[GUIDE] How to change the Sprint banner using CDMA workshop
 

What to change the Sprint banner to something else?


Well here is how.

This is a rough guide, maybe I'll get ambitious and spruce it up when I have some more time...

Install HTC Sync if you haven't already..
Get it here.
http://www.htc.com/www/SupportViewNe...33&news_id=631

Gonna need the HTC Diag drivers, least I did... these work fine:
http://rapidshare.com/files/29352942...AG_Drivers.zip - 32bit (x86)

Go download CDMA workshop from somewhere, not the demo version.

Enter DIAG mode, dial ##diag# which is (##3424#), let windows install the drivers...most likely it won't find the HTC DIAG drivers, but they are in the link above... get it installed.

Now in CDMA workshop, you really don't want to be effin' with stuff you aren't sure what it is... but we are here to change the banner right? riight so don't be changing anything else and you'll be a-ok.

Select your port, hit connect, hit read... goto the NAM tab...hit Read ...change the Banner from "Sprint" to whatever..hit "Write".... then you can reboot the phone and its done.

To find your port...

http://i49.tinypic.com/25fu7nq.png

Select your port, hit connect then hit read. ( picture shows "Disconnect" only because I already pushed connect... )

http://i48.tinypic.com/16hk8w5.png

Goto the NAM tab, hit read, change the banner, hit write. Reboot your phone

http://i47.tinypic.com/11gn67a.png


Enjoy!
http://i49.tinypic.com/2vdh9om.png


Mods if there is a problem with me posting the link to isohunt, I'll gladly remove it.

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Just did it. Thanks.

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

those diag drivers don't work on x64

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

removed by apristel... these didnt work.

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

no dice :(

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

removed by apristel

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

edited post #6 and OP.. added 64bit drivers.

try those.

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

didn't work either :(

It appears as though it's a "WModem" driver.

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

ok thanks, I'll search more. Wish i had x64 to test.

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

thanks for trying man

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Worked flawlessly! Thanks!

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

hey folks, cant find the full version CDMA workshop only the trial version,a little help please.

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Your instructions worked perfectly for me, thanks apristel! Also, anyone with Windows 7 x64, I found the correct HTC and Diag drivers, which I uploaded to my site here.

http://rainfreak.com/images/other/lockscreen.jpg

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Worked for me aswell

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Where do you get a registered version of this? $99? Is that what your paying?

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Bump for full version info

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

I've had the full version of CDMA Workshop for a year or so now. And yes, the latest version does cost $99.

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Likeee a Gloveeee!! that worked!!! thanks

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Does this make *2 not work?

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

can you please share these again ?? thanks rainfreak :)

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

yup. when i dial *2 my dialer force closes, even after i changed it back to Sprint

i get this feature does not support current system version....i am running a custom rom tho.

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

*2 works fine for me.

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Thanks givine to Apristel for this Thread and to Rainfreak for posting those x64 Drivers. =D>

As for u, im jus goin by wut ive read a number of times but have you or whoever made that rom Removed the "SprintPromotions.apk"? ...that seems to be the leading cause for ur issue

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Here is a link to win 64 drivers. Hope this helps.

http://www.techwerkz.com/evo/HTCDiagDrivers.zip

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

ive been trying this for like an hour with zero luck... :banghead: where do i install the drivers ??? PLease help. ive already got htc sync and cdma workshop !!!

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

read this it has to best instructions
http://forum.xda-developers.com/showthread.php?t=697487

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Before I shell out $99, I will stick with the screen I got, considering how often I see it!!!

Re: [GUIDE] How to change the Sprint banner using CDMA workshop
 

Thanks brother !! took me a min but i finally got it !! :D