Wrong Bootloader
 

I flashed my phone from 3.35 to the new stock 3.56 rom with no problems. I then unlocked my phone and proceeded to flash kaos take 3 rom. Everything went fine but the phone resets every time i get to the calibrating screen after bootup.

I've found out that the problem is that I unlocked with the 1.20 olipro bootloader instead of the 2.40. I followed some advice and tried to flash to a stock rom, but whenever the progress bar reaches 11% the phones resets back to the bootloader screen and the RUU says error and wants me to do recovery. I've tried with both 3.35 and 3.56 stock roms multiple times but the same thing happens.

Can anyone help please? ](*,)

Re: Wrong Bootloader
 

try flashing the stock from sd

Re: Wrong Bootloader
 

edit: ok i name the stock nbh TITAIMG.nbh right?

Re: Wrong Bootloader
 

i tried to flash the stock roms via sd but it says

TITAIMG.nbh - FAIL

BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK

OS -

Update Terminate
UPDATE FAIL

the progress bar on the bottom looks to be at around 11% as well



UPDATE FAIL

Re: Wrong Bootloader
 

Did you format the card to fat32....if so keep trying your only fix is for it to take one of those stock ROMS......BTW is the Kaos ROM for the Titan? Never seen that one....

Re: Wrong Bootloader
 

yes i formatted fat32 and tried both the stock 3.35 and 3.56 roms. the full name is kaos f*** sprint rom over at smartphonejunkie. oh and yes its for the titan.

Re: Wrong Bootloader
 

so i've been reading and since it resets at 11% when I try to flash the stock rom, the radio is the problem? can i flash just the radio that is suitable with olipro 1.20? then try flashing stock?

Re: Wrong Bootloader
 

If you are on a 1.20 bootloader you need to flash a pre-GPS OS either via usb or SD then unlock with a 2.xx SPL once you get into WM.

Re: Wrong Bootloader
 

What about what I've read about going from GPS to non-GPS bricking your phone? I'm sorry I'm just trying to be extra cautious.

Re: Wrong Bootloader
 

The radio never updated because you were never un-locked properly....just flash the stock rom....you will be fine...

A non GPS stock rom.....hang on and I will find it....

Here ya go.....try any of these

Sorry too.....I missed the post last night that you were trying 3.35 and 3.56.....If I would have noticed you would have been up and running last night.....but it was late...lol


2.08
ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.08_RUU_signed.rar
2.16
ftp://up.ppcgeeks.com/Titan/Users/Im...nt_2.16_OS.nbh
2.17
ftp://up.ppcgeeks.com/Titan/Users/Im...RUU_signed.rar

Re: Wrong Bootloader
 

Ok. I downloaded 2.17 from http://forum.ppcgeeks.com/showthread.php?t=21953
I hope it works finally!

Re: Wrong Bootloader
 

Ok... I'm all good to go now! FINALLY! Thanks everyone.

flashed the stock sprint 2.17 rom
unlocked using olipro 2.40 bootloader
flashed the stock sprint 3.56 rom
flashed to custom rom

Re: Wrong Bootloader
 

Good to hear......Happy Flashing!!!!

Re: Wrong Bootloader
 

I have the exact same problem, except ActiveSync is no longer seeing my Titan. I do not know how to flash a non-GPS version (like the ones above - 2.16; 2.17) without ActiveSync. I know USB connection is working, just activesync is not acknowledging the device is connected. Any otherway of flashing a non-GPS?

Re: Wrong Bootloader
 

You can flash using the SD method. Use winrar to open the files he gave. Take out the RUU_signed.nbh. Then you can use the SD card method. Read the section about the SD method on my tutorial. It is linked in my signature.

Re: Wrong Bootloader
 

Ga.Medic, your instructions were fantastic, from beginning to end. I had created a mess of the whole thing, but I am finally home and very happy with what I've got.

THANK YOU!!!

Re: Wrong Bootloader
 

Glad you got it working.