![]() |
XV6800 Upgrade sequence
Thank you to all who have helped me in this forum so far.
I wrote this today and it worked. I've been out of luck since Wed but I don't give up. STEP ZERO (most who get to this post have done this much) Download WMDC or ActiveSync depending on your OS version. XP needs ActiveSync 4.5 http://www.microsoft.com/downloads/d...DisplayLang=en Vista needs WMDC http://www.microsoft.com/downloads/d...DisplayLang=en Connect your phone via USB to your computer. Download Titan Unlocker and extract this into a folder. http://forum.ppcgeeks.com/showthread.php?t=9093 Run Titanunlocker.bat (if 64 bit, edit the batch file or ignore the sleep4.exe errors) It may prompt you on your device to run jumpspl.exe, say yes. You will then see red green blue white screen with Spl 2.40.Olipro Disconnect USB, then reconnect USB Hit Enter and follow the RUU prompts on the screen This replaces your Stock Boot loader to the SPL 2.40.Olipro version and unlocks your phone. Click Finish. STEP TWO In the Hard SPL directory find this file, Hard_MFG_SPL_2.40_RUU_signed.nbh. rename or move it. I just add a .DONE extension so the RUU won’t find it. Extract this radio, Titan_radio_rom_3.42.40.zip and place the TITAIMG.nbh in the Hard SPL directory. http://forum.ppcgeeks.com/showthread...om_3.42.40.zip Run ROMUpdateUtility.exe from the same HardSPL directory, following the prompts until it says Finish. This updates your radio on your phone STEP THREE Then I run this custom packs, pick your own or make your own, it’s up to you. dcd_titan_3.2.5.exe- under the ROM section http://forum.xda-developers.com/showthread.php?t=413039 Click Finish Windows Mobile 6.1 is now on your device Align the screen, customizations will run and reboot your device. STEP FOUR Execute this fix dcd Verizon Carrier 20080719.cab (and not 100% sure on this fix, Titan_Key.cab, but I do it anyway) http://www.lifesnotsogood.com/dcd1182/carriers/ http://utstar.com/pcd/downloads/XV68...x%201-9-08.zip STEP 5 (This is paranoia, unplug from USB and do a soft reset, prob not required) STEP 6 *22899 (does *228 option 1 and 2 at the same time) You will see SPL Unlocked Then Programming in Progress PRL download is complete NAM download is Complete MDN download is Complete Programming is Complete Programming is Successful and it will reset your phone If you’re A Key Survives, you are golden, if not, then 18009220204 for Verizon Support or if you have a second Verizon phone, you can log on to the website, click on your existing phone, click on Activate a Phone. Type in your old phone ESN, wait 10 min, *22899, it should soft reset, then go browse website. Go back to the website, do the same thing with your ESN on the phone you updated, wait 10 min, *22899, it should soft reset. You may need to type in yournumber@vzw3g.com and vzw as the password, but you should be back in biz. |
Re: XV6800 Upgrade sequence
I've had my Verizon XV6800 for about a week - first WM phone for me, and this post is just what the doctor ordered. I need to continue reading and researching for a week or two more before I try this, but I've bookmarked this thread to use as my guide. Many thanks!
Cork |
Re: XV6800 Upgrade sequence
It's not that hard with a little reading. If your on Verizon, I am sure you read about needing an AKEY after flashing with a GPS rom. I will tell you if you use the newer .50 rom, I didn't need to call for an Akey, it just worked as it should
|
Re: XV6800 Upgrade sequence
I gave THX and just wanted to say it also.
|
Re: XV6800 Upgrade sequence
okay, I am getting a titan in two days...are you saying I should upgrade before I activate then activate the phone under my account? would that be easier? also this adds gps support plus 6.1 on my phone if so this is golden and JUST what i was looking for.....should I worry about effin up my phone?
|
Re: XV6800 Upgrade sequence
Quote:
|
Re: XV6800 Upgrade sequence
I think I am stuck, I got as far as loading the unlocker, but I do not know how to get to the hard spl directory..please help.
|
Re: XV6800 Upgrade sequence
Its it the root of your C drive on your PC.
C:\ttn240mfg |
Re: XV6800 Upgrade sequence
okay so I did everything and now I dont have any data..where am I going wrong?
|
Re: XV6800 Upgrade sequence
never mind got it working, just missing wireless sync
|
Re: XV6800 Upgrade sequence
hmm, ok i just followed this and now i'm stuck at the 4 color screen. i was only able to make it to step 2. it says
TITANA100 MFG SPL-2.40 Olipro CPLD-9 soft reset, remove battery, and running trying to flash it back by usb to the stock verizon has no effect. after the verizon reflash Olipro still shows. any hints? |
Re: XV6800 Upgrade sequence
Keep in mind that when you are going to flash the BL to 2.4 you need to also be prepared to change the radio and ROM as well. Dont start and stop like I did or you will have issues. But now it sounds like you are stick in BL mode right?
