ActiveSync 4.5 problem - need expert!
 

I have since some years a Qtek 9100 with WM 5 and ActiveSync 4.5 and ii has been working fine for years. Recently I had to make a hard reset and now I can not reinstall ActiveSync 4.5.
From the beginning the my PC recogniced the PPC (via USB) but said something was wrong with the handheld. The USB port seemed blocled but after connecting to another USB post at least the same thing happened again. By now, nothing happens when I connect the phone to the USB port.

I have tried all tips I can find:
- In Norton 2009 I have created a rule allowing all programs (exe-files) in the AvticeSync folder.
The rule also opens ports 990 999 5678 5721 266675 and 5679 as mentioned in a Microsoft ActiveSync 4.2 troubleshoot document.
- I have stopped the firewall, spamfilter, virus control and connected without success
A couple of strange things are that:
-I cannot (on the phone) see "Connect with USB" (or sonthing like it) at Start-Settings-Connection
- the option Start-ActiveSync-Menu-Options (options are greyed out)

So please, anyone that can resolve this, I am missing meetings forgetting to drive my kids to practice...

Re: ActiveSync 4.5 problem - need expert!
 

Toggle the Advanced Networking setting for your USB connection (Under Settings, Connections) to the opposite of what it is now and try again...

Re: ActiveSync 4.5 problem - need expert!
 

Well, that might be the problem: I do not find any USB connection under Settings, Connections. The icons I can see (transleted from Swedish):
-a general Connections icon (to add modem connections etc.)
- Bluetooth
- CSD linetype
- GPRS settings
- (configure) Network card
- wireless network
- Transfer wireless

Should there be a USB Connection icon? If so, how can I find it? Should I trY another hard reset?

Thanks for your help so far.

Re: ActiveSync 4.5 problem - need expert!
 

Okay, I just realized you are running WM5, not WM6, so ignore what I said at first...

You might have another program conflicting... I used to have Palm Hotsync installed, and always had to remember to disable the program I wasn't using as they would conflict... If you have any other programs that sync with USB devices, make sure they are disabled...

Next, delete any existing relationships the PC side ActiveSync might have...

Try a different USB cord... Sometimes they go bad...

You might need to uninstall ActiveSync from the PC, reboot, then reinstall...

Good Luck...

Re: ActiveSync 4.5 problem - need expert!
 

Thansk agian for taking your time:
No,I do not have any more sync.

I can unfortunately not delete any existing relationships on the PC side of ActiveSync, probably because I can not install ActiveSync on the telephone due to the lack of sync. (the option File-Mobiel device is greyed).

I belive the cable is okay as I menaged to connect at least partly to the PC some days ago.

I have reinstalled ActiveSync twice.

UHhhh........

Re: ActiveSync 4.5 problem - need expert!
 

Hmmm... Okay, on the PC, in Activesync, Connection Settings, is "Allow USB connections" checked?

Re: ActiveSync 4.5 problem - need expert!
 

Yes it is.

Re: ActiveSync 4.5 problem - need expert!
 

Hmm, I'm starting to run out of ideas... Lets try this:

With the phone plugged into the computer, Rught click on My Computer, Click on Manage, select Device Manager from the Left Pane, scroll to the bottom of the Right Pane...

Do you have something called Windows CE USB Devices in the list? If you do, do youi have something called Microsoft USB Sync inside of it (when you expand it?) Does it show an error condition when you double click on it?

You might want to check the files under Event Viewer (in the Left Pane) for the time you plug in the phone to see if any errors are coming up in the logs...

Re: ActiveSync 4.5 problem - need expert!
 

Sorry for the late answer, I failed sending off my answer.
No, I do not have a Windows CE USB Devices in the list.

Connecting the phone makes the following error show under Network Cards: Windows Mobile-based device #(the number increading for every connection).
The staus shows "Can't start unit (Code 10)"
Troubleshooting says reinstall but the error comes back.

Re: ActiveSync 4.5 problem - need expert!
 

Okay, now we are making progress... Do you know if your phone came with a CD or a floppy with drivers on it? Seems like the problem is that Windows itself can't recognize the phone, so ActiveSync is not the issue...

Re: ActiveSync 4.5 problem - need expert!
 

I can't get USB to Active Sync 4.5 (WinXP/SP3, WinMo6.1).
Hotsync can sync the palm on the same port.
It doesn't get far enough to get a real error message,
just an error bubble that it doesn't understand the device?

Hotsync was exited before connecting the phone.
I reinstalled the hardware drivers from the laptop
builder, and reinstalled Active Sync 4.5.

It used to work and now it doesn't?
Am I missing a driver, and if so,
where do I look for it? ](*,)

Thanks




Alltel Touch Pro OEM ROM.

I attached a screen cap of the bubble message.

Re: ActiveSync 4.5 problem - need expert!
 

remove hotsync unless you have a Palm device
remove ActiveSync

go into device manager (click START>RUN type in DEVMGMT.MSC and click OK or press ENTER)

Make sure you don't have a USB keyboard or mouse, remove each USB device listed under UNIVERSAL SERIAL BUS CONTROLLERS

Reboot your computer, let it find and automatically install all the USB drivers, then try to sync again

Re: ActiveSync 4.5 problem - need expert!
 

It found some of the onboard devices (root hubs, fingerprint sensor, not webcam tho,
or printer support). I reinstalled active sync 4.5 it said it updated USB drivers.
rebooted. after attaching a bus powered hdd it found it correctly. I did a cold reset
on the phone and then tried to connect it. still got the USB bubble error message.

*sigh*

Re: ActiveSync 4.5 problem - need expert!
 

I tried restoring a checkpoint from before the problem happened incase some
registry key was corrupted or deleted. no luck there either. I'm at a loss as to what's
wrong, so no idea how to fix it.

Re: ActiveSync 4.5 problem - need expert!
 

Another thing you can try is to remove the MicroSD card from your phone and try it again.

Re: ActiveSync 4.5 problem - need expert!
 

Verizon, (my new carrier, since the merger), agreed to an advanced replacement.
I get a VZW phone though not a new Alltel :(. Do you know what comes in their
OEM package (apps and such). Alltel puts Jetcet 5 in their's and it works well with my
networked printer. I know I lose the extra ram :(.

Do I have to rebuild my environment, or can I just have it do its customizations
and then restore my SPB backup?

Thanks