PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Imagio (http://forum.ppcgeeks.com/forumdisplay.php?f=120)
-   -   How to flash Energy Max Sense onto Imagio (http://forum.ppcgeeks.com/showthread.php?t=139170)

dhstandard22 01-04-2011 02:09 AM

How to flash Energy Max Sense onto Imagio
 
I have already unlocked my device with the HArd Spl and downloaded the MAx Sense UI ROm from his post http://forum.ppcgeeks.com/imagio-dev...se-2019-a.html

BUT I have no Idea what to do next. Please Help

demonntl 01-04-2011 09:40 AM

Re: How to flash Energy Max Sense onto Imagio
 
2 ways to flash the room
1) install mobile device center (win7) or active syncs (XP) sys your phone and run the room u downloaded
2) copy the WHITIMG.nbh from the room files to your phone card. Turn off your phone. Hold end key and volume down then follow the screen.

dhstandard22 01-04-2011 09:20 PM

Re: How to flash Energy Max Sense onto Imagio
 
Quote:

Originally Posted by demonntl (Post 2029618)
2 ways to flash the room
1) install mobile device center (win7) or active syncs (XP) sys your phone and run the room u downloaded
2) copy the WHITIMG.nbh from the room files to your phone card. Turn off your phone. Hold end key and volume down then follow the screen.

One I downloaded the Rom and used Winrar to view everything but I don;'t know what to run. Also I can now see the WHITIMG.nbh in Winrar but am unsure how to copy it since there is no control C option or copy....

demonntl 01-04-2011 09:41 PM

Re: How to flash Energy Max Sense onto Imagio
 
extract the Rar file by right click on this file/ extract here
then u will have the normal file to copy, remember, Hard SPL first

dhstandard22 01-04-2011 10:14 PM

Re: How to flash Energy Max Sense onto Imagio
 
Quote:

Originally Posted by demonntl (Post 2030077)
extract the Rar file by right click on this file/ extract here
then u will have the normal file to copy, remember, Hard SPL first

It says I don't have enough memory....guess I just have to delete stuff

jadesse 01-05-2011 06:01 PM

Re: How to flash Energy Max Sense onto Imagio
 
Quote:

Originally Posted by dhstandard22 (Post 2030104)
It says I don't have enough memory....guess I just have to delete stuff

What do you mean that you don't have enough memory? Which method are you trying to use to update?

If you are using the SD card method then you need to have a blank SD card that is 2 Gigs or less formatted for FAT32.

1. Put that card in you card reader & copy the WHITIMG.nbh file to it.

2.Once it has finished copying then put that SD car back into your phone.

3. Enter the phone's bootloader. Instructions:
  1. Power down the phone.
  2. While holding down the VOLUME DOWN button, Power the phone back on.
  3. Continue holding the VOLUME DOWN button until the TRI-Colored screen shows up. At that time, release the button.
4. Follow the instructions.

Activesync/WMDC

1. Connect phone to computer via the USB cable & let your phone connect.

2. Run the "Imagio_SoftwareUpgrade.exe" file.

3. Follow the on screen instruction to update.

Note: DO NOT DISCONNECT YOUR PHONE DURING THE PROCESS.


All times are GMT -4. The time now is 09:52 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0