Well this isnt too hard. Go into ActiveSync and disable USB. The go into C:\ttn240mfg and click on titan_exitbl.exe and this should kick you out of BL mode. Once you are out remember to go back into AS and re-enable USB so you can sync later. Now mind you when I did mine just like this and didnt load a new radio/ROM, whenever the device would go to sleep it would not wake up and I would miss calls/txt. After flashing to a radio/ROM the issue was resolved. Good luck |
Re: XV6800 Upgrade sequence
ok i got it working last night. a little flashing this, flashing that-lol/jk. i finally got it together and it booted right into 6.1. installed google maps and live search, changed some settings and gps locks in about 1 minute on 6-8 sats, inside my house.-wow-.
thanks for you peeps that stay up later than i do to make some 900+ pages of stuff to get the now how. RD |
Re: XV6800 Upgrade sequence
okay one thing....my mms isnt working after doing this...where can I get the settings, or fix for that? my friend sent me two mms and I didnt get either one.
|
Re: XV6800 Upgrade sequence
second phone--. i followed these to a -t- and now the phone keeps searching for a cell signal? call verizon?
|
Re: XV6800 Upgrade sequence
called verizon, went through pretty much everything and they said to bring it in for an exchange....well thats not going to happen just yet. i think i may have flashed the wrong radio rom. any indications other than this, that might be the issue?
|
Re: XV6800 Upgrade sequence
This might sound stupid but if you unlocked the phone how do you get it to be locked again? Wont unlocking the phone interrupt services?
|
Re: XV6800 Upgrade sequence
Quote:
|
Re: XV6800 Upgrade sequence
Quote:
|
Re: XV6800 Upgrade sequence
Quote:
my issue was radio rom 3.35.04. somewhere i got a file crossways and found my issue but not after a few hours. mind you this was my second phone to flash so i know i did it right once. just had to duplicate it. once i followed the restore thread for verizon, i started from scratch and got it done in about 15 minutes. 3.35.04 dorks with the cell reception on this verizon phone. might be worth a note somewhere. Thanks again.! |
Re: XV6800 Upgrade sequence
Okay, I'm missing something very simple here. How do I execute Step 4? I have the Verizon Carrier Cab, but am unclear on how to apply it.
Thank you! |
Re: XV6800 Upgrade sequence
I assume since it is a CAB file that you would DL it and transfer it to your device and then click on it to run it. Honestly, I didnt do that but then again Im not running DCDs ROM due to I cooked my own so that may be why I am fine without it.
|
Re: XV6800 Upgrade sequence
Pretty odd issue here, I cant update the radio.
I'm trying to go to radio 3.42.40 as I'm on verizon and the gos is shot for the moment and I remember that radio worked good with a cooked rom. I follow the steps and get into the bootloader to run the radio update, emane the file, move the radio file and run the update. Then after right at 8% it fails. I have tried this on 2 pc's some 8 times all with the same results. "This update utility cannot be used with your phone" There is a little string of digits at the bottom left "UI2" if that means anything. I cant make out what I'm doing wrong. RD |
Re: XV6800 Upgrade sequence
Download radio. Rename to correct Tit____.nbh I always forget the name. Put on SD card. Then put phone in bootloader.
|
Re: XV6800 Upgrade sequence
Quote:
|
Re: XV6800 Upgrade sequence
1 Attachment(s)
I suggest you get one because a sd card eliminates many problems. Maybe use a different updater. Attached in one I have used.
|
Re: XV6800 Upgrade sequence
Quote:
I just hate to drive 20 miles each way to get a card. |
Re: XV6800 Upgrade sequence
That is all I know. What version are you changing the radio from?
|
Re: XV6800 Upgrade sequence
Quote:
I think thats the verizon stock radio from mr1 and mr2. |
Re: XV6800 Upgrade sequence
Is the phone unlocked with 2.4 or 2.47. Because I think it needs to be to upgrade with a stock rom. Assuming you have a stock rom.
Don't forget the thanks button |
Re: XV6800 Upgrade sequence
Quote:
My tricolor screen says TITA100 MFG SPL-2.40 Olipro CPLD-9 That should be right, I thought it was? The rom is dcd 3.2.5 for the moment till I get my radio where I know it worked "better". Are you saying I need to go to mr1 then flash the radio? |
Re: XV6800 Upgrade sequence
No you should be fine. My only answer is to try sd method sorry.
|
Re: XV6800 Upgrade sequence
Quote:
Ahh I finally saw a small sight of the message. "No image file"?? This is pretty wierd. I also got an 8gig card while I was there. 30 bucks, not bad. RD |
Re: XV6800 Upgrade sequence
Did you format the sd card itself? Also was the file this name exactly including caps in name and not in extension. TITAIMG.nbh
|
Re: XV6800 Upgrade sequence
Quote:
I did format the card, I have checked the renaming some 10 times. Sheese if I could only get the radio right I'd flash a new rom.... |
Re: XV6800 Upgrade sequence
Just so you know your radio is fine for any gps rom. It may not be the best but it will work.
|
Re: XV6800 Upgrade sequence
Quote:
Yup i'm aware of that, thanks. I know the one your using works "better". Much better imho. |
Re: XV6800 Upgrade sequence
argh!! still at it..even after cooking bbq and alot of beer with some people.
RD |
Re: XV6800 Upgrade sequence
OK I got it.. ARGHHHH
It had something to do with olipro and nuespl. I dont exactly know what but I had to revert to fully loading everything from the sd card. This phone is a refurb from verizon if that matters any. I finally was able to get the radio to load from the sd card the4 hard way/or easy way..whatever. the radio I remember worked the best. Now we see from here. Thanks have been given RD |
All times are GMT -4. The time now is 03:07 AM. |
Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com