![]() |
Phone as modem not working
Sprint just replaced my TP with a TP2. It has the latest 2.04.651.4 ROM and Windows Mobile 6.5. I'm trying to get the tethering/phone as modem working. But I'm getting "67 Registration" errors anytime I actually try to connect. I've searched the forums and tried evertything I could find on this, like the steps outlined below. But everytime I soft boot the phone, the ForceCellConnection goes back to "phone as modem". Apparently, this stuff is getting forced there in the boot up routines? Is there some way around this?
I really need to get this working, so am open to ANY suggestions, like different ROM's, etc. Does anyone have this working with the latest Sprint ROM? Thanks in advance for any help. - Enable USB Teathering - 1. Go to: [HKLM\Services\CMGuardian] 2. Create a new DWORD Value called "Flags" and set the value data to "4" (if it is already there then skip) 3. Softreset 4. Go to: [HKEY_LOCAL_MACHINE\Comm\InternetSharing] 5: Delete the "isext.dll" entry 6. Go to: [HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings] 7. Change "ForceCellConnection" from "PhoneAsModem" to "Sprint" 8. Softreset Install ICS and WModem Fix.cab |
Re: Phone as modem not working
1 Attachment(s)
doesnt matter, 6.1 0r 6.5, no any Chef or ROM...this cab still works everytime..been usuing this cab for 2 yrs without fail or charges
|
Re: Phone as modem not working
Thanks for the idea. I've done several hard resets today, trying different configurations/methods. I am able to get the steps under the "enable tethering" part of my first post to stick now, but I still get the same "67" errors when trying to connect via the Internet Sharing program.
I also tried Tattoed's cab after a hard reset, but it deleted the Internet Sharing program altogether. So that was a no-go, unless I need to use some other method/program to connect with after using that cab? Again, is there a different/older ROM I can install to get this working? I don't care about having the latest release, especially if it means not being able to tether. Again, is there anyone that is able to tether with this release of Sprint's ROM? |
Re: Phone as modem not working
im runnin the stock 6.5 rom man.. upgraded from 6.1 like most.. this is same cab ive used every time.. you dont go change the registry then do the cab... the cabs do the reg stuff for you.... especially if you hard reset, you shouldnt of had issues after the cab..
|
Re: Phone as modem not working
Mr. X custom 2.5 rom for the win. I'm tethering now, no problems.
|
Re: Phone as modem not working
first off...ICS_WModem fix actually gives you ANOTHER interner share icon. Use the one that ONLY allows Sprint as your data connection. You don't need all those other regedits to get things going.
Secondly, there is also an app called WMWifiRouter. It is now a paid app. Once upon a time, it was free. I'm sure if you searched/googled enough you'll run across a free/OLDER version. I personally suggest paying for it...because it is worth what you pay AND THEN SOME! Lastly, before you do anymore...I'd say clear storage (hard reset) and start over fresh. |
Re: Phone as modem not working
I have this same problem. I had a diamond that did not have this problem with 6.5, so I'm confused about what it could be
|
Re: Phone as modem not working
Quote:
|
Re: Phone as modem not working
Quote:
Quote:
Quote:
|
Re: Phone as modem not working
Quote:
|
Re: Phone as modem not working
Quote:
|
Re: Phone as modem not working
Quote:
Error Code 67 Registration failure. Your PCS Vision username and/or password may be incorrect. Please try again. I'm using blanks for id and pw, like I always have for tethering. Any other suggestions? And thanks for letting me know you do have it running on the current ROM. But it makes me scratch my head even more about it. |
Re: Phone as modem not working
Quote:
but I heard the paid newer version doesn't do this so if you get your tethering working, it might be worth it to you. not to add to your frustration, but I just tethered last week (4g usb stick wasn't getting signal). had no problems. started ics, waited for it to say usb disconnected, connected, instant access. i'm using a personal build ROM though that might have older software that works. |
Re: Phone as modem not working
I've been using the stock program on Win 6.5 no edits or anything, but i'm curious what everyone else's top dl speed is. I'm getting about 75 kb/s. Is there anyway to increase the speed? and are the reg edits really necessary?
|
Re: Phone as modem not working
Quote:
Hey I installed the cab to my phone. I never tried tethering before so im a noob. what do I do next? |
Re: Phone as modem not working
Not trying to be a hardnose or anything here, but I'd appreciate it if we stayed on topic. I really need to get tethering working on my phone. Thanks.
|
Re: Phone as modem not working
i've never needed to enter a user name or password when I tether. i always just opened ics, waited for it to say usb connection failed, then connect. that's all.
under settings/connections go to manage existing connections and what do you have? for modem, the only one I have is sprint with #777 out beside it. then under advanced, I have sprint as the autoconnect network and My work network for the private network. |
Re: Phone as modem not working
Just installed the ICS WModem Cab, did the soft reset and it connected within a minute using usb. and getting 10mbps... not sure if that is any good compared to any of you alls.
