[Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

I felt the need to restructure my old Sashimi thread.

This guide will help you setup your user customization as automated as possible. This guide uses Sashimi with several methods to backup your contacts such as google sync and/or outlook with active sync with a combination of reg keys and program files backup and restored using the UC stage (User Customization) found in most custom roms during setup to launch sashimi and push our user customizations.

This is a collection of my work as well as many others from the PPCGeeks Community.

Table of Contents
Post 1 - Getting Started and Sashimi Info
Post 2 - Contacts/Calender Backup methods
Post 3 - Windows Mobile 6.5 & 6.5.x backup settings
Post 4 - Manila 2.1 (Touchflo) & 2.5 (Sense) backup settings
Post 5 - Titanium backup settings
Post 6 - Device Specific backup settings
Post 7 - Application Specific backup settings
Post 8 - Application Specific continued.

BIG THANKS TO:
sstrunks (LuckySe7en)
studentjunk
D\/8
rootlinux
rstoyguy
Zone23
LordFuzzy024
dylan927us
lilflip2
Askwhy
Scoob
rawdikrik
fwt
nhvoltagenh
lovingHDTV
digi
gmaine02
christian.a
liriel
twe90kid
glenwill
CovKid66

This section will guide you through setting up the foundation for auto customization.

Basic Know How

How to copy a file using Total Commander
If your custom rom does not have Total Commander you can download the cab here http://www.ghisler.com/pocketpc.htm

From Total Commander right select the file you want to copy, then go to the File Menu > Copy/Move > Tree > Select where you want to copy of the file to go to (Example: Storage Card > Sashimi > Auto > Root) > Copy

[insert video]

How to back up a registry key using Total Commander
From the Root directory listed in Total Commander you should see a folder at the top labeled \\Plugins (if you dont press ".." button in the upper right cornor till you go back to Root)

To access your phone's registry go to \\Plugins > registry > HKCR, HKCU or HKLM

[insert video]

Setup Sashimi
This video (click the video below) walks you through the basics of Sashmi How to setup it up the first time. To download Sashmi please visit the home of Sashimi http://www.winmo-experts.com/

Sashimi Note:
You don't have to re-install Sashimi after a flash, just run SASHIMI.exe from the \bin directory and SASHIMI will detect and perform a clean install and reconfigure itself.

http://yourhaxer.com/files/guidesashimi/basic.png

Understand the Sashimi Auto Structure
This video (click the video below) demonstrates how to use the Root folder of SASHIMI to copy files and folders using the Auto method of Sashimi.

http://yourhaxer.com/files/guidesashimi/root.png

Using UC Stage to push Sashimi
Most custom ROM have a User Customization stage after the main setup of their Rom. We can use this stage to launch Sashimi.

To do this:

Step 1. Copy SDConfig.txt to the root directory of your Storage Card.
Step 2. Copy MortScript-4.2-UCSASHIMI.cab to \Storage Card\SASHIMI\PROGRAM\UCINIT\
Step 3. Extract security.zip then copy security.xml to \Storage Card\SASHIMI\PROGRAM\UCINIT\. Then Copy the SASHIMI.INK to \Storage Card\SASHIMI\Program\Bin\

Done.
BIG Thanks to studentjunk & D\/8 for this setup.

AUTO INSTALL TO ALTERNATE STORAGE LOCATION (ASL) by studentjunk

In addition to the \SC directory, SASHIMI also provides one additional Alternate Storage Location (ASL). To have CAB files install to an ASL in Auto mode, do the following:

• Place the CABs in \SASHIMI\Auto\CAB\ASL (or a directory called \ASL under an alternate CAB location).
• Configure theAlternate Storage Location in Settings > Advanced Settings with the name of the alternate storage (e.g. "My Storage").

Any cabs in the ASL directory (and subdirectories) will get auto-installed to the defined Alternate Location.

PROBLEMS WITH SC and ASL INSTALLS

The Auto Install to SC and ASL process depend upon SASHIMI being able to properly interpret the onscreen text in order to send automated screen taps.
Storage Card and ASL installs will be disabled if either of the following is true:

1. An unsupported language is detected. For more information see SUPPORTED LANGUAGES.
2. An unsupported resolution is detected.

SASHIMI will issue a warning at run-time if either of these scenarios are detected. An event will also be logged to the system log when Auto Install to Storage Card is disabled.

NOTE 1: It is recommended not to touch the screen or use other applications while SASHIMI is installing and this is especially important during this phase.
NOTE 2: Not all applications will work with automated installs (either to main memory or storage card). If a CAB file requires additional user interaction, it is generally better suited to install during the Manual Phase. In addition, some 3rd party applications which take control of the device's display may interfere with the Auto Install to Storage Card processes (e.g. screen shot or other capture software).

Re: [Guide] Murducky's Guide to Auto User Customization
 

This section will guide you through how to sync your contact & calender through various ways.

Pim Backup Method
If you do not use Outlook, Google, or Groupwise, the simplest way to back up both your contacts and calender events is to copy the pim.vol from the root directory of your phone to your storage card. After a flash, simply copy the backed up pim.vol from your sd card back to the root directory of the device (overwrite the current pim.vol).

Important Note: this has to been done manually as you can not push the pim.vol using sashimi as sashimi does not copy back files back to the root directory of the phone.

Google Sync Method
Google Sync allows you to setup a Microsoft exchange sync to Google as if its an exchange server. You can push other contacts and calenders from other systems to your Google account and then have your phone sync to Google.

First off you should have a gmail account. If you do not you can get one at http://mail.google.com.

Setup the Google Sync
Link to Google's instructions - http://www.google.com/support/mobile...36&topic=14299

Important Note: Make sure that you have backed up any Contacts and Calendars from your phone to your computer before proceeding. Just use the PIM method above.

