08:52 PM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0