Originally Posted by hypeo (Post 1855559)

Will this work on 5-24?

Originally Posted by RadarRider (Post 1855560)

K I did a task29, then flashed 062010 did a hard reset and applied Blackout 6.20.10. Now I have no data networking connection at all. Didn't see anything on how to setup your networking again. But basically I have no data connection-no opera, email, etc.

Other thing was I tried the burnt orange dialer, but it fails to install and I can't see the letters on the blackout dialer (which I need). Any clues on how to get networking back and get the burnt orange dialer or some other dialer with visable letters on the dialer keypad working? I also noticed I can't lock the phone from after pushing the start button. It just doesn't work. tips tricks?

Thanks ahead of tim--RR

Originally Posted by jaytv (Post 1855552)

Iranian Embassy...LOL!

Originally Posted by hypeo (Post 1855559)

Will this work on 5-24?

Originally Posted by sidwin (Post 1855616)

i tried using the sprint picture mail cab but after you install it, it says not for this version. can someone post up the cab that they are using with 6.5?

Thanks,
Sid

Originally Posted by jdmsohc22 (Post 1853407)

haha that would be more than awesome... I'd install all kinds of defense men cab's to our team hahaha...

also, that meltwater facebook tab didn't work =(

it sucks that the facebook app is so shitty, looks like I'll stick to m.facebook.com :-({|=

Originally Posted by [sammich] (Post 1855395)

The Carbon Red Theme's dialer has been updated. I will be releasing a new tonight.

Originally Posted by RadarRider (Post 1855647)

How do you switch themes? I'd like to try this carbon red out, but have Blackout on. Is it as simple as installing C R or need to hard reset, then run C R theme install? Sorry for newbie question, but haven't messed with MightyRom or theme changes before.

Originally Posted by Kane3162 (Post 1855580)

considering the dialer on 5-24 and the dialer on 6-20 are different... the new one... will NOT work... get the one that is up now for as far as i know its made for that dialer... the new one will not... EDIT:(speculation i guess since after i posted this sammich said otherwise...)




if you have now working data connection then provision the device for your carrier (start -> tools -> provision), the auto provision seems to be broken for quite a few of us (but at no discernible pattern I an recognize, unless task29 is causing some delay of the registry entry being populated by the carrier name, thats one i didnt think of, but is possible -i guess at least... a guess that is, for all others who auto-prov didnt work, did you task29? or just flash from previous rom without?)

Originally Posted by [sammich] (Post 1855651)

There shouldn't be any issues if you install the Carbon Red theme over another theme. It should just overwrite any files that were in the previous theme. Purian and I used the same files to skin from, so our themes should just overwrite eachother.

For anything that was skinned in the black theme that was NOT skinned in mine, the theme will still be there. However, black goes well with my theme anyways, so you shouldn't experience any issues.

To be perfectly honest, though, I would do a hard-reset before installing. The themes modify many system files, so it would probably make you phone faster overall if you install after a hard-reset.

Originally Posted by mrmediaguy (Post 1728044)

You have to create a provisioning XML (PROVXML) file to do this -- the email account settings arent in the registry or a file you can back up, but in a system DB on the device. Here's an example of what a PROVXML looks like to create one POP3 email account (replacing the double brackets and what's between them with your own info):

<wap-provisioningdoc>
<characteristic type="EMAIL2">
<characteristic type="{0d06040e-0e09-020f-0b0f-09080e06010b}">
<parm name="CONNECTIONID" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="SERVICENAME" value="[[EMAIL ACCOUNT NAME]]" />
<parm name="SERVICETYPE" value="POP3" />
<parm name="INSERVER" value="[[INCOMING SERVER]]" />
<parm name="OUTSERVER" value="[[OUTGOING SERVER]]" />
<parm name="NAME" value="[[DISPLAY NAME]]" />
<parm name="AUTHNAME" value="[[EMAIL USERNAME]]" />
<parm name="AUTHSECRET" value="[[PASSWORD]]" />
<parm name="DOMAIN" value="" />
<parm name="REPLYADDR" value="[[REPLY-TO ADDRESS]]" />
<parm name="FORMAT" value="2" />
<parm name="LINGER" value="60" />
<parm name="RETRIEVE" value="2048" />
<parm name="KEEPMAX" value="" />
<parm name="DWNDAY" value="-1" />
<characteristic type="TAGPROPS">
<parm name="8128000B" value="1"/>
<parm name="812C000B" value="1"/>
</characteristic>
<parm name="AUTHREQUIRED" value="1" />
<parm name="SMTPALTENABLED" value="0" />
<parm name="SMTPALTAUTHNAME" value="" />
<parm name="SMTPALTPASSWORD" value="" />
</characteristic>
</characteristic>
</wap-provisioningdoc>

Obviously that doesn't look like a lot of fun to code, and it's not. There are some cool tools out there, particularly the Makisu module of SASHIMI that will let you fill out some form questions with your info and then programmatically build the PROVXML for you, so you might want to check that out. I will say that once you move to SASHIMI or UC and get your PROVXMLs built, you'll never go back to any other method of restoring settings. Good luck!