Important Note: There is a bug when you sync your contacts using Google Sync, they will be displayed lastname first, instead of first name first. Google is aware of this and should be fixing it soon. Till then there is an application Contact_changer_v1.3.cab that will fix it for you. The other down side is every time you sync it will change it back.

This is how I use Google sync after a flash.
[coming soon]

[Insert Video SOON]
Setup Google Sync on Device

1. Open the Active Sync application on your device's home screen.
2. Click Set up your device to sync with it.
3. Enter in your gmail email username@gmail.com
4. Enter m.google.com as the server address.
5. Ensure that the SSL option is selected.

Sign In to Your Google Account

6. Click Next.
7. Enter your full Google Account email address as the User name.
8. Enter your Google Account password as the Password.
9. Leave the Domain field empty. If your device requires you to enter a domain name, enter google.
10. Click Next.
11. Check Contacts, Calendar, or Email, depending on which you'd like to sync. (Tasks is not supported and will lead to an error if checked.)
12. Click Finish.
13. Press the Sync softkey on the left to synchronize.

Pictures


Windows Mobile/ActiveSync/Outlook Sync Method

PCs running Windows Vista

If your PC is running Windows Vista, your synchronization settings will be managed through the Windows Mobile Device Center.

• Windows Mobile Device Center information and downloads

PCs running Windows XP or earlier

If your PC is running Windows XP, or earlier, your synchronization settings will be managed through Microsoft ActiveSync.

• New! Microsoft ActiveSync 4.5—information and downloads
• ActiveSync—Troubleshooting Guide (for ActiveSync versions 4.0, 4.1, and 4.2)
• ActiveSync—FAQ (for Windows Mobile 5.0 touch screen phones)
• ActiveSync—FAQ for Smartphones

Synchronize your data with WMDC

Synchronizing lets you transfer e-mail, contacts, appointments, tasks, Web favorites, and media files from your computer to your device or from your device to your computer. You must accept an update to Windows Mobile Device Center (WMDC) on your computer before you can use WMDC to synchronize your device with your computer or with a Microsoft Exchange Server.

http://www.microsoft.com/library/med...anager-new.png

Step 1
Plug your device into your computer by using the USB cable or cradle.
The Windows Mobile Device Center Home screen appears on your computer.
Step 2
On your computer, click Set up your device.
Step 3
Select the check box next to each information type you want to synchronize, and then click Next.
Step 4
To synchronize with an Exchange Server, enter server information provided by a network administrator, and then click Next. Otherwise, click Skip.
Step 5
Enter the Device name and then clear the check box if you do not want a shortcut for WMDC created on your desktop.
Step 6
Click Set up. WMDC synchronizes the selected information types.

Microsoft MyPhone Method

Download and install the My Phone software

On your desktop or laptop computer, go to http://myphone.microsoft.com and sign in to the service. You need a Windows Live ID to sign in. This sign-in information is the same user name and password you use if you use Windows Live Messenger. If you don't have a Windows Live ID, you can quickly set one up.

After you sign in to the My Phone service, pick up your Windows phone and open Internet Explorer Mobile. Go to http://mobile.microsoft.com/myphone/en-us. When the web page loads on your phone, you'll see an option to download and install the My Phone software. Select the link, and download the software.

When the software is downloaded (it should only take 60 seconds, at most), it automatically starts the installation. If you have a storage card in your smartphone, the software will ask where you want to install the software—to the device or to the card. Install it to the device. If you don't have a storage card, it won't ask this question; it will just install the app.

After the installation is completed, an icon for Microsoft My Phone appears in your list of programs. Select it, and open the software. A handful of screens explain how the service works: One is a license agreement that you have to accept to use the service, and the final step is to enter your Windows Live ID information.
http://www.microsoft.com/library/med...ccess/sbs3.png
When you've completed these steps, you should see a message that says the software is signing in and configuring the service.

Configure My Phone
Next, you’ll configure the My Phone software on your phone. Fortunately, the one-step process is easy: You just choose automatic or manual synchronization. If you have an unlimited data plan on your smartphone, you should select Automatic. If you have a limited data plan but still want to use My Phone, select Manual, and run it when you want to. Select Next after you've chosen automatic or manual.If you have your smartphone connected to a Microsoft Exchange server, My Phone does not back up your contacts, calendar, and tasks because these items are already backed up in your Exchange account. You'll see a message like the one below, and My Phone will back up the other data items on your phone. If you don't have an Exchange server account, My Phone backs up your calendar, contacts, tasks, and everything else (text messages, photos, and other files).
http://www.microsoft.com/library/med...ccess/sbs5.pnghttp://www.microsoft.com/library/med...ccess/sbs6.png

At the end of the process, select Finish, and the synchronization starts. Depending on the amount of data that your phone has to synchronize, this process can take from minutes to hours. You may want to connect your smartphone to power during this process if it has a lot of data to be uploaded to the My Phone service and if the battery isn’t fully charged.
http://www.microsoft.com/library/med...ccess/sbs7.png

After the initial synchronization, you'll rarely have to open the software on your smartphone again. The exception is if you want to sync the contents of your storage card—to do that, look under Menu > Options. If you wish, you can also change when the scheduled automatic sync occurs (Menu > Schedule). By default, it will sync daily, but you can change it to run weekly or manually.

