HELP! TP2 touchflo3d is gone
 

My sprint TP2 touchflo3d just stop working. I need help. Can I put the WM6.5 on it now or the android?

Re: HELP! TP2 touchflo3d is gone
 

hhhheeeeellllpppppp

Re: HELP! TP2 touchflo3d is gone
 

can u give a little more on wat happend

Re: HELP! TP2 touchflo3d is gone
 

"Stopped working" is fairly vague. Did it stop working after you installed something? Have you tried soft resetting your phone? What else have you tried.

With the provided information at my current disposal I suggest a hard reset of your phone. (Don't forget to back up your data with something like SPB backup)

P.S. Sending messages to ever user that visits this page probably wont help your cause much.

Re: HELP! TP2 touchflo3d is gone
 

it keeps tryn to reset, and starts looking to contact service provider.
I was running stock and havent really put anything on it.

Re: HELP! TP2 touchflo3d is gone
 

i dont know what really happened. it wont go 2 the normal screen. I can make calls, that about it.

Re: HELP! TP2 touchflo3d is gone
 

i did a hard reset and that didnt help. when i restart it it trys to contact service provider. When I hit cancel it goes to a blank screen.

Re: HELP! TP2 touchflo3d is gone
 

what did you install before it went blank?

Re: HELP! TP2 touchflo3d is gone
 

Aside from the question being completely unintelligible, you're still not giving us much to go on. Why do you stop it from contacting the service provider? Thats part of the system's set up procedure.

Re: HELP! TP2 touchflo3d is gone
 

Hey, I heard you needed help :)

Re: HELP! TP2 touchflo3d is gone
 

Are you getting any error messages?
If so what code?
Does it load tf3d?
You say you on stock. Is you device unlocked?

Re: HELP! TP2 touchflo3d is gone
 

hmmm...you're worried about your phone's TF3D not working but turn around and ask if you can now flash to a new rom. im not really sure the question makes sense at all. you will need to give more details than what you have already posted. you might get better help/responses if you tried to list what you did or were doing step by step prior to you having the issue(s) you currently have. and bradart is correct regarding the "contacting the service provider" message. if your phone phone can't contact to the provider, you will not have the necessary service to make your phone work. but have you checked Settings> Today> Items screen to see if you have TF3D checked? you may have somehow disabled TF3D.

remember...the help you get is only as good as the information you tell people.

Re: HELP! TP2 touchflo3d is gone
 

Hey all, not to hijack on the OP's thread, but I have that same problem as well... well it's my friend TP2. He's been running stock rom since he got the phone so his device is still locked.

He's running Windows 6.5 stock with a couple of cabs, I believe one for triggering roaming, and the other is just to get the task manager to show up on the corner. He told me that he fiddled with the registry (somewhere for the touchflo to free up more memory or something to it) and when he did a soft reset, it goes to the today screen and 'tap here to launch HTC sense'. When he tapped it, nothing would load. Also, the battery meter keeps reading it as 0, even when it was plugged into a charging cable. Pressing calendar or contacts gives me an error saying that there is an unsigned certificate, and I cannot do a hard reset (pressed the power + the two end buttons and it gives me an error 'shortcut target - error opening the shortcut or locating the target filename')

I'm aiming to just reflash his phone to solve the problem, but the pc doesn't recognize it as connected in activesync. I've never tried to flash it via the SD card, but I'm not sure how to as I've never done it before, and his phone is locked.

Please advise, and thanks in advance for any tips and help!

Attached are some pics of what I'm describing.

Re: HELP! TP2 touchflo3d is gone
 

Alright! I'm so glad I solved my own problem. I was so freaked out because the guy needs his phone for work later on tonight, so I was kind of on a deadline. Thank goodness for the option of Hard Resetting. I finally got it to work (hello! Gotta take out the battery first and make sure you don't press the power button first -___-) and it worked like a charm. Now it's back to normal.

:)

Re: HELP! TP2 touchflo3d is gone
 

are you sure you did a hard reset?
do this:
push power+send+end and poke the reset hole under the back cover (next to the volume down button) with your stylus
when it prompts, approve the reset