Ev mode keeps dropping to 1X after Radio and ROM update
 

I have one issue. When I start up the phone it is in Ev mode. When I go on the internet for one it is slow then the Ev changes to 1X. It never did that before when i was on the stock USCC ROM and Radio. Also now when I use google maps it is much slower I am assuming b/c of 1X mode. Yes now GPS works but Data is slower. After it goes to 1X it does not go back to Ev Mode. I dialed *228 to update the PRL but that did not do the trick. Am I missing anything.

Here is what I updated to :
Radio: 3.42.40
ROM: dcd 3.3.4
PRL version: 15069
PRI 1.32._013
US Cellular

Thanks

Re: Ev mode keeps dropping to 1X after Radio and ROM update
 

This problem has plagued me when I had the Titan and I still have this problem on the TP. The only way that I have found to resolve it is to place a call (voicemail) and then hang up. It will usually go back to Ev after that. But the problem still occurs

Re: Ev mode keeps dropping to 1X after Radio and ROM update
 

Try switching to flight mode, then back to phone. You may be in a area with weak signal.

Re: Ev mode keeps dropping to 1X after Radio and ROM update
 

Here is what works guys. BTC helped me out and this is what he instructed and I verified it works.

Couple things to check. Make sure you have loaded the DCD USCC Carrier.cab, this should hopefully restore the ability to run #778. If not, browse to the windows folder and run EPST.exe.

Choose edit, enter your SPC code. Go to the Security tab, and then there should be 4 lines listed, the first two are EVDO login and password (labeled HDR) and the 2nd set are your 1X login and password.

The HDR login and password should be
YourESN@uscc.net and YourESN for the password.

your esn should be in hex and in caps, i.e. A1B2C3D4@uscc.net, and then the same for the password but without the @uscc.net.

The 2nd set should be yourphone#@uscc.net and yourphone# as the password, i.e.
6411234567@uscc.net and 6411234567