Your final step is to go back to your desktop or laptop PC, browse to http://myphone.microsoft.com, and confirm that all of your data is there. Assuming that the synchronization is completed on the phone, it should be. And that's it, you're done!
http://www.microsoft.com/library/med...ccess/sbs8.jpg

Groupwise Sync Method

[Coming Soon]

Re: [Guide] Murducky's Guide to Auto User Customization
 

Owner Info
Key HKEY_CURRENT_USER\ControlPanel\Owner

Or make a cab...
Download SDConfig.Builder.v0.7.85.PE from http://forum.xda-developers.com/showthread.php?t=390846

Run SDConfig Builder.exe, go to the 5 tab (Owner Info), type in your Owner Info. Save to xml file. Then go to 4 tab (Cab & Copy).

Browse for the xml you just made for Source XML, set an output directory. then click make cab. Now you have a owner cab you can push with Sashimi put owner cab in Storage Card\SASHIMI\Auto\Cabs\

Device Name
HKLM\Ident

Backlight
HKCU/control panel/backlight
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Power\Timeouts

Alarm Settings
HKLM\Software\Microsoft\Clock

Splash Screen (EnergyROM Specific)
\Windows\welcomehead.192.png

Startup Sound (EnergyROM Specific)
\Windows\PowerOn.wav copy
\Windows\PowerOff.wav copy

Voicemail Number (when you added your password to it)

• Set your password
• HKEY_CURRENT_USER\Software\Microsoft\Vmail\ UserProvidedNumber1

Email Accounts & WIFI Settings
You will create an XML file and save it to Storage Card\SASHIMI\Auto\XML using Sashimi/Makisu Built program. Watch the How To Here: http://www.youtube.com/watch?v=ANgzC...B817D8&index=0

Ring Tones
Using the Auto\Root folder Sashimi create the same folder structure to copy over your ring tones.

• Ring tones go in \My Documents\My Ringtones
• Text msg/Notification tones go in \Windows
• Sliding Sounds go in \Windows as .wav

Ex. Storage Card\SASHIMI\Auto\Root\My Documents\My Ringtones

so here is the run down about ringtones...before you back up these registries make sure you set them how you like first.


Ring Tone Settings
Easy Way
Use a program called KeepMyTonesV1.6.cab Setup all your ringtones and contact ringtones.

Use KeepMyTones to generate two xml files for you.

Save Ringtonebackup.xml & NotificationBackup.xml to your XML folder in SASHIMI

http://downloads.egenesis2.com/KeepM...inFormV1.1.jpg

Save Contact RingTone Screen:
http://downloads.egenesis2.com/KeepM...gTonesV1.1.jpg

Save Sounds & Notification Screen:
http://downloads.egenesis2.com/KeepM...ationsV1.1.jpg


HARD WAY
First set the Ring Tone then back up HKCU\ControlPanel\Sounds\Ringtone0 is where your ringtone registry is, for some reason there is two entries that reference my ringtone file, RingTone0 and RingTone2. I exported both in Storage Card\SASHIMI\Auto\REG

*ALERTS AND NOTIFICATIONS*
In HKCU\ControlPanel\Notifications\ there are a bunch of registries for all your alerts, they are all labeled in gibberish like this "{0CD9B91C-BEA7-446d-9857-BD2F1E6BFE80}" You have to use regedit and look at the first value, the first value should contain data that tells you what tone that registry entry is for. If the first value is blank don't back it up, there are more entries than there are alerts so you dont need to back up the blank ones. There is exactly 22 entries you need to export and back up to Sashimi. It was a PITA (Pain in the ***) to go through them and export them one by one, but you get done eventually.
All Registry exports should go into Storage Card\SASHIMI\Auto\REG

Sliding Sound
First set the Sliding sound you want then back up the reg key \HKLM\Software\HTC\SlidingSound export to Storage Card\SASHIMI\Auto\REG

All incoming beams off (Start>Settings>Connections>Beams) (thanks rstoyguy)
Quote:
HKLM\Software\Microsoft\OBEX
obexservicemask = 3 ; checked
obexservicemask = 2 ; unchecked

Bluetooth Devices (thanks to Zone23)
I found that if you backup registry key HKLM\Software\Microsoft\Bluetooth\Devices on restore it will restore all bluetooth devices. The only catch is I have not figured out how to get bluetooth headsets to work. All computer connections will work, so it’s a start. So at least so far I only have to repair my car and headset. All 3 computers work fine.

Current power plan (thanks to Zone23)
back up reg key HKLM\System\CurrentControlSet\Control\Power\Timeou ts export to Storage Card\SASHIMI\Auto\REG
Turn on your Bluetooth (thanks to Zone23)
Back up reg key HKCU\Software\Microsoft\Bluetooth\Settings"ScanMod e"=dword:00000005

Contact Ringtones
Use a program called KeepMyTones download here: http://forum.xda-developers.com/showthread.php?t=540755

How to: (thanks to LordFuzzy024)
There are three simple steps to save your contact ringtones.
1. Install the program
2. Set all your ringtones if you haven’t already.
3. Click File/Save Contact Ringtones. You’re done.

There are also three simple steps for restoring your contact ringtones.
1. Install the program if it’s not already.
2. Make sure all your ringtones are located in the previous locations. (Usually My Documents\My Ringtones, or where ever you store them, it must be the same as before.) and your RingtoneBackup.xml file is located in your install directory.
3. Click File/Restore Contact Ringtones. You’re Done.

The backup file is located in your install directory and it will notify you of that location upon saving.

Re: [Guide] Murducky's Guide to Auto User Customization
 

SENSE 2.5 Settings

Enable the animations on the home screen (lovingHDTV)
[HKEY_CURRENT_USER\Software\HTC\Manila]
"CachedBackgroundPath"=""
"HomeBackgroundPath"=""

Home Screen Quick Links (christian.a)
HKLM\Software\HTC\Manila\Home

Fav Contact Tab (liriel)
Fav contacts are automatically restored with Manila 2.5 when you sync with Outlook (Created as a category "Favorite").

