My Apache Stuck Boot only show "SERIAL" v2.02
 

Hi i uptadate Utstarcom ROM and my Apache stuck on screen show me Serial v2.02, i re-update roms but still stuck on Serial. how i can fix this please?

If you have activesync on the computer that you are trying to flash from try this uncheck usb from activesync file/connection settings/ allow usb connections

I had this same problem when I started to use Vista. You are pretty much stuck in a boot loader mode! Make sure you are not using a Vista based PC, use WinXP PC and turn off Active Sync. When you connect the USB cable the Serial will change to USB V. 1.02 or something. Then once you have that you should be able to restart your ROM install and get ur device running.

search for stuck in bootloader. mtty can help and so can the universal file in the thread.
~mike

Anytime I was ever stuck in bootloader mode, which there have been several times, I just pull the battery out for a little, pop it back in, and turn it on, and it goes back to normal :)

Or you can try this.

For thoose who stuck in bootloader this is how to unstuck:

1. Get Mtty here:
http://rapidshare.com/files/28321691/mtty1.42.zip.html
2. Right Click Activesync icon in tray, and select connection setting, then un-mark Allow USB connections at Activesync Connection settings.
3. Extract the zip file and Run mtty.exe and select USB from the Port dropdows list and then click OK button.
4. press Enter two times for showin USB>
5. Type:
set 14 0
[ENTER]
task 8
[ENTER]
(for soft-reset).
6. Ur device should reset and u might close mtty utility.
7. Done.

ur device should be just fine... if not try to re-flash the OS again while in Bootloader (press and hold POWER+RECORD button then press RESET)

re-enable/re-mark Activesync after this proccess might necesarry, to allow USB Connection again for enablin Activesync ur pda with ur PC.



This is posted by the man Hemli_c himself over @ xda-developers...

For a walkthough with screenshots go here: http://forum.xda-developers.com/showthread.php?t=304408

Cheers!

Mikee

Ty guys now is working again. and yes i was update my apache using VISTA base pc :( so i never do this again :P