PPCGeeks - END KEY wont end the call!!! Im about to snap!.....Fix found!

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- HTC Touch Pro 2 (http://forum.ppcgeeks.com/forumdisplay.php?f=97)

- - END KEY wont end the call!!! Im about to snap!.....Fix found! (http://forum.ppcgeeks.com/showthread.php?t=142631)

Re: END KEY wont end the call!!! Im about to snap!

I know this won't be much help, but I've had multiple roms do that to me too. It would majorly delay the ending, and I'd get to them answering before it would hang up. If you're up for it, tasking and flashing another would be the best thing to do. I can confirm it did it to me in sharkie's rom, and when I went to energy's new release, it didn't.. it also did it in the previous version of energy that I used... so I dunno where the relation is.. I just dealt with it for that time period.

Re: END KEY wont end the call!!! Im about to snap!

Edit: EDIT: Edit:

USE "Maxx134_FasterEndCal5_TunedSetttings.cab (2.7 KB)" BELOW!

Also,to help in the "pressing" area:
try my "FingerTouch" cab as well,
As I made adjustments for incorrect presses.
It's below in my sig.

So, I basically looked into the aspects and sequences involved during the dailing process.
Then I made adjustments to everything that could add to the "dialer button" problem.
I also took into account the memory sharing, because custom dialers may take up more mem with grafics.

CHANGELOG:

nDialerTimeOut
ResumeInterval
ConnectingVibrationLevel
EndCallTime
KeyPadVibrationLevel
ShareMemSize

EDIT1: more changes added:
InitialDelay
DelaySeconds

FINAL: more changes and fine tuned settings:
EndKeyDelayInterval
nContactTimeOut
nDialerTimeOut
nHBPCDTimeOut
AccumulatorLimitLen

So try this cab I made, and let me know:
Try the latest one: "Maxx134_FasterEndCal5_TunedSetttings.cab (2.7 KB)"

Tip: don't panic and mash the "end" HARD KEY BUTTON 100 times!..
Just pressing hard key once with my cab,
and you will see the red end call softkey grey out!..

When Pressing the SOFTKEY:
when press twice, GONE!
by third press it already gone and pressing a number key!
or wait one sec before pressing ONCE!( I wouldnt take that risk :P)

Re: END KEY wont end the call!!! Im about to snap!

Quote:

Originally Posted by Maxx134 (Post 2083662)

Try this cab I just made:

i take it the cab is simply the reg entry ?

Re: END KEY wont end the call!!! Im about to snap!

Quote:

Originally Posted by elesbb (Post 2082853)

Copy cat ! i said that already -.- lol oh welll . your a VIP :)

But to the OP ,
Install attatched CAB and run Kdbconfig and link your END key to the script in the folder "Start Menu\Tools\FlightMode and Script" directory . And link your end key to the script in that directory .

Ive tested and it works beautifuly :)

Quote:

Originally Posted by Maxx134 (Post 2083538)

Cantrary may be true and can be related.
Multiple roms chefs use same packages and similar kitchens.

Regardless, we need to know how much memory do you have left when that happens?
Are you running Sense?.. with CHT?

I am running Vinn's neodium from Jan and with 85mem free I have no such issues.
I am running Sense with CHT 1.8.5 as a test and still no prob.

I would suggest you having over 70meg free mem, and...
I would have to suggest you changing roms.
I Also suggest overclocking as well.
EDIT: Actually I think it is dialer related, so if you been changing skin that may play a part.

Right now Im running at running at 114mb of storage memory & 102mb of program memory oc'd at 768mhz.

I've changed roms and its happend on several different roms from several different chefs. But like I said before it doesn't always happen.

Im going to have to test your fix for a little while and Ill report back in a few days. I dont make too many calls but Its pissed me off when I do.

I just have to test it.

Thanks given to all who replied!

Re: END KEY wont end the call!!! Im about to snap!

Quote:

Originally Posted by horndoctor (Post 2083467)

Wirelessly posted (htc Pocket PC: Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 7.11) Sprint MP6950SP)

Sure it could be a rom issue if something is corrupted in which case you should flash the shipped rom or run Task29 and then flash a custom rom.

I ALWAYS TASK29 before flashing a rom.

I just have to test whats going on in a few days with max and elesbb's fixes and see if it helps.

and to you AZTECHKA thanks for your consideration, or is it your waiting for a breakdown. :scratch:lmao:evil4:

Re: END KEY wont end the call!!! Im about to snap!

Quote:

Originally Posted by ModmyPPC (Post 2083740)

I tried your regedit but the thing is It doesn't always happen so im not able to confirm if this works or not. Same thing is true with Maxx's cab. I currently have your regedit and maxx's cab and Im not sure if its helping or not I have to give it a few days.

Right now Im running at running at 114mb of storage memory & 102mb of program memory oc'd at 768mhz.

I've changed roms and its happend on several different roms from several different chefs. But like I said before it doesn't always happen.

Im going to have to test your fix for a little while and Ill report back in a few days. I dont make too many calls but Its pissed me off when I do.

I just have to test it.

Thanks given to all who replied!

are you talking about my fix ? lol , it works quite well , takes seconds to set up ! :D

Re: END KEY wont end the call!!! Im about to snap!

Quote:

Originally Posted by elesbb (Post 2083766)

are you talking about my fix ? lol , it works quite well , takes seconds to set up ! :D

Yes I set yours as the long press. Which has worked very well. Maxx's is just the endcall button. If his gets stuck yours is my definate solution to nip it in the butt.

Maxx's cab seems to work very well There was one that escaped and the call went through but it delayed a second and then ended the call. I need to do more testing.

Re: END KEY wont end the call!!! Im about to snap!

there is a simple reg entry cab for the end call button....
Mine is a lil more complicated than that : p
EDIT: I will post details in above post.
Edit2: try my FingerTouch cab as well as I made adjustments for incorrect presses.

Re: END KEY wont end the call!!! Im about to snap!

Bumb:
updated cab 2 more settings
:study:

Re: END KEY wont end the call!!! Im about to snap!

Completed updated cab, use ver5
destroyed endcall problem!
(I hope)
Tip: don't panic and mash the "end" hard key 100 times!..
Just pressing hard key once with my cab,
and you will see the red end call softkey grey out..

When Pressing the softkey:
when press twice, GONE!
by third press it already gone and pressing a number key!
or wait one sec before pressing ONCE!( I wouldnt take that risk :P)