Thanks All, A heck of alot easier than VZ Access manager. |
Re: Phone as modem not working
Quote:
|
Re: Phone as modem not working
I would try either the new Mr X. rom or the New Mighty Rom. Mike spent almost 4 days playing with the new sprint ROM, because they did add something to the stock that will reset the settings to prevent tethering. Mike did find a solution and it is cooked into his new ROM. There are tons af people that use his rom (myself included) that tether and have not had any problems. I mentioned Mr. X's Rom because him and Mighty work together on a lot of stuff so the new Mr. X should have the new tethering fix also. There is also a cab in the sticky for mods/cabs (cant remember the exact name sorry) that Mighty Mike put together that will help. But I WOULD definately check out the New Mighty Rom.
Hope this helps man! |
Re: Phone as modem not working
1 Attachment(s)
Try this free wi-fi router, works great.
|
Re: Phone as modem not working
Quote:
|
Re: Phone as modem not working
have you tried to flash your phone back to stock 6.1? that might solve your problems.
sorry, tried to upload it here, must be too big of a file. you can go here and get it: http://forum.ppcgeeks.com/showthread.php?t=91940 it's the first sprint ROM, just under the verizon one. |
Re: Phone as modem not working
Quote:
|
Re: Phone as modem not working
1 Attachment(s)
I had the same problem. I use this as the app. It looks like the other internet sharing icon but has a second drop down box.
first box (pc connection) should be set to usb second box (network connection) needs to be changed from phone as modem to "sprint" I accidently changed my password playing with it and got the error 67. I called sprint and told them what I was doing and they said they dont allow using the phone as a modem. I didn't know I couldn't untill they told me. I asked to be transfered to tech support. I told tech support i couldn't log onto the internet from the phone. The user name and password is from sprint Tech support had me dial ##3282# That took me to another page where they gave me a code to unlock the page They reset the username and password for me on their end. it was like my name then 12345609@sprintpcs.com the password was random too I did a hard reset and installed the internet sharing app again and viola.. works perfect. hope this helps. Don't tell them you are using it as a modem... just say you cant get onto the internet from the phone. Have them reset the username and password for vision. Also, make sure your wifi is turned OFF on your computer |
Re: Phone as modem not working
Man, this is frustrating. I've been trying to install some of the other ROM's, but my XP Thinkpad and our Win7 laptop both have fits about the hard SPL unlock programs. They come up as viruses, trojan horses, etc. Just one thing after another. I'm going to try another hard reset and try Boo Boo's method one more time with a twist of trying to have a data connection already open before starting the IS app. If that doesn't work, it's back to trying to get the phone unlocked so I can load a ROM. :banghead:
|
Re: Phone as modem not working
Finally got it working. The plan in my last post worked. I just have to remember to get a data connection open before kicking off Internet Sharing and plugging the cable into the computer. I can do that by either going into comm manager and turning on Data Connection, or bringing up a website on a browser.
Thanks for everyones help. I appreciate it all the effort to help me resolve this. Now I can get on with customizing the other parts of the phone. |
Re: Phone as modem not working
Quote:
Sorry man, this cab doesn't work on new phones from Sprint now, so quit saying it's so great. maybe if you're upgrading from older ROM it's fine and maybe if I install downloaded ROM. But fact is that it's not working on from Sprint stock. I might try downloading the "stock ROM" and see it it'll take from that, but thought others with replacement phones that can't get it to work, go ahead and punt on Tattooed's cab. It's from the Diamond, so looks like it might be showing its age. The registry edits require the quotes in "Sprint" to be there for mine to work ples start a internet connection first and goto "tools" icon for ICS.--RR |
| All times are GMT -4. The time now is 08:36 AM. |
Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com