END KEY wont end the call!!! Im about to snap!.....Fix found!

ModmyPPC · #1 (**permalink**) 04-09-2011, 11:27 AM

The problem is that the end key button doesn't end the call when its dialing.

the phone just makes the dam call anyway and the worst part is that the end key wont hang the dam call! The end button on the screen wont end the call either

It goes through and the only way I can end the call is to go to the task manager and put the phone on airplane mode.

Does anyone have a fix to when I press the end key to automatically shut off all applications or put the phone on airplane mode or somethinng...anything..

Sometimes when I press the talk key, it makes the last call instead of just bringing up the dialer like it should... Then I panic and hit the end key but thats when it gets stuck..

-------------------

Fix found:

Both elesbb's and maxx134 recommendations work.

Elesbb's you can find in post #5

Maxx134 You can find in post #12

Ive been using maxx's Maxx134_FasterEndCal5_TunedSetttings.cab since he added it and It has fixed the problem.

Thanks to both you guys!

Make sure you give thanks to these guys if you use it!!!

**elesbb** · #2 (**permalink**) 04-09-2011, 01:19 PM

what's it do exactly ? I know when I hit the end button , it shows on the screen that the end button has been pressed , like the "end" button goes to a grayed out red . Does it do that ? also has a hard reset fixed it at all ? almost seems as if its software related . But you could use rhodium keyboard config to have the red end key (the physical button) to run a mortscript that will engage flight mode then wait like 3 seconds then turn it back on . That should work .

eric12341 · #3 (**permalink**) 04-09-2011, 03:51 PM

are u running the stock 6.5 rom or using the advanced config utility? either one of them can produce a delay in the dialer response. u can also just consider using the MS dialer as the HTC dialer is slower.

**AZTECHKA** · #4 (**permalink**) 04-11-2011, 06:17 PM

I'm just checking to make sure you haven't snapped yet.
p.

krnfrk6663 · #5 (**permalink**) 04-12-2011, 12:44 AM

I know this won't be much help, but I've had multiple roms do that to me too. It would majorly delay the ending, and I'd get to them answering before it would hang up. If you're up for it, tasking and flashing another would be the best thing to do. I can confirm it did it to me in sharkie's rom, and when I went to energy's new release, it didn't.. it also did it in the previous version of energy that I used... so I dunno where the relation is.. I just dealt with it for that time period.

**Maxx134** · #6 (**permalink**) 04-12-2011, 07:06 AM

Edit: EDIT: Edit:

USE "Maxx134_FasterEndCal5_TunedSetttings.cab (2.7 KB)" BELOW!

Also,to help in the "pressing" area:
try my "FingerTouch" cab as well,
As I made adjustments for incorrect presses.
It's below in my sig.

So, I basically looked into the aspects and sequences involved during the dailing process.
Then I made adjustments to everything that could add to the "dialer button" problem.
I also took into account the memory sharing, because custom dialers may take up more mem with grafics.

CHANGELOG:

nDialerTimeOut
ResumeInterval
ConnectingVibrationLevel
EndCallTime
KeyPadVibrationLevel
ShareMemSize

EDIT1: more changes added:
InitialDelay
DelaySeconds

FINAL: more changes and fine tuned settings:
EndKeyDelayInterval
nContactTimeOut
nDialerTimeOut
nHBPCDTimeOut
AccumulatorLimitLen

So try this cab I made, and let me know:
Try the latest one: "Maxx134_FasterEndCal5_TunedSetttings.cab (2.7 KB)"

Tip: don't panic and mash the "end" HARD KEY BUTTON 100 times!..
Just pressing hard key once with my cab,
and you will see the red end call softkey grey out!..

When Pressing the SOFTKEY:
when press twice, GONE!
by third press it already gone and pressing a number key!
or wait one sec before pressing ONCE!( I wouldnt take that risk :P)

**elesbb** · #7 (**permalink**) 04-12-2011, 09:39 AM

Quote:

Originally Posted by Maxx134

Try this cab I just made:

i take it the cab is simply the reg entry ?

ModmyPPC · #8 (**permalink**) 04-12-2011, 12:30 PM

Quote:

Originally Posted by elesbb

Copy cat ! i said that already -.- lol oh welll . your a VIP

But to the OP ,
Install attatched CAB and run Kdbconfig and link your END key to the script in the folder "Start Menu\Tools\FlightMode and Script" directory . And link your end key to the script in that directory .

Ive tested and it works beautifuly

I tried your regedit but the thing is It doesn't always happen so im not able to confirm if this works or not. Same thing is true with Maxx's cab. I currently have your regedit and maxx's cab and Im not sure if its helping or not I have to give it a few days.

Quote:

Originally Posted by Maxx134

Cantrary may be true and can be related.
Multiple roms chefs use same packages and similar kitchens.

Regardless, we need to know how much memory do you have left when that happens?
Are you running Sense?.. with CHT?

I am running Vinn's neodium from Jan and with 85mem free I have no such issues.
I am running Sense with CHT 1.8.5 as a test and still no prob.

I would suggest you having over 70meg free mem, and...
I would have to suggest you changing roms.
I Also suggest overclocking as well.
EDIT: Actually I think it is dialer related, so if you been changing skin that may play a part.

Right now Im running at running at 114mb of storage memory & 102mb of program memory oc'd at 768mhz.

I've changed roms and its happend on several different roms from several different chefs. But like I said before it doesn't always happen.

Im going to have to test your fix for a little while and Ill report back in a few days. I dont make too many calls but Its pissed me off when I do.

I just have to test it.

Thanks given to all who replied!

**elesbb** · #9 (**permalink**) 04-12-2011, 01:03 PM

Quote:

Originally Posted by ModmyPPC

I tried your regedit but the thing is It doesn't always happen so im not able to confirm if this works or not. Same thing is true with Maxx's cab. I currently have your regedit and maxx's cab and Im not sure if its helping or not I have to give it a few days.

Right now Im running at running at 114mb of storage memory & 102mb of program memory oc'd at 768mhz.

I've changed roms and its happend on several different roms from several different chefs. But like I said before it doesn't always happen.

Im going to have to test your fix for a little while and Ill report back in a few days. I dont make too many calls but Its pissed me off when I do.

I just have to test it.

Thanks given to all who replied!

are you talking about my fix ? lol , it works quite well , takes seconds to set up !

ModmyPPC · #10 (**permalink**) 04-12-2011, 01:34 PM

Quote:

Originally Posted by elesbb

are you talking about my fix ? lol , it works quite well , takes seconds to set up !

Yes I set yours as the long press. Which has worked very well. Maxx's is just the endcall button. If his gets stuck yours is my definate solution to nip it in the butt.

Maxx's cab seems to work very well There was one that escaped and the call went through but it delayed a second and then ended the call. I need to do more testing.