PPCGeeks - [ Kitchen ][ 3-5 ][ v1.6 R3 ][28232 / 23542 / 21893 / 21056] Calkulin's WVGA Kitchen

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- CDMA TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=98)

Re: [ 11-9 ][ v1 ][ 6.5.x / 6.5 / 6.1 ] Calkulin's Visual WVGA Kitchen & ROMs

Quote:

Originally Posted by sudermatt (Post 1314827)

I tried to build a ROM and now I'm stuck on the Touch pro 2 screen with the Build Numbers on the bottom.

I've built 20 ROMs with Culk's TP kitchen so I'm no nube.....

I need to get my device into the Tricolor so I can put a ROM on my phone.

Searched all over and can't find it....anybody know?

power,volume down and reset

Re: [ 11-9 ][ v1 ][ 6.5.x / 6.5 / 6.1 ] Calkulin's Visual WVGA Kitchen & ROMs

Quote:

Originally Posted by sudermatt (Post 1314827)

press and hold down the "vo9lume down button" then soft reset, continue to hold down volume down and that will take you to the tri color screen

Re: [ 11-9 ][ v1 ][ 6.5.x / 6.5 / 6.1 ] Calkulin's Visual WVGA Kitchen & ROMs

Thanks Cal, I've been waiting for long time your 6.1. it's pretty fast and stable rom that I ever flashed so far. I was using SSK WM6.1 and I wasn't able to fix my location. I'd like very much. I always prefer 6.1 than 6.5. Thanks so much again.

Re: [ 11-9 ][ v1 ][ 6.5.x / 6.5 / 6.1 ] Calkulin's Visual WVGA Kitchen & ROMs

Awesome! Glad to see you come to the TP2 side! I'm really looking forward to trying out the kitchen. Thanks!

Re: [ 11-9 ][ v1 ][ 6.5.x / 6.5 / 6.1 ] Calkulin's Visual WVGA Kitchen & ROMs

Quote:

Originally Posted by sudermatt (Post 1314827)

You have to remember to check that box at the top about the6.5 kernal ... I skipped that once tonight, too.

Re: [ 11-9 ][ v1 ][ 6.5.x / 6.5 / 6.1 ] Calkulin's Visual WVGA Kitchen & ROMs

Got it figured out....

hold Vol Down while the device was resetting....

Now I gotta figure out how to get the rom to completely load onto my phone

Quote:

Originally Posted by sudermatt (Post 1314827)

Re: [ 11-9 ][ v1 ][ 6.5.x / 6.5 / 6.1 ] Calkulin's Visual WVGA Kitchen & ROMs

welcome, calk ... nice release

Re: [ 11-9 ][ v1 ][ 6.5.x / 6.5 / 6.1 ] Calkulin's Visual WVGA Kitchen & ROMs

Great just what I need the night before I have to get up early...lol

Re: [ 11-9 ][ v1 ][ 6.5.x / 6.5 / 6.1 ] Calkulin's Visual WVGA Kitchen & ROMs

Quote:

Originally Posted by proxhack (Post 1314658)

Hello,

I noticed a couple little issues:
1.-When opening bubble breaker under games first freezes and then it gives an error message.
2.- When opening footprints from the task bar it gives you the following error:"The file footcam cannot be opened,it talks about a trust certificate.
3.- When clicking to switch between tabs on the taskbar it freezes every couple minutes, the problem corrects itself by clicking the on and off button on the top.

Just trying to help make this the best rom here.

Thank you.

The Bubble Breaker issue is I forgot to include the language when I updated the SYS last night(file attached). As for footprints, how are you trying to open it? Because Footcam is modded so Footprints works on the TP2 but when I tested it, it worked fine from the tab(didn't try from the start menu) and I'm running a 2.1 ROM now, so I'll try tomorrow to check again. And the freezing, I never experienced freezing like that, so I can't say

EDIT: I guess I forgot to include a file for footprints, so just install this cab to fix Bubble Breaker and Footprints. I'll reupload the kitchen & ROMs with the fix tomorrow morning