Another, option with more functionality is to use this program (Back FavPeople Tab): http://forum.xda-developers.com/showthread.php?t=543605

Tab order (twe90kid)
(works the same as Manilla2.1) - HKLM/software/HTC/Manilla/Configuration

Facebook and Twitter Login for Sense (glenwill)
[HKEY_CURRENT_USER\Software\HTC\People\OwnerInfo]
"FBBirthdayFromFB"=dword:00000000
"FBPhotoFromFB"=dword:00000001
"FBAutoUpdate"=dword:00000001

[HKEY_CURRENT_USER\Software\HTC\Manila]
"Facebook.Account"="who@server.com"
"Facebook.IsLogin"=dword:00000001
"PeopleBrowserSource"=dword:00000001
"PeopleAllViewSource"=dword:00000001
"Data.AutoDownloadOff"=dword:00000000

[HKEY_CURRENT_USER\Software\HTC\TwitterApp]
"IsDownloadWhenRoaming"=dword:00000001
"IsCheckTweetAuto"=dword:00000001
"dwAutoCheckTweetsPeriod"=dword:0000003c

[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HTCAccountManager]
"FacebookUserName"="xxxxx"
"FacebookAccount"="who@server.com"
"FacebookSession"="xxxxx"
"FacebookUserID"="1372835011"
"FacebookSecret"="xxxxx"
"TwitterTokenSecret"="xxxxx"
"TwitterToken"="xxxxx"
"TwitterUsername"="xxxxxx"
"TwitterPassword"="XXXXXXXX"
"TwitterAccount"="who@server.com"
"FacebookToken"=""
"FacebookSavePassword"=dword:00000001

HTC Stocks tab (CovKid66)
You'll need to backup two files for this one...
ygoservice.db and ygoservice_sr.db
and both are stored in \Application Data\HTC\YGo

Sense 2.1 Settings

Tab order (twe90kid)
(works the same as Manilla2.1) - HKLM/software/HTC/Manilla/Configuration

HTC Stocks tab (CovKid66)
You'll need to backup two files for this one...
ygoservice.db and ygoservice_sr.db
and both are stored in \Application Data\HTC\YGo

Touch Flo/Manila 2.1
Manila/TouchFlo3d Fav Contacts Tab**
If you are using TouchFlo3d and want to save your favorite contacts that information is stored in the pim.vol file located in your root directory, just back that up. pim.vol also contains all of your contacts! No need to use pim backup app unless you want to save all ur txt messages, recent calls list, etc.

My Contact Card (thanks to dylan927us)
backup reg key HKEY_CURRENT_USER\Software\HTC\People\OwnerInfo export to Storage Card\SASHIMI\Auto\REG

Stock market Tab (thanks to lilflip2)
Backup: "\\Application Data\HTC\ygo" I copied whole folder but (2 files ygoservice.db and ygoservice_sr.db) copy to Storage Card\SASHIMI\Auto\Root\ Application Data\HTC\

Save order of Tabs (thanks to Zone23
backup reg key HKEY_LOCAL_MACHINE\Software\HTC\Manila\Configurati on export to Storage Card\SASHIMI\Auto\REG

Manila Weather (Thanks to Askwhy)
To backup your weather settings you need to save a regfile to SASHIMI\Auto\REG with some of the data from --

[HKEY_CURRENT_USER\Software\HTC\Manila]

In particular, you need to backup 'Weather.CityList' but I would also include:

'Weather.ServerURLOverride'
'Locale'
'Weather_Focus'
'Weather.Fahrenheit'
'Weather.PostFirstRun'

After running SASHIMI you will have any pre-cooked-in locations removed and overwritten with your own -- and you will only need to hit 'Update'. For instance my file looks like this:

[HKEY_CURRENT_USER\Software\HTC\Manila]


"Weather.CityList"="NAM|US|CO|FORT COLLINS,NAM|US|DC|WASHINGTON,NAM|US|NY|NEW YORK"
"Weather.ServerURLOverride"="http://weather.not2advanced.com/htcweather/forecastdata.php?ac=XDADevs&locCode=%25ls&version= 1&device=innovation"
"Locale"="en-US"
"Weather_Focus"="United States"
"Weather.Fahrenheit"=dword:00000001
"Weather.PostFirstRun"=dword:00000001

Not sure if all the chefs have ROMs with the same weather server URL cooked-in, the one above is simply the one that was already in my registry when I went to back it up. I had no idea previously that a special weather patch server tied to the community was even being used to make things happen.

If you have added a custom city using a database editor of some sort, you will also want to backup the manila file (database file) that you edited, and that file is called 2330fc3c_manila -- place that file in \SASHIMI\Auto\Root\Windows\ to have it restored automatically.

Program Tab (thanks to Scoob)
Back up reg key HKLM\Software\HTC\Manila\ProgramLauncher export to Storage Card\SASHIMI\Auto\REG

Re: [Guide] Murducky's Guide to Auto User Customization
 

Titanium
Setup Titanium the way you like it first before backing up the items below.


Titanium layout

• First you have to back up HKLM\Software\Microsoft\CHome reg entry so it will keep your titanium layout.
• You also need to back up the two .cpr files located in \Windows: Titanium_480x640.cpr and Titanium_640x480.cpr and copy them to Storage Card\SASHIMI\Auto\Root\Windows

Set Titanium as Default | TouchFlow as Disabled

• Check Windows Default and uncheck Touchflow in Today
• Back up Reg Key \HKLM\Software\Today\Windows Default export to Storage Card\SASHIMI\Auto\REG
• Back up Reg Key\HKLM\Software\Today\Touch Flo export to Storage Card\SASHIMI\Auto\REG

ATCONTACTS (fave people)
backup reg keys HKLM\Software\Microsoft\CHome\ATFavePeople are all the registry entries that you need to save those settings, I didn't know what to back up so I backed up all of them, they all look important anyways.

