![]() |
I think I found a charging bug, please try yours and report back
When I leave the phone charging all night and the ring is still "breathing" in the morning. Even though the battery shows 100%, the LED ring continues to breathe and the device stays warm.
What applications do you have installed, if any? Mine used to turn solid white when it's done, but not anymore. I installed VistaHideBattery and No2Chem's power cpl, as well as a battery icon plug-in. I may try uninstalling one at a time to see if things change. Another interesting observation: If I charge via a PC's USB, the ring stays solid when it's complete charging. I usually have "charge via USB" turned off. Edit: This is what I just discovered: If you go to Settings/System/Power, and check "When device is turned on, do not charge when plugged into PC", then the phone will keep charging even when full (via wall charger). If you uncheck that box (default setting), the phone will stop charging when full (via wall charger). Conversely, if that box is checked, the phone keeps charging endlessly when using a wall charger. Please try yours and report back. Thanks. |
Re: I think I found a charging bug, please try yours and report back
Its not charging endlessly its just using the Wired power to keep the device running. so that the battery stays at 100% until unplugged.
it would cause a fire if it were still charging the battery once full. and i would be burning in my sleep each night. granted the device gets hot but they all do when connected to usb/charger. the LED error your reporting could just be a visual error where its not cycling the LED to solid on full charge. |
Re: I think I found a charging bug, please try yours and report back
Quote:
How do you account for the facts I presented above, that using a wall charger, and option selected, the ring continues to breathe at 100%. At the same time, when the option is deselected, the ring stays on at 100%? Also the battery stays warm while the ring glows on and off, I suspect that it is in low charge. I can also prove this by looking at No2Chem's Power Panel. It's showing around 150+ mA. For Li-Ion batteries, there is high rate charge, low rate charge, and trickle charge. High rate will take the battery to ~80%, low rate takes it the rest of the way. It is trickle that maintains the charge. What you describe is trickle charge, which does not appreciably warm up the battery, and would be at a pulsed/intermittent rate. This would not be a constant 150 mA. So no, it is not a "visual error". With the option checked, the battery is subject to a constant low rate charge even at 100%. And no, that will not cause a fire. It just reduces the battery's ability to hold charge over time. |
Re: I think I found a charging bug, please try yours and report back
Quote:
im going ot charge up my device and see what it says for charging current at 100% then im going to disable the usb charge option like you have test and then ill post back. |
Re: I think I found a charging bug, please try yours and report back
I have had no problems ... I plug it in at night the display "breaths" while charging ... in the morning the ring is solid, unless I have an email or text message then the ring is in alert mode and flashes until I clear them. but does turn to a steady light at 100%
|
Re: I think I found a charging bug, please try yours and report back
Quote:
|
Re: I think I found a charging bug, please try yours and report back
Quote:
Make sure the option is unchecked, and use a wall charger (not via PC/USB). |
Re: I think I found a charging bug, please try yours and report back
Quote:
Thanks. |
Re: I think I found a charging bug, please try yours and report back
Battery 100% charge current goes between 42mA and 124mA seems to be a trickle charging to me.... Light is pulsing.
so i "checked" disable usb charging when device is on and now charging back to 100% to see what the light does. then i will uncheck it and test again. |
Re: I think I found a charging bug, please try yours and report back
Quote:
When the option is "checked", and using the wall charger, at 100%, the light should continue to pulse. Thanks for trying this out. |
All times are GMT -4. The time now is 12:04 AM. |
Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com