Rhodium Radios From stock roms

[khudson23]

HOw do you check your current radio version? thanks a ton!

[razorloves]

Originally Posted by khudson23

HOw do you check your current radio version? thanks a ton!

go to system settings, then click on Device Information
or
dial ##778#, view, then see what it says for Firmware Version
or
when you first turn on your phone and you see the red letters and numbers, your radio version is the one in front of the R

[Mr. X]

has any one flashed the 1.88WV? i have unpacked this personally from the shipped rom here and it always flashes as 2.05WV

if this one is correct i will add it to the sticky thanks to the OP.

[BoneZ]

I've just noticed that the stock radio on my TP2 is already the 1.88.07WV. Not sure I'm even having problems with the radio or not, but I'm having problems with the signal bars at minimum.

[Mr. X]

1.88.07WV was nothing but issues form e and others... it was to the point where i would be in full signal and a SMS would not send with a network not ready message. flashed to USC 2.05 and all is well.

[BoneZ]

The problem I'm having is the signal bar would go down to 1 bar, then shoot up to 4 or 5, then go down to 2, 3, 4, shoot down to 1, shoot up to 5. It's almost constantly in motion. When sitting next to my Blackberry Storm 1, my Blackberry has 4 solid bars and it never moves.

I was hoping to find a radio (not a complete rom) that will resolve this issue.

[Mr. X]

Originally Posted by BoneZ

The problem I'm having is the signal bar would go down to 1 bar, then shoot up to 4 or 5, then go down to 2, 3, 4, shoot down to 1, shoot up to 5. It's almost constantly in motion. When sitting next to my Blackberry Storm 1, my Blackberry has 4 solid bars and it never moves.

I was hoping to find a radio (not a complete rom) that will resolve this issue.

go to my radio thread, its a sticky. i cant see how you missed it

Download the USC 2.05WV radio and flash it.

you will have better luck with that.

[BoneZ]

Originally Posted by Juggalo_X

go to my radio thread, its a sticky. i cant see how you missed it

Download the USC 2.05WV radio and flash it.

you will have better luck with that.

Not sure how I missed it either. When I did a search for "radio" a few weeks ago, all that came up was FM radio this and FM radio that. I don't even care about my phone having an FM radio in it as I don't even listen to FM radio stations!

But, I may hold off for a while. Flashing my Blackberry was simple and you never had to worry about bricking them because if you did, you just flashed the original ROM back on and started over. It seems like on a WM phone, if it's bricked, it's bricked.

I personally don't see any reason why if you brick a phone, that you can't restore the original ROM and start over. For you to have a phone replaced because it became bricked from flashing, is unacceptable and shouldn't have to happen.

There should be a way to make an image of your entire phone for a backup so that if your phone becomes bricked, it can be flashed with that image and you can start over. I'm fairly new to WM phones, so there may be a way. But then if there were, you would've done that to yours before you had it replaced, correct?

Very scary to even think about WM phones being real bricks and not being able to be restored like Blackberries.

[Heavy G]

Maybe stupid question but will 1.96WF work with unlocked sprint tp2 on US carriers! Please reply!

Thank you to all in advance!