PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Apache Development (http://forum.ppcgeeks.com/forumdisplay.php?f=53)
-   -   6700 Install WM6/Blank Screen Nothing Reboots (http://forum.ppcgeeks.com/showthread.php?t=17344)

neoice 02-01-2008 08:10 AM
6700 Install WM6/Blank Screen Nothing Reboots
 
I think i may have posted in the Wrong Forum thread earlier and if i did i apologize. so here goes

Just updated to WM6 and after installing i followed the prompts for the Hard Reset. Did That and it asked me to Either Hit Y for Factory Defaults or N to Continue, i have tried Both Ways , When i Hit N nothing Happens and takes me to the Blank Screen Where at that top it says SERIAL and on the Bottom it Says v2.02 and just sits there.

If i hit Y for Factory Default it says hit space to continue, do that and takes back to the Same screen and nothing happens. Any Suggestions? or Anything i can do?


used the VZW_WM6_CE_5.2.1908_B7

XV6700

Man i hope i havent Done something wrong

neoice 02-01-2008 09:44 AM
fixed was stuck at bootloader can delete post

spetrillo 02-01-2008 01:15 PM
Quote:
Originally Posted by neoice (Post 173864)
I think i may have posted in the Wrong Forum thread earlier and if i did i apologize. so here goes

Just updated to WM6 and after installing i followed the prompts for the Hard Reset. Did That and it asked me to Either Hit Y for Factory Defaults or N to Continue, i have tried Both Ways , When i Hit N nothing Happens and takes me to the Blank Screen Where at that top it says SERIAL and on the Bottom it Says v2.02 and just sits there.

If i hit Y for Factory Default it says hit space to continue, do that and takes back to the Same screen and nothing happens. Any Suggestions? or Anything i can do?


used the VZW_WM6_CE_5.2.1908_B7

XV6700

Man i hope i havent Done something wrong
If it says serial it means that you have not connected your phone via the USB cable.

What I would suggest is to re-flash your device. You are not using Helmi's kitchen, so I would abandon the ROM you are using and build your own with Helmi's kitchen.

Read Ga Medic's guide on how to use the kitchen. If you have questions please do not hesitate to PM me. I am here to help, as well as all of us.

Steve

tednelson83 04-06-2008 08:35 AM
Re: 6700 Install WM6/Blank Screen Nothing Reboots
 
i am having the same problem. what i am doing to (hopefully) fix it is reflash it to the factory sprint rom, and than im gonna try the 6.1 kitchen again, ill let you know if it works. if not than i will be back here for help!

tednelson83 04-06-2008 09:26 AM
Re: 6700 Install WM6/Blank Screen Nothing Reboots
 
this new kitchen just does not seem to be likeing me. i cannot seem to make it work, any tips?
i did have the 6.0 on there before.

jnjn 04-06-2008 11:28 AM
Re: 6700 Install WM6/Blank Screen Nothing Reboots
 
try to remove something (some oem selections in the kitchen), cook and flash again.
i've found that if it's toooo full, it may has this problem (no boot, black/white screen, etc).

AllanonX 04-06-2008 04:00 PM
Re: 6700 Install WM6/Blank Screen Nothing Reboots
 
I too am stuck at the HTC boot screen.

VSeven 04-17-2008 11:00 AM
Re: 6700 Install WM6/Blank Screen Nothing Reboots
 
Quote:
Originally Posted by AllanonX (Post 242348)
I too am stuck at the HTC boot screen.
Ditto, tried multiple different combinations. Using Verison 6700 2.05 boot. Gonna try to go back to 6.0 which worked great.


All times are GMT -4. The time now is 11:53 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0