power cycles after flash
 

So my guess is that this is a new one, since I couldn't find anthing on the forums about it.

Last nite I installed titan unlocker by olipro. i installed radio 3.35 and then used buildos to build a rom (5067) and then flashed my phone. the first time with no modules.

as i was at the screen to tap for alignment, it cut off and rebooted. it did that about 4 times. so i decided to reflash it with some modules. the problem continued once it was finished booting, it would turn off and reboot. i figured out that if i plugged it in to power it would stay on, but only for about 30 minutes and then it would reboot.

rom 3.49.NO2.5066
radio 3.35.04

please help.
Bryan

Re: power cycles after flash
 

Continual reboot is usually caused by an incompatible bootloader version. What is the bootloader version that you are using

Re: power cycles after flash
 

tita100
spl-1.20.olipro

Re: power cycles after flash
 

I'm pretty sure that you need 2.40 to run a custom ROM. Try using that bootloader and then reflashing. It can be obtained
http://forum.ppcgeeks.com/showpost.p...32&postcount=1

Re: power cycles after flash
 

And since you are using a No2Chem ROM you might want to consider using his new (updated) loader - it's version 2.47.

tsp

Re: power cycles after flash
 

seems to be rockin. thanks man, here and via thanks button.

Re: power cycles after flash
 

tsperez, since its working, i think ill stick with the old one. unless i decided to change modules. thanks though, if i do, i will certainly use the new one. i had a mogul brick on me a few weeks back during the simple unlock, so im a lil nervous about messing with it too much