PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=98)
-   -   |ROM|¯`·.¸¸.- Energy -.¸¸.·´¯ * |July 4| 21916|29022 * Sense 2021 + flavors (http://forum.ppcgeeks.com/showthread.php?t=86489)

jonoball88 11-20-2009 06:14 PM

Re: |CR|6.5.3|ROM|WWE| ★ EnergyROM "Leo" (28002/21869) ★ |Nov 20| ★ Latest Sense 2.5!
 
Quote:

Originally Posted by jsowder (Post 1348181)
Flashed with 28002 and now my phone hangs on the boot screen where it says Touch Pro2 and shows the ROM version etc.. in red.

What do I do now?????


flash a different rom. the 28002 dosnt seem to load properly

siraloz 11-20-2009 06:16 PM

Re: |CR|6.5.3|ROM|WWE| ★ EnergyROM "Leo" (28002/21869) ★ |Nov 20| ★ Latest Sense 2.5!
 
my pc aint talking to my phone to be flashing some other roms. stuck at same touch pro2 screen.

jonoball88 11-20-2009 06:19 PM

Re: |CR|6.5.3|ROM|WWE| ★ EnergyROM "Leo" (28002/21869) ★ |Nov 20| ★ Latest Sense 2.5!
 
Quote:

Originally Posted by siraloz (Post 1348206)
my pc aint talking to my phone to be flashing some other roms. stuck at same touch pro2 screen.


ok well take your battery out, put it back in. dont turn on your phone. Hold the end key, the volume down and the sleep key ontop of your phone. when you hold these 3 keys down it will turn into the bootloader mode then your pc will recognize your phone.

jsowder 11-20-2009 06:23 PM

Re: |CR|6.5.3|ROM|WWE| ★ EnergyROM "Leo" (28002/21869) ★ |Nov 20| ★ Latest Sense 2.5!
 
See my post above
"OK I figured it out, hold Volume Down, Power and push red Reset Button (under battery cover) simultaniously. Once bootloader screen appears, plug phone back into USB on PC then start flash utility and walk through the steps."

siraloz 11-20-2009 06:34 PM

Re: |CR|6.5.3|ROM|WWE| ★ EnergyROM "Leo" (28002/21869) ★ |Nov 20| ★ Latest Sense 2.5!
 
For Sprint, the following worked for me.

Vol Down + POWER
Device will go into Bootloader mode (RBG Screen)

Then Start ROMUpdateUtility.exe from another ROM.

All GO!



Quote:

Originally Posted by jsowder (Post 1348219)
See my post above
"OK I figured it out, hold Volume Down, Power and push red Reset Button (under battery cover) simultaniously. Once bootloader screen appears, plug phone back into USB on PC then start flash utility and walk through the steps."


solarflarex 11-20-2009 06:40 PM

Re: |CR|6.5.3|ROM|WWE| ★ EnergyROM "Leo" (28002/21869) ★ |Nov 20| ★ Latest Sense 2.5!
 
Dammit.. this is a tease. Did NRG just post and crash out dead from cooking? It has to be a bad upload or compile of kitchen? Getrting past flashing is pretty basic....

siraloz 11-20-2009 06:44 PM

Re: |CR|6.5.3|ROM|WWE| ★ EnergyROM "Leo" (28002/21869) ★ |Nov 20| ★ Latest Sense 2.5!
 
Looking at the sizes of all the other ROMs from him, the size of this 28002 seems a little too low. I sense a kitchen mishap that went unnoticed.

Maybe too little zing?


Quote:

Originally Posted by solarflarex (Post 1348254)
Dammit.. this is a tease. Did NRG just post and crash out dead from cooking? It has to be a bad upload or compile of kitchen? Getrting past flashing is pretty basic....


backpackerpaul 11-20-2009 06:46 PM

Re: |CR|6.5.3|ROM|WWE| ★ EnergyROM "Leo" (28002/21869) ★ |Nov 20| ★ Latest Sense 2.5!
 
I believe its an upload that aborted. Its 45 MB smaller (110) that 11/19 of the same mod. I'm sure it will be reloaded. 11/19 was 156 MB I believe.

solarflarex 11-20-2009 06:47 PM

Re: |CR|6.5.3|ROM|WWE| ★ EnergyROM "Leo" (28002/21869) ★ |Nov 20| ★ Latest Sense 2.5!
 
Quote:

Originally Posted by siraloz (Post 1348264)
Looking at the sizes of all the other ROMs from him, the size of this 28002 seems a little too low. I sense a kitchen mishap that went unnoticed.

Maybe too little zing?

or too much zing heheh

sonificator 11-20-2009 06:49 PM

Re: |CR|6.5.3|ROM|WWE| ★ EnergyROM "Leo" (28002/21869) ★ |Nov 20| ★ Latest Sense 2.5!
 
Hey Everyone! I am on the latest 21869, trying to resolve a bunch of issues:
1) How to get rid of the endlessly flashing notification light. I turned off all flashing notifications in settings and installed the “Notification LED Enable Options” cab, without effect?
2) How to expand the start menu to 4-5, tried some of the cabs but none seem to be working on this version?
3) I regularly get a “777 - can’t establish connection”, even though all connections seem fine?
4) The long-press SEND button tries to launch some application, which is not properly set up (can’t tell what, but I did install voice command, I wonder if it’s related). I would like to get it back to the customary default of turning on the speaker?
5) How to make this Opera 10 the default system browser?
6) Is there a command line / shortcut to press one of the phone buttons (#1) during a phone conversation, I would like to map it to a hardware button?
Any help would be greatly appreciated!


All times are GMT -4. The time now is 09:08 AM.

Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0