CANNOT connect to mogul through USB and PC?????
On the home machine Vista 64 bit, at work XP, both systems, same issue.... connect to usb cable, turn phone on, hear "connection chime" on PC, windows mobile device center should open, it doesn't.... Now there is an icon in the sys tray, "add/remove USB device", right click and device is HTC mobile sync. Look @ device manager, sometimes see "HTC mobile sync", sometimes "windows mobile device" (sys tray icon same either way). I can navagate to phone in "my computer" try to transfer files From phone get "access denied" try to put file On phone I get "cannot transfer file xxxx. File may be corrupt or may not exist" or something to that note. So far I have tried all settings on phone for connections, and active sync (connect is greyed out in active sync in phone) Mobile device center settings, I have tried all combinations, and it will not connect. (work computer has active sync, can explore as in my computer, but no file transfer, same issue different wording on the errors) I have tried a different, known good cable even! I have re-installed drivers in windows both with drivers from here, and ones for 64 bit amd processor, on 64 bit vista from the m.s. "help" center recomended for this problem, didnt do anything but install and tell me my device is ready.... it wasnt.... HELP it so seems like a setting!!!!
|
im having the same problem with vista business 32....
it worked fine until yesterday, and nothing has changed....also tried reinstalling...done everything but a hard reset on the mogul... i can sync over BT but it takes for ever... |
You guys might try unchecking (or rechecking) the "Enable advanced network functionality" under Start-->Settings-->Connections Tab-->USB to PC
That seems to cause a lot of the connection issues with ActiveSync or Windows Mobile Device Center. |
I tried all above, but what worked for me was deleting the partnership in activesync on the phone itself.
|
WMDC can be a little tricky. If you have sync issues look at this thread or PM me and i can help you personally.
http://forum.ppcgeeks.com/showthread...highlight=wmdc I have been working alot on this. I have several things you can do to try to fix this. When i get a chance i am going to clean up the info and post a new thread with troubleshooting info. #1, thing to try is inside Device Manager delete one USB device at a time and let it reinstall, this usually frees up the resource conflict allowing WMDC to sync. Quote:
|
I had the same issue and had to call sprint. They had me remove my activesync install and reinstall from Microsoft's website instead of the cd that came with the phone. I also had to uncheck the "Enable advanced network functionality" under Start-->Settings-->Connections Tab-->USB to PC. Hope this helps.
|
you know what i did and fixed it, Formated crappy vista. It seems like every time you format you fix one issue and mess up another.
|
Quote:
If you had contacted me i could have finished helping you out. I have several ways to fix this. |
i just restart both the phone and the pc and it has always worked
|
Unchecking advanced has always worked for me. I have issues at work because of the corporate firewall software. :)
|
For 3 months i battled connections failing during data transfers, buying a new usb cable, thought i had a defective usb connector in my phone until i found the uncheck the "Enable advanced network functionality" under Start-->Settings-->Connections Tab-->USB to PC in a forum read. It has repaired almost all of my connectivity issues (still get the occassional disconnect) but i would say this has been a 98% fix. Along with the 'My Mobiler' program connecting and transferring data is a breeze (sorry i dont have a link)
|
Ok, I have checked, unchecked and side checked the enable advanced net functionality tab, (finally left er' unchecked) Sigh, I have tried all usb ports, 3 cables, (one brand new, one known good) I have un installed all traces of handheld and usb ports, in Dm and let all mighty vista reinstall the "updated" software (read: Exact same software) I have uninstalled windows mobile remote adapter, and when vista downloaded the update (recomended update) it wouldn't let me install, says error 800F020B, I click the get help link to the help center, and like so many issues in life, the help center is really just a fueling station for Microsoft hatred! (vent, sorry) I am about at witrs end with this thing..... lol all i wanna do is yellow cube it and maybe some ROM hacks later on..... you think this is a built in anti-ppc-rape device>? Canospinich, I will PM for your help....
|
Quote:
quickly - the "800f020b" error is normal, this is Windows Installer telling you that a similiar product was just uninstalled. You can either give it a bit to clean up after itself or dump all your temp files and try to reboot. Some of the 3rd party apps/mods we do to these can absolutely impact USB connectivity. the biggist issue is the "advanced features" as this turns on NDIS networking which is causing more harm than good at the USB level. If you can, briefly tell us the steps you have taken to attempt connection. I know it may seem redundant, but i want to double check and see if anything was missed. i promise to clean up the info and post soon, Holidays have me swamped :-) |
ok, lets see....
