![]() |
Device Configuration and Hands Free Activation TP2 Errors
these 2 messages r killing me every second i do have them on my screen i dont know what should i do i hate my tp2 bcoz of them and the problem now when the device start searching for the update im losing the signal for 1 min or 2 and when i have this message The profile could not be completed error code : 1012 i have the signal back plz plz i need help from u guys thanx.
|
Re: Device Configuration and Hands Free Activation TP2 Errors
help plz
|
Re: Device Configuration and Hands Free Activation TP2 Errors
Call tech support.
|
Re: Device Configuration and Hands Free Activation TP2 Errors
I have the same problem, but it doesn't happen often. I can't figire out how to clear it or delete it.
|
Re: Device Configuration and Hands Free Activation TP2 Errors
is there away plz???????????
|
Re: Device Configuration and Hands Free Activation TP2 Errors
Im having the same exact problem every 10 mins or so it trys to connect and the stupid sign keeps comming up GRRRR..does anyone know how to fix it or at least just get it out the way
|
Re: Device Configuration and Hands Free Activation TP2 Errors
Just started happening to me yesterday. Hands Free Activation automatically starts on boot, is successful if you let it go, but then automatically does a soft reset. On reboot, Hands Free Activation starts again, rinse, repeat.
If you cancel out of the activation, TouchFlo 3D fails to load and the device is ridiculously sluggish. Sprint Tech Support told me to update my profile and PRL, which I did and did not help at all. Last programs I installed were S2U2 and Advanced Task Manager, at least a week ago. |
Re: Device Configuration and Hands Free Activation TP2 Errors
Quote:
|
Re: Device Configuration and Hands Free Activation TP2 Errors
any update or solution 4 this?
|
Re: Device Configuration and Hands Free Activation TP2 Errors
did anyone use sprite backup to restore their phone that was causing mines i got a replacement tp2 and used sprite to restore my phone and the message kept coming up everytime what i had to do was a hard reset and install all my programs again
|
Re: Device Configuration and Hands Free Activation TP2 Errors
anyone got a solution on this yet?! Mine's on MetroPCS so can't call cust.svc. and Hard Reset, assuming ya'll are talking about flashing w/ stock ROM... still same. any help appreciated. thnx.
|
Re: Device Configuration and Hands Free Activation TP2 Errors
for the sprint people...if you can get the MSL on the phone a ##786# which is a full wipe and restore plus an actual wipe on the phone number and programming info may help..if you're doing just Clear storages it doesnt usually wipe any wrongdoings with the programming info. a ##3282# may also work which is JUST a wipe and restore on the data services without the actual hard reset on the phone...both of these are what we use at our repair center..both you have to have the MSL which some people may or may not be able to get. for the sprint people, it may be better to just flash back to stock if your on custom...and take your phone to a repair center...not sure of the answer for Metropcs people
|
Re: Device Configuration and Hands Free Activation TP2 Errors
Quote:
|
Re: Device Configuration and Hands Free Activation TP2 Errors
Quote:
Everything was fine, I was surfing using Opera 10 mobile, turned my screen off to do some actual work at work and then turned the screen back on the same way I've done for the past 8 months and it's weirdo city. Turned it on/off, removed battery... I have no idea why this happened. I haven't done anything new in weeks... I don't get it. Soft reset doesn't help. I'm using sprint, so a trip to a sprint store will be on the list tomorrow. I'd hate to lose my stuff, but I did just do a backup of my contacts and texts to myphone.microsoft.com FYI I am a total noob when it comes to these phones. I haven't really done anything to my phone except install groveshark a couple months ago and googlemaps. Edit: What is an "MSL"? Also to be specific about the other issues, correct the touchflo doesn't work which means it limits many of the phones abilities and is soooo slow I really can't even send a text message via the file explorer type layout. This is a pretty bad situation and my job requires my heavy use of this phone. |
Re: Device Configuration and Hands Free Activation TP2 Errors
This washappening to me today & yesterday. Just cleared the storage and now everything is back to normal
|
Re: Device Configuration and Hands Free Activation TP2 Errors
the 1012 & the 67 errors popped up in the last week for me.
Now my phone calls are not coming through. I wiped away all data back to stock & it has not helped. Next step is to call SPCS. |
Re: Device Configuration and Hands Free Activation TP2 Errors
Sprint just replaced my device because they could not resolve this issue.
|
Re: Device Configuration and Hands Free Activation TP2 Errors
1 Attachment(s)
Found a Solution finally!!! thnx to "sprintgirl" in this THREAD. Now it may not work for everyone, but sure did for me w/ the same symptoms. I'll attach a copy of the file here, just make sure y'all thank her for it.
p.s. I didn't have to, but you might wanna update your PRL file for those on MetroPCS. |
Re: Device Configuration and Hands Free Activation TP2 Errors
are these the same ones install on our phone already,if you look under settings, system thats is where mines is located
|
Re: Device Configuration and Hands Free Activation TP2 Errors
Quote:
|
Re: Device Configuration and Hands Free Activation TP2 Errors
I'm having the same problem. I'd like to try the cab but don't seem to be able to.
When I plug the phone into my computer it's no longer recognized as an external drive so that I can copy the cab over. But even if I could copy it over the file explorer doesn't seem to recognize the micro sd card. I copied the cab to the sd card but it does me no good since the phone can't read from the card. And of course I can't download the file to my phone because I can't use the Internet. And suggestions on how I might run this file??? I am really freaked out because since I can't download or transfer files to my phone I'm worried Sprite backup isn't going to be an option for backing up my data. All I care about are my contacts & SMS. Is there any way to manually back these up? Are there specific files on the phone which I can copy? In addition, removing the battery makes things worse for me. When I remove the battery and restart I get a screen of death kind of message telling me that the phone was improperly shut down and I have to do a soft reset. But of course I opt out of the hard reset. |
Wirelessly posted (htc Pocket PC: Opera/9.5 (Microsoft Windows; PPC; Opera Mobi/15954; U; en))
Quote:
The pim file in the root dir contains your contacts. Then after doing your backup do a clear storage/hard reset. |
Re: Device Configuration and Hands Free Activation TP2 Errors
Quote:
Is there a file containing my SMS? |
Re: Device Configuration and Hands Free Activation TP2 Errors
Quote:
The phone makes a bong sound when I insert the card but when I look at the SD card info the phone tells me there is no SD card. Very annoying. Is it possible to plug the phone into the computer in a way that I can write directly to the phone's internal memory? What about transferring files via bluetooth? Can I transfer to/from the phone's internal memory via BT? My Mac is the only computer I have w/ BT, can I transfer files via BT with a Mac? Is there a file containing my SMS? TIA! |
Wirelessly posted (htc Pocket PC: Opera/9.5 (Microsoft Windows; PPC; Opera Mobi/15954; U; en))
Quote:
I didn't think of this earlier but you might want to upload your contacts and I believe sms as well to Microsoft MyPhone. Then clear storage and restore files. |
Re: Device Configuration and Hands Free Activation TP2 Errors
thx very much! FINALLY it is done!
|
Wirelessly posted (Sprint Touch Pro 2: Opera/9.80 (Windows Mobile; Opera Mini/5.1.21594/21.564; U; en) Presto/2.5.25 Version/10.54)
Quote:
|
Re: Device Configuration and Hands Free Activation TP2 Errors
I`m kill all link in Windows\Startup and this warning none.
|
| All times are GMT -4. The time now is 02:42 AM. |
Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com