Also will want to back up \Application Data\ATContacts and copy to Storage Card\SASHIMI\Auto\Root\Application Data\ATContacts which saves image files.

*Note*

• Restore your contacts before launch the "fave people".
• ON First Run after restore - you will have an overlay on your first contact on fave people - make sure you have restored your contacts then just go to the favorite person settings and click okay.. it will fix the overlay

Titanium Weather
Backup key \HKLM\Software\TitaniumWeather export to Storage Card\SASHIMI\Auto\REG

Re: [Guide] Murducky's Guide to Auto User Customization
 

Touch Pro

Camera Settings
[HKEY_CURRENT_USER\Software\HTC\Camera]
[HKEY_LOCAL_MACHINE\Software\HTC\Camera]

Touch Pro II

Camera Settings
[HKEY_CURRENT_USER\Software\HTC\Camera]
[HKEY_LOCAL_MACHINE\Software\HTC\Camera]

Re: [Guide] Murducky's Guide to Auto User Customization
 

BIG THANKS TO nhvoltagenh for the majority of this list.

Arcsoft MMS Settings
backup reg key \HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1 export to Storage Card\SASHIMI\Auto\REG

Alpha Pocket Journal
[HKEY_CURRENT_USER\Software\Alpha Realms]

AVRCP
[HKEY_LOCAL_MACHINE\Software\Wolf\Tools]

cleanRAM
[HKEY_CURRENT_USER\Software\HTCAddicts\cleanRAM]

Facebook IM (fim)
backup reg key HKCU\Software\mosko.mobi\fim export to Storage Card\SASHIMI\Auto\REG
Garmin
Complete Garmin folder from
Root\Garmin

GoogleMaps
Program files\googlemaps folder

G-Weather
[HKEY_CURRENT_USER\Software\ageye\G-Weather]

HTC Task Manager
backup reg key HKEY_CURRENT_USER\Software\HTC\TaskManager export to Storage Card\SASHIMI\Auto\REG

iContacts
\Root\Program Files\iContact AE\
Themes (folder)
cfg.dat
settings.ini
settings_qvga.ini
settings_vga.ini

IM+
[HKEY_LOCAL_MACHINE\Software\Apps\Shape Services IM+ Settings]
\Root\Program Files\IMPlus\
resourcelib.dll
SETTINGS.IM
Setup.dll

Lumos
\Root\Program Files\Lumos\
SETTINGS.TXT

Lumos (thanks to rawdikrik)
Run the Lumos configuration program (just like you always would) then copy the "settings.txt" to "sashimi\auto\root\program files\lumus" you will need to create all these folders or figure out some way to copy them. Anything in the root folder copies to whatever folder on your device. Sashimi will create the folders if they don't exist, but typically it installs all the apps first. After an auto install I don't have to do anything with lumos (nice). You can do the same thing with ringers just make a mirror of what directory in "root" and Sashimi will copy them for you when you run it.

Microsoft My Phone
[HKEY_LOCAL_MACHINE\Software\Microsoft\My Phone\Publish\Services]

MobilePad
[HKEY_CURRENT_USER\Software\MobilePad]

Nitrogen
\Root\Program Files\Nitrogen\
SKINS (folder)
CONFIG.DAT
KEYS.DAT
PLAYLIST.NPL
PRESET.EQL
SETUP.DLL

Opera 9.5
Bookmarks are located \Windows\Opera9\Opera6.adr

Opera 9.7
Bookmarks are located \Windows\Opera9\Profiles\Opera6.adr

Opera 10
program files\Opera mobile 10\profile\datastorage

PALRINGO Settings
HKCU/Software/Parlingo/settings (backup and export the whole settings folder)

phoneAlarm
[HKEY_CURRENT_USER\Software\pocketMax\phoneAlarm]
\Root\Program Files\phoneAlarm\
Each Theme Folder Desired
Matching Theme.skn
pa_Export.txt
phoneAlarm.log
phoneAlarm_User.cfg

Resco Explorer
HKLM\Software\Resco\Explorer
HKLM\Software\Resco\Shell
HKLM\Software\Resco\Registry

S2U2
[HKEY_CURRENT_USER\Software\A_C\S2U2]

SK tools
[HKEY_CURRENT_USER\Software\SK\tools]

Spb Wallet 2.0
[HKEY_CLASSES_ROOT\CLSID\{A79D1B0D-2F6A-4E7E-AF94-5EEBC8BFD684}]

SPB Wireless (thanks to fwt)
Settings: (registry)
HKEY_LOCAL_MACHINE\Software\Spb Software House\Spb Wireless Monitor (and all Keys included)
Registration: (registry)
HKEY_CLASSES_ROOT\CLSID\{DD9B73F6-9EED-4ED0-84CF-422AF83512DB}
Data: (files)
"\Application Data\SPB Wireless Monitor

S2U2 2.10
\Root\Program Files\S2U2
GFX (folder)
lang.ini
s2u2 Settings.log
s2u2 Settings.reg
s2u2c.log

SmartPhone Tracker
Setup all your settings, back up file, Program Files\SmartPhoneTracker/settings.config copy to Storage Card\SASHIMI\Auto\Root\Program Files\SmartPhoneTracker

TouchResponse
[HKEY_CURRENT_USER\Software\Snailslug\TouchResponse]

TrackMe
\Root\Program Files\TrackMe
CONFIG.DAT
LOCAL.SDF
LOCAL.TMP
SysWin.dll
SysWinID.dll