first time it happened I was about to transfer the cabs for the yellow cube hack. I entered my windows password and checked my email, then I read up on the install here. I downloaded the zip files to my vista machine, and extracted them to their own folders. I then plugged in the USB cable to my mogul and it dinged.... only this time WMDC didn't auto open... no biggie I can surf to my mogul in "my computer", so I then click "my computer", then the icon for the phone. I alt-tab to the folder where the cab files are that I want to move onto the phone. I righy click, cut and alt-tab back to "my documents" on the phone, I attempt to paste, but get the "cannot transfer file xxxx. File may be corrupt or may not exist" error, I try to drag and drop, keyboard shortcuts, copy, and then try a different cab altogther, then a .jpg, then a .doc... all same error. Next I tried taking a pic from the phone and first cutting, then dragging and etc to the vista machine.... different error, says "Acess denied" I then tried soft boot / windows restart and different port. then I tried going into DM and removing the device and driver and letting windows reinstall.... same issues, then try someones step by step with a non signed device driver, same issue, I remove everything at this point, do restarts and let windows reinstall, same issues. Next I bought a new cable, same issues, daughters PSP cable, same issues. Next I went to windows moble site, and read, mostly babble, but found this issue, MS says to do all I have done + uninstall and reinstall WMDC and SYNC and reinstall newer version. did this, lost being able to see phone in "my computer" and now it acts like a typical USB device with the safely add/remove USB device in the systray..... next I took a day to curse microsoft (a local holiday) and then tried first third of canospinich's trouble shooting guide, up to basically everything I had already done, then I gave up as the urge to use my mogul as a frisbee became too great to bear. with in all of this I have tried every setting, having to do with anything, on the mogul, and also on the vista box.... dont remember most of what I have played with, but I did try each thing one at a time, tested problem, and put setting back...... same problems..... |
Oh and I forgot to mention IN my step by step... I also took my mogul to work on day 2 or 3 and hooked it up to work computer. It is an XP home machine. I knew before hand that I would need active sync, so I downloaded it and then hooked up the mogul... almost the identical issue.... the dialog boxes were worded differently, but the result the same... like a usb device in sys tray, and active sync wouldn't sync. Also files could not transfer off or onto the hand held, at that point is when I bought the new usb cable, at lunch, and tried and as previously mentioned above, had the same issue.
(also an afterthought:) Lastly the most recent change to my mogul, before it quit connecting, is a legit install, of pocket quicken. I am in the trial stage, but do like it so I intend to buy it at the end of the trial. I don't have quicken on any of my home or work machines, so in the wizard i told it not to sync quicken. I did try this option both checked and unchecked but I thought I would mention it as it was the last program I installed over USB. Other mods to phone, in order: Installed Google maps Did the sprintTv install from Nov. 28th post here, roughly Dec. 3rd or 4th. watched 2-3 times, (comedy central and discovery) it didn't work after Dec. 12th or so, I uninstalled it. Installed Microsoft live search. Did the steps to make full you tube / Google video sites play on Mogul and installed TCPMP (works flawlessly) Reg edit: battery life upgrade. (Cody's?) ( downloaded and used phm regEdit) Downloaded free ware "castle wolfenstein 3-d" (looked like it was designed for WM 03 maybe for I-paq, but it works ok. Installed VJCandlela (flashlight program) trimmed all but the Lite version out, and mapped it to the camera button. Quicken pocket 2.5 All of these were done one at a time, with a day or more in between installs, and lots of use with no errors, until it stopped, after the quicken install, last Monday. |
Quote:
Quote:
Please take your time and go through step by step. Let me know on the services and if you see it in Device Manager. Go ahead and unselect "Advanced Features" in the PPC in USB. |
Ok, I have gone through step by step, methodically, and am confused on the uninstall / reinstall of the WMDC. This isn't listed as a program, in add/remove programs (or whatever Vista calls it) The only method I can find at all is at the windows mobile site, I navigate to uninstall windows mobile device center, follow the steps for genuine check and the download begins, only the title of the program being downloaded changed, to Windows mobile device center DRIVERS???? I let if finish and it shows HTC USB Sync and related drivers being reinstalled.... when it was finished all was the same as before, I.E. connection to Mogul still available only through "my computer" and no file transfer at all..... Looking at the windows mobile site there is a reply in the troubleshooting re: this issue and it says with 64 Bit vista sometimes a second install makes it work, so I downloaded the installed again and it installed again (took forever) then all of a sudden, windows was installing USB drivers and other device drivers and WMDC opened out of nowhere, then hung, has been hung for 20+ minutes now, onto next steps, just in case.....
