PPCGeeks
Page 5 of 33 « First 34 5 6715 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA Treo Pro Development (http://forum.ppcgeeks.com/forumdisplay.php?f=102)
-   -   +++RaiderROM! WM 6.5.3 [04/27/2011] (http://forum.ppcgeeks.com/showthread.php?t=118751)

raiderfan247365 06-19-2010 11:03 AM
Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:
Originally Posted by manekineko (Post 1824160)
Just tried a custom ROM for the first time on my Treo Pro. It seems like after I installed it the Sprint data connection doesn't work anymore. I flashed back to stock and data worked fine. Flashed to Raider again, and data doesn't work again. Is there something I have to do to get data working?

You just gotta install THIS .cab file after flashing, it was posted on the first page :) maybe i should make a reference to it for you newbies!! You can also always set up a sprint connect by going in to start/settings/connections/connections -> "add a new modem connection" -> name connection "Power Vision" and select "Cellular Line" -> enter "#777" as the number -> leave "username", "password", and "domain" fields blank!
I figured i would post the steps as you might need them in your ROM flashing ventures! Good Luck

manekineko 06-19-2010 11:42 AM
Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:
Originally Posted by skeegcpp (Post 1817163)
go into the task mgr, close out the camera program. then re-launch it. it will work properly, after that
I ran into that problem on mine too that the camera button wasn't working, and it turns out that under Settings -> Personal -> Buttons, the camera button is mapped to bring up the camera app only on long press of the button, and not normal press. Changing that fixed it for me.

manekineko 06-19-2010 11:44 AM
Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:
Originally Posted by raiderfan247365 (Post 1824564)
You just gotta install THIS .cab file after flashing, it was posted on the first page :) maybe i should make a reference to it for you newbies!! You can also always set up a sprint connect by going in to start/settings/connections/connections -> "add a new modem connection" -> name connection "Power Vision" and select "Cellular Line" -> enter "#777" as the number -> leave "username", "password", and "domain" fields blank!
I figured i would post the steps as you might need them in your ROM flashing ventures! Good Luck
Oh thanks a lot on that. I had thought I might be missing something like that, but in your first post instructions, it said that "Sprint crap removed" was available as an attachment, so I'd figured all the attachments with Sprint in their name were the Sprint crap. :mrgreen:

raiderfan247365 06-19-2010 12:07 PM
Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:
Originally Posted by manekineko (Post 1824602)
Oh thanks a lot on that. I had thought I might be missing something like that, but in your first post instructions, it said that "Sprint crap removed" was available as an attachment, so I'd figured all the attachments with Sprint in their name were the Sprint crap. :mrgreen:
you are correct lol SPRINT CRAP has customization .cab left out... Let me know how the ROM treats you

skeegcpp 06-19-2010 04:27 PM
Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
1 Attachment(s)
Quote:
Originally Posted by manekineko (Post 1824598)
I ran into that problem on mine too that the camera button wasn't working, and it turns out that under Settings -> Personal -> Buttons, the camera button is mapped to bring up the camera app only on long press of the button, and not normal press. Changing that fixed it for me.
thx for the fyi, with that being said, i attached the "push side button" cab. it will allow u to assign a program by jus pushing the side button instead of holding it....for example, my push side button assignment launches e-natives...holding it launches the camera

raiderfan247365 06-19-2010 05:21 PM
Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:
Originally Posted by skeegcpp (Post 1824950)
thx for the fyi, with that being said, i attached the "push side button" cab. it will allow u to assign a program by jus pushing the side button instead of holding it....for example, my push side button assignment launches e-natives...holding it launches the camera
push side button should be in the ROM...

skeegcpp 06-19-2010 09:06 PM
Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:
Originally Posted by raiderfan247365 (Post 1825008)
push side button should be in the ROM...
lol...it prolly is.
i jus attached cuz the OP gave me the idea

manekineko 06-21-2010 04:59 PM
Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:
Originally Posted by raiderfan247365 (Post 1824631)
you are correct lol SPRINT CRAP has customization .cab left out... Let me know how the ROM treats you
It's really working well for me so far. I'm using it with SPB Mobile Shell and everything is smooth.

Haven't seen any crashes yet, either, which is surprising for a Windows Mobile device. I assume eventually I'll see a random crash every now and again though, given this is Windows. Is that probably accurate to assume?

raiderfan247365 06-21-2010 06:12 PM
Re: +++RaiderROM! WM 6.5.3 23569 [6/013/2010]
 
Quote:
Originally Posted by manekineko (Post 1828332)
It's really working well for me so far. I'm using it with SPB Mobile Shell and everything is smooth.

Haven't seen any crashes yet, either, which is surprising for a Windows Mobile device. I assume eventually I'll see a random crash every now and again though, given this is Windows. Is that probably accurate to assume?
glad its goin good for you!
and yes lockups are generally a part of winmo life (especially when using 6.1 native kernels with 6.5 systems) but a good rom should keep them to nothing more than minor annoyance.

raiderfan247365 06-22-2010 06:55 PM
Re: +++RaiderROM! WM 6.5.3 23569 [6/022/2010]
 
updated 128DPI, big update. Gosh I need a job hahaha


All times are GMT -4. The time now is 07:50 PM.
Page 5 of 33 « First 34 5 6715 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0