ThumbCal
[HKEY_CURRENT_USER\Software\ThumbApps\ThumbCal]
\Root\Program Files\ThumbCal
SETTINGS.INI

Twitter (PockeTwit)
Backup file \Program Files\PockeTwit\app.CONFIG copy to Storage Card\SASHIMI\Auto\Root\Program Files\PockeTwit\
(You will have to create the path in your Auto\Root Folder)

WhereIs
\Root\Program Files\Where is
Settings.dat

Re: [Guide] Murducky's Guide to Auto User Customization
 

Coming Soon

Re: [Guide] Murducky's Guide to Auto User Customization
 

Wirelessly posted (AdrianH85(TP2): Opera/9.5(Microsoft Windows; PPC; Opera Mobi/16643; U; en) HTC_Touch_Pro2)

can wait until this is done! so i can stop doing everything manually

Re: [Guide] Murducky's Guide to Auto User Customization
 

bump!

Re: [Guide] Murducky's Guide to Auto User Customization
 

FINALLY UPDATED! Just a few more how to videos to make and post but besides that she is ready!

Re: [Guide] Murducky's Guide to Auto User Customization
 

Very nice indeed! Here are some more 3rd party app keys I use:

SKTools5
Registration:
HKEY_CURRENT_USER\Software\sk\tools
"startup"=dword:nnnnnnnn [your your registration code here]

SKTracker
Registration:
HKEY_CURRENT_USER\Software\sk\tracker
"info" key
Settings (rules):
HKEY_CURRENT_USER\Software\sk\tracker
"rules" key

Spb News 2.0
Registration:
HKEY_CLASSES_ROOT\CLSID\{0A2D78B4-60D1-459D-AB3F-4D871E313E4A}
"ADODB"="your registration code here"
Settings:
HKEY_CURRENT_USER\Software\Spb Software House\Spb News

Spb Insight (version prior to Spb News 2.0)
Registration:
HKEY_CLASSES_ROOT\CLSID\{0A2D78B4-60D1-459D-AB3F-4D871E313E4A}
"ADODB"="your registration code here"

Spb Wallet 2.0
Registration:
HKEY_CLASSES_ROOT\CLSID\{A79D1B0D-2F6A-4E7E-AF94-5EEBC8BFD684}
"2_SIPFlag2"="your registration code here"

Spb Mobile Shell 3
Registration:
HKEY_CLASSES_ROOT\CLSID\{B8D93F90-8931-43BB-AA6D-0F0AE84A6200}
"SIPFlag2"="your registration code here"

SprintDB Pro 4.0
Registration:
HKEY_CURRENT_USER\Software\Kaione\SprintDB Pro\Config
"RegistrationCode40"="your registration code here"

ZenyeeStayUnlock
HKEY_CURRENT_USER\Software\Zenyee\Stay Unlock
Although I use Zenyee to stop my Exchange lock policy, I do want my device to lock....jsut not as often as the company would like ;) Therefore this sets my lock to 1 hour...
"TimeLimit"=dword:0000003C

Handyshopper
Settings:
HKEY_CURRENT_USER\Software\HandyShopper

Hearts (sorry, still one of my favourite 'old' card games)
Settings, including player name:
HKEY_CURRENT_USER\Software\Microsoft\Hearts

PocketUNO
Settings:
HKEY_CURRENT_USER\Software\OrangxaProgramaro\Pocke tUno

Miscellanous stuff:

HTC Stocks tab
You'll need to backup two files for this one...
ygoservice.db and ygoservice_sr.db
and both are stored in \Application Data\HTC\YGo

Screen Text Size
HKEY_LOCAL_MACHINE\ControlPanel\Stylus\192DPI
"CurFont"=dword:value

Values are from smallest font to largest:
600, 700, 800, 1000, 1100


Then I found these at xda...to finish off the spb products:

Spb Backup
HKCR\CLSID\{7B9996D8-B043-4013-98B5-FC12829C28D6}
"ColorHash"=

Spb Diary
HKCR\CLSID\{5C368402-C6DF-4065-AD14-5C0D3209BA1F}
"SIPFlag2"=

Spb Finance
HKCR\CLSID\{2900F885-E124-4588-9851-AECACB9C7CED}
"Today"=

Spb GPRS Monitor
HKCR\CLSID\{734DE2D0-334A-BC47-EA22-437AC5057413}
"SIPFlag"=

Spb Imageer
HKCR\CLSID\{08D92C6C-BB17-46E4-A471-59C0FB352D43}
"System32Bin"=

Spb Phone Suite
HKCR\CLSID\{6F42EAB1-6707-4273-93C6-BC3B7DA34726}
"WM 5.0"=

Spb Pocket Plus
HKCR\CLSID\{0B9E877C-7ECA-4790-9BE3-EE1F2566BEF8}
"APISet"=

Spb Time
HKCR\CLSID\{EA5192FA-1A6A-4100-90A2-D478B4314867}
"WinCE"=

Spb Traveler
HKCR\CLSID\{7D562A74-A69B-45F5-8D1F-20DABDCE2C76}
"ADODB"=

Spb Weather
HKCR\CLSID\{7A767275-A2FA-4AB2-A77A-F9819F8681B0}
"SMART"=

Re: [Guide] Murducky's Guide to Auto User Customization
 

Some more....