Uninstall what? regclean where? Next step, in services: RapiMgr & WcesComm in processes: WmdHost.exe & wmdc.exe they are set to auto start (delayed) BUT to PID 2632 not 3680???? (is this our issue?) also when I minimized I noticed WMDC is still hung along with the device driver dialoge box with the following info: Your Devices are Ready to Use. The software for this device has been sucessfully installed. HTC USB Sync Ready to use Windows mobile device Ready to use. Unidentified device Searching preconfigured driver folders..... I will copy to PM, close browser, and wait for un-hang, I know vista will usually unhang on its own.... |
Update: restarted, figured out WMDC uninstall / reinstall no change... :( I did get the procedure down to get WMDC to open, and say "connecting" but then "ERROR".....
When playing with the handheld itself, I noticed a few things that seem to go along with this issue..... leading me to believe the PPC itself is the issue, not vista (this goes along with the whole same issue on 2 PC's, 1 XP, 1 vista...) in the ppc, in file explorer, I cannot cut or copy and paste ANY file or folder..... it gives me a cannot transfer file, maybe not enough memory, (87.10mb free storage, 22.80mb free; program) or you may not have permissions (or something like that) this also goes along with the error I get when trying to transfer files off of the ppc in "my computer"...... sigh I am going to call sprint PDA tech support, see how much worse they can make it...... |
I Am Also watching this post for solution that Works.
Same issues as princelton Thx For Help |
Did you check in Device Manager that your "devices" are all ok and listed (USB devices in particular)?
|
Yes deleted usb & repluged. no joy there. ppc shows up in mycomuter. But will not sync. Installed & reinstalled all. also can not move or delete files.
ppc. 6700 just uncheck box usb, conections. 6800? |
after a million tests i can tell you this IS NOT A P.C. ISSUE, (95% sure) rather it is a PPC issue.... does ANYONE have any input as to "security" or "permissions" or "write protect" errors on the mogul? This issue seems to present itself while trying to transfer via USB, but after ALOT of other testing, the real issue seems to be that the mogul will not transfer ANY files, even cut/copy / paste files OR folders within the phone without even being USB connected!!!!! Can anyone with MW6 knowledge intervene? As stated above, we are 95% sure that this isn't a desktop issue, rather a mobile issue............
|
Well definitely PPC Issue!
If I plug in my hx4700 no problem xv6800 plug in get error Calling vzw today |
k, it's FIXED!!!!! Spent an hour on the phone with tech support. Turns out it DID need a hard reset to fix it, not the control panel way either, the ##782# or whatever (I was on the phone, not near my computer, did it on the fly....)
Anyhoo, IT's fixed!!!!!! |
Quote:
You, my friend, make my life easy. THANK YOU HAHA! |
You can also uninstall Windows Mobile Device Center and then reinstall it. This has always worked for me. My friend and I both have a Mogul and I've synced them both up to tether and what not, but one day, mine would no longer connect and his would. I did all of the junk from unchecking the advanced networking for usb, hard reset the device, etc nothing worked. Uninstalled WMDC and put it back on, everything worked great.
|
Re: CANNOT connect to mogul through USB and PC?????
I was looking for help with sync with Mogul (I know it is an old phone but still working, well was) the screen has went out and I can't see but before I replace I want to make sure to backup my contacts. I don't think I have sync the contact in the phone and I am trying to reconnect it. I have a Window 7 computer and the partnership was working. Now when I connect it does not recognize the USB connection, first problem, then I can see to change anything on the phone. In one of your post you suggested (You guys might try unchecking (or rechecking) the "Enable advanced network functionality" under Start-->Settings-->Connections Tab-->USB to PC. That seems to cause a lot of the connection issues with ActiveSync or Windows Mobile Device Center.)
Since I can get into the menu on the phone is there anything else you can think of? Thank you also once I get the contacts back in activesync I hope to sync into another phone. Then get something new. Don't want a Win7 or Crackberry, maybe another HTC but has to have a keyboard |
All times are GMT -4. The time now is 06:14 PM. |
Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com