PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA Treo Pro Development (http://forum.ppcgeeks.com/forumdisplay.php?f=102)
-   -   +++RaiderROM! WM 6.5.3 [04/27/2011] (http://forum.ppcgeeks.com/showthread.php?t=118751)

FrankStevens87 05-09-2011 08:14 AM

Re: +++RaiderROM! WM 6.5.3 [04/27/2011]
 
Raider:

Will do. Thanks again for an awesome ROM!

FrankStevens87 05-10-2011 08:32 AM

Re: +++RaiderROM! WM 6.5.3 [04/27/2011]
 
Quote:

Originally Posted by raiderfan247365 (Post 2099148)
Damn. I hate that damn ring bug...Install the sprint ringer cab around here somewhere. Ill update ROM tomorrow with fix

Raider:

Just an FYI, tried several Treo ringer fixes from this site and from palm without success.

Also, is the voice command not in the 128dpi rom?


Thanks,

- Frank

raiderfan247365 05-10-2011 11:40 AM

Re: +++RaiderROM! WM 6.5.3 [04/27/2011]
 
Quote:

Originally Posted by FrankStevens87 (Post 2099575)
Raider:

Just an FYI, tried several Treo ringer fixes from this site and from palm without success.

Also, is the voice command not in the 128dpi rom?


Thanks,

- Frank

Updated 128 DPI ROM. VC should be there and your phone should ring as well!

FrankStevens87 05-10-2011 02:00 PM

Re: +++RaiderROM! WM 6.5.3 [04/27/2011]
 
Will try it out and report back.


Thanks again for all your work!

-Frank

FrankStevens87 05-12-2011 10:43 AM

Re: +++RaiderROM! WM 6.5.3 [04/27/2011]
 
Quote:

Originally Posted by raiderfan247365 (Post 2099617)
Updated 128 DPI ROM. VC should be there and your phone should ring as well!

Raider, here's what I've found:

I flash the rom following the directions on the front page. When I install the ROM, the phone rings no problem. The next step is to install provisioning for the internet (Sprint_WWE_CustomizationV1.14.0.CAB). After I install the cab file (from the front page of this post) the phone no longer rings or vibrates. All other sounds and alerts work.

I tried then running the treo ringer fix cab, but the phone still doesn't ring.

I believe the issue also occurs with the 96dpi, although I can not say I took the same troubleshooting steps above for certain.

Right now I'm flashing back to the ROM. I' going to install the other programs I use BUT not going to install the data provisioning cab file.


EDIT: Installed my additional programs outside those provided in the ROM and the phone still rings but can't connect to the internet via Sprint.

Thanks,

Frank

GorillaGladiator 05-12-2011 11:39 AM

Re: +++RaiderROM! WM 6.5.3 [04/27/2011]
 
I've found the same result in the RealVGA ROM, no phone ringer after installation of the internet cab.

rkflank 05-12-2011 12:55 PM

Re: +++RaiderROM! WM 6.5.3 [04/27/2011]
 
Quote:

Originally Posted by FrankStevens87 (Post 2100495)
Raider, here's what I've found:

I flash the rom following the directions on the front page. When I install the ROM, the phone rings no problem. The next step is to install provisioning for the internet (Sprint_WWE_CustomizationV1.14.0.CAB). After I install the cab file (from the front page of this post) the phone no longer rings or vibrates. All other sounds and alerts work.

I tried then running the treo ringer fix cab, but the phone still doesn't ring.

I believe the issue also occurs with the 96dpi, although I can not say I took the same troubleshooting steps above for certain.

Right now I'm flashing back to the ROM. I' going to install the other programs I use BUT not going to install the data provisioning cab file.


EDIT: Installed my additional programs outside those provided in the ROM and the phone still rings but can't connect to the internet via Sprint.

Thanks,

Frank

I had the same issue after installing both the Customization cab and ringer fix. When I looked at the registry, it seemed that the file expected for the ring tone was "plmo.mid"

[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Sound"="\Windows\plmo.mid"

I couldn't change the value in the registry so I renamed an existing ring tone to "plmo.mid" and did a soft reset which fixed the ringer issue.

Hope this helps,
Rich.

raiderfan247365 05-12-2011 02:26 PM

Re: +++RaiderROM! WM 6.5.3 [04/27/2011]
 
Quote:

Originally Posted by rkflank (Post 2100532)
I had the same issue after installing both the Customization cab and ringer fix. When I looked at the registry, it seemed that the file expected for the ring tone was "plmo.mid"

[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Sound"="\Windows\plmo.mid"

I couldn't change the value in the registry so I renamed an existing ring tone to "plmo.mid" and did a soft reset which fixed the ringer issue.

Hope this helps,
Rich.

So the Sprint Customization .cab kills the ringer... interesting. You could just set internet manually using #777 and no username or password. Arcsoft should already be set to sprint. Hey rich could you .Cab up something that did this automatically? im onto windows phone 7 and have no software for winmo :(

wizardknight 05-15-2011 03:45 AM

Re: +++RaiderROM! WM 6.5.3 [04/27/2011]
 
I'm having the same issue with no ringer post sprint internet fix also. I wish I could find out why
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"Sound"="\Windows\plmo.mid"
was locked.

I can't delete it, or change it in any way. I even tried the unlock reg tool in CeRegistryEditor with no love.

rkflank 05-16-2011 01:55 PM

Re: +++RaiderROM! WM 6.5.3 [04/27/2011]
 
Quote:

Originally Posted by raiderfan247365 (Post 2100589)
So the Sprint Customization .cab kills the ringer... interesting. You could just set internet manually using #777 and no username or password. Arcsoft should already be set to sprint. Hey rich could you .Cab up something that did this automatically? im onto windows phone 7 and have no software for winmo :(


The registry value is locked and can't be modified. The workaround is to rename any ".mid" file currently on the phone to "plmo.mid"


All times are GMT -4. The time now is 05:19 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0