Manila 2.1 specific:

Turn on automatic weather updates:
HKEY_CURRENT_USER\Software\HTC\Manila
"Data.AutoDownloadOff"=dword:00000000

Turn on automatic stock updates:
HKEY_CURRENT_USER\Software\HTC\Manila
"StockData.AutoDownloadOff"=dword:00000000


Other:

Turn off ResProxy (pre-caching of your applications (More Info):
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ResProxy
"ShareMemSize"=dword:00000000


Sounds & Notifications (TP2 specific):

Turn on "Events" checkbox:
HKEY_CURRENT_USER\ControlPanel\Volume
"Mute"=dword:00000007

ActiveSync: Begin sync
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D658-239C-47a7-9304-0D347F580408}

ActiveSync: End sync
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D659-239C-47a7-9304-0D347F580408}

Connection established
HKEY_CURRENT_USER\ControlPanel\Notifications\{8ddf 46e7-56ed-4750-9e58-afc6ce486d03}

Connection disconnected
HKEY_CURRENT_USER\ControlPanel\Notifications\{8ddf 46e8-56ed-4750-9e58-afc6ce486d03}

Messaging: New e-mail message
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65A-239C-47a7-9304-0D347F580408}

Messaging: New text message
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65B-239C-47a7-9304-0D347F580408}

Phone: Missed call
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D660-239C-47a7-9304-0D347F580408}

Phone: Voice mail
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D661-239C-47a7-9304-0D347F580408}

RSS Hub: New Items Received
HKEY_CURRENT_USER\ControlPanel\Notifications\{695F 6B37-EE99-489b-982D-F9A46A944ED1}

QuickGPS
HKEY_CURRENT_USER\ControlPanel\Notifications\{85ee 47b2-57d7-EEFE-8e7a-36480443d084}

Reminders
HKEY_CURRENT_USER\ControlPanel\Notifications\{15F1 1F90-8A5F-454c-89FC-BA9B7AAB0CAD}

Re: [Guide] Murducky's Guide to Auto User Customization
 

WIDCOMM bluetooth (works on TP2. If these do not exist it may because of the ROM you are using):

HKLM\SOFTWARE\WIDCOMM\BTConfig\Devices
HKLM\SOFTWARE\WIDCOMM\Connections

Restores headsets, as well as PC/laptop connections, etc. I've tried these, and managed to restore my headset, plus my ActiveSync and FileTransfer BT to my laptop :D Thanks to mrmediaguy.

And you can backup/restore your BT discoverable device name using this one:

HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM\BTConfig\Gener al
"DeviceName"="device_name_here"

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Awesome thread you're building here, tons of useful info too, thx!

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Just a quick question.

When I run the auto phase and it copies all my data in the root folder, does Sashimi overwrite say something in the Windows directory if there is already the same file?

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

No, it overwrites without a problem. I use it to change my phoneon/phoneoff sounds. It may put something in the log file, but I never checked.

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

+1 Big THANKS from me too!

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Has sashimi been updated. Lately UC won't finish after flashing some of the newer sys like 25007 or 23541. Should I use the new updated scripts you have on first post

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Thanks for this great thread, this deserves a bump!

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

just saw this thread... didn't know you would credit me for some small things. THANKS BRO

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

great job op!

How do I get my bookmarks from Opera 10 into a .cab or .reg or .xml or anything.

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

I use BsB Tweaks to turn on default system menus, is there a reg key for this I can back up?

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

adding to this...

that's not rom problem, it's pimbackup problem

here's details on how to restore perfectly.

for those who use pimbackup, here's a reminder before you flash

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Does anybody know where Skyfire keeps its username/password stored?

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Hey guys, I can't get my .auto files to work

Here's what I have for my Bing auto file:

[AutoFile]
InstallLocation=0
WindowTitle="Confirmation"

[ScriptCommands]
1=SendCR

My Bing.cab is located in Sashimi's auto\cab directory and the .auto file is in the same place and named the exact same thing (i.e. Bing.auto)... But when Sashimi gets to Bing, it just hangs for a second and doesn't decide where to install it to, so it just aborts and skips installation of Bing

Any Ideas? Free 5 points to your rep if you help answer :thumbleft:

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

What does your log file show? Any errors?. Make sure the Advanced Settings has the diagnositic logging on.

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

UPDATE: I think I may have solved the problem... Apparently a file was missing from one of the Sashimi folders. I reformatted my SD Card, reinstalled Sashimi from scratch, and then ran the program with the .auto files and it worked perfectly! Big thanks, studentjunk


Here is my last log:

04/06/10,19:11:35,SASHIMI 8.0 Initialized. Command line parameter: AUTORUN
04/06/10,19:11:36,Security Policy 0000101a changed. Original Value: 1 New Value:1
04/06/10,19:11:37,Security Policy 00001001 changed. Original Value: 1 New Value:1
04/06/10,19:11:38,Security Policy 00001005 changed. Original Value: 222 New Value:222
04/06/10,19:11:39,Security Policy 00001017 changed. Original Value: 180 New Value:16
04/06/10,19:11:39,Settings file loaded. VALUE: \Storage Card\SASHIMI\Program\INI\settings.ini
04/06/10,19:11:40,Settings.ini directory does not exist. VALUE: ManualCabPath=\My Storage\SASHIMI\Manual\CAB
04/06/10,19:11:40,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Manual\CAB
04/06/10,19:11:41,Settings.ini directory does not exist. VALUE: ManualRegPath=\My Storage\SASHIMI\Manual\REG
04/06/10,19:11:42,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Manual\REG
04/06/10,19:11:42,Settings.ini directory does not exist. VALUE: ManualXMLPath=\My Storage\SASHIMI\Manual\XML
04/06/10,19:11:43,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Manual\XML
04/06/10,19:11:43,Settings.ini directory does not exist. VALUE: ManualRootPath=\My Storage\SASHIMI\Manual\Root
04/06/10,19:11:43,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Manual\Root
04/06/10,19:11:43,Settings.ini directory does not exist. VALUE: ManualCERTPath=\My Storage\SASHIMI\Manual\CERT
04/06/10,19:11:44,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Manual\CERT
04/06/10,19:11:44,Settings.ini directory does not exist. VALUE: ManualEXEPath=\My Storage\SASHIMI\Manual\EXE
04/06/10,19:11:44,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Manual\EXE
04/06/10,19:11:44,Settings.ini directory does not exist. VALUE: ManualMSCRPath=\My Storage\SASHIMI\Manual\Scripts
04/06/10,19:11:44,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Manual\Scripts
04/06/10,19:11:44,Settings.ini directory does not exist. VALUE: AutoCabPath=\My Storage\SASHIMI\Auto\CAB
04/06/10,19:11:44,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Auto\CAB
04/06/10,19:11:44,Settings.ini directory does not exist. VALUE: AutoRegPath=\My Storage\SASHIMI\Auto\REG
04/06/10,19:11:45,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Auto\REG
04/06/10,19:11:46,Settings.ini directory does not exist. VALUE: AutoXMLPath=\My Storage\SASHIMI\Auto\XML
04/06/10,19:11:46,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Auto\XML
04/06/10,19:11:46,Settings.ini directory does not exist. VALUE: AutoRootPath=\My Storage\SASHIMI\Auto\Root
04/06/10,19:11:46,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Auto\Root
04/06/10,19:11:46,Settings.ini directory does not exist. VALUE: AutoCERTPath=\My Storage\SASHIMI\Auto\CERT
04/06/10,19:11:46,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Auto\CERT
04/06/10,19:11:47,Settings.ini directory does not exist. VALUE: AutoEXEPath=\My Storage\SASHIMI\Auto\EXE
04/06/10,19:11:47,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Auto\EXE
04/06/10,19:11:47,Settings.ini directory does not exist. VALUE: AutoMSCRPath=\My Storage\SASHIMI\Auto\Scripts
04/06/10,19:11:47,Located equivalent path in external storage. VALUE: Storage Card\SASHIMI\Auto\Scripts
04/06/10,19:11:49,Settings.ini entry added. VALUE: AlternateStorageLocation=
04/06/10,19:11:50,Settings file processed. VALUE: \Storage Card\SASHIMI\Program\INI\settings.ini
04/06/10,19:11:50,System Language Detected. VALUE:English-1033
04/06/10,19:11:50,Supported resolution detected. Value: 480x800x36864
04/06/10,19:11:50,Storage Card detected. VALUE: Storage Card
04/06/10,19:11:51,Alternate Storage Location. VALUE:
04/06/10,19:11:51,SASHIMI First Run detected.
04/06/10,19:11:53,Shortcuts created in \Windows\Start Menu\Programs
04/06/10,19:11:53,SASHIMI Setup Completed.
04/06/10,19:11:54,Idler script initiated. Idle timeouts will be prevented while SASHIMI is active.
04/06/10,19:12:35,Auto Phase Initiated
04/06/10,19:12:36,Automated Interaction (AUTO) file found for Bing5. VALUE: Bing5.auto
04/06/10,19:12:47,Auto CAB AUTO install tmpAutpMSCR file not found. Cancelling Install. VALUE: Storage Card\SASHIMI\Auto\CAB\Bing5.cab
04/06/10,19:12:49,Tandem Files skipped due to install errors. VALUE: Storage Card\SASHIMI\Auto\CAB\Bing5.cab
04/06/10,19:12:53,Auto Phase Complete
04/06/10,19:12:53,SASHIMI Install Completed.
04/06/10,19:13:04,Autorun registry flag set
04/06/10,19:13:07,Idler script terminated. Idle timeouts will resume normally.
04/06/10,19:13:08,Reset Initialized.
04/06/10,19:13:08,SASHIMI Exited.


That part in Bold above is where I'm stuck :scratch: (Problem Solved - See top of this post)

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Ok, I found the solution to the problem from my post above (edited the above post with the solution). Thanks for the help

One last thing: Does anyone have a cab for the newer version of skyfire that doesn't present the splash screen after install? It makes Sashimi hang until I manually click the "done" in the right softkey so it holds up the entire automated process. If nobody has a cab to get past this screen, does anyone know how to get around this with an .auto file or some other trick??

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Does anybody know how to save the opera shortcuts on sense 2.5 tab ?

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Not sure, but try to back up this Reg: HKLM/SOFTWARE/HTC/Manila/InternetPush/Enabled inside you will see keys starting with 000, 001, 002, etc. look in there and give it a shot let me know if it works I have not tried yet.

Edit: I backed up key: Enabled, as described above, and deleted my shortcuts, then installed reg and soft reset, and shortcuts are back. so it is CONFIRMED

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

If by 'shortcuts' you mean the little thumbnail pics on the internet tab, your solution is posted here:

http://forum.ppcgeeks.com/showthread.php?t=114962

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Does anyone know what I can back up so my device settings can carry over in slingmobile? I have tried the setting.ini under program, but it doesn't seem to work. Any other ideas?

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

I don't use slingmobile, but I have a few ideas to find them. They could be stored in the registry. So make a full registry backup with sashimi, make some setting changes, and then make another full registry backup with sashimi. Then use windiff to compare the registry files. There will be some settings that always change. But if your program settings are in the registry, you will find a difference. You can also use total commander or another good file explorer to sort the directories according to date. The recently changed files will be on the top. Check the program file directories and windows directories.

Re: [Guide] Murducky's Guide to Auto User Customization (SASHIMI)
 

Hey wondering if anyone can help me with some settings. I would to add these things to my Sashimi:
1. Turn off vibration/haptic feedback in HTC Sense option
2. Turn off the keypad tones in dialer
3. Under Network "Mode of Operation" set "CDMA only"

If anyone can help that would be great, I don't know if these options go in to a reg file or xml so if you could help me with that too, would be awesome.