PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP Development (http://forum.ppcgeeks.com/forumdisplay.php?f=68)
-   -   Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible] (http://forum.ppcgeeks.com/showthread.php?t=64242)

Hafrust 04-11-2009 10:57 AM

Re: Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]
 
Not sure what you mean? Just tap start and then the left soft key should lock it.

MiltonPro 04-11-2009 11:12 AM

Re: Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]
 
I found the link for total commander.. but I am not having any luck ,I kow I installed once on this ROM, but due to a much needed re-flash...
Someone have the cab available for Total commander.. Thanks

razorloves 04-11-2009 11:14 AM

Re: Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]
 
1 Attachment(s)
Quote:

Originally Posted by MiltonPro (Post 840888)
I found the link for total commander.. but I am not having any luck ,I kow I installed once on this ROM, but due to a much needed re-flash...
Someone have the cab available for Total commander.. Thanks

here you go. The latest version.

JimSmith94 04-11-2009 11:17 AM

Re: Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]
 
1 Attachment(s)
Quote:

Originally Posted by MiltonPro (Post 840888)
I found the link for total commander.. but I am not having any luck ,I kow I installed once on this ROM, but due to a much needed re-flash...
Someone have the cab available for Total commander.. Thanks

Here you go.

MiltonPro 04-11-2009 11:20 AM

Re: Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]
 
Thanks, both..... Got it....

thestick00 04-11-2009 11:44 AM

Re: Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]
 
Hey guys. Two issues.

1. I installed the rodium notification cab found in Mighty's prior thread when I first flashed this rom. However, my notifications are all kinds of messed up. They whow up half on the screen. They are either half way off the right side of the screen or halfway below. You can never read the entire notification unless it is a few words long at best. What notification cab are you guys using. These is slightly frustrating. I am going to remove the cab and re-install to see if that helps.


2. Am i missing something with the volume control on this. I went to the movies yesterday, and used the side volume control to put the volume all the way down. I even whipped out the stylus and adjusted via the on screen controls to make sure. About half way through Fast and Furious, my phone goes off. I quickly turned it off. But for some reason my volume just does NOT want to mute on this. Just called myself from home to double check. Yup. Volume refuses to be silenced on my ringer. Any ideas?

MWSlim 04-11-2009 11:46 AM

Re: Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]
 
Quote:

Originally Posted by thestick00 (Post 840951)
Hey guys. Two issues.

1. I installed the rodium notification cab found in Mighty's prior thread when I first flashed this rom. However, my notifications are all kinds of messed up. They whow up half on the screen. They are either half way off the right side of the screen or halfway below. You can never read the entire notification unless it is a few words long at best. What notification cab are you guys using. These is slightly frustrating. I am going to remove the cab and re-install to see if that helps.


2. Am i missing something with the volume control on this. I went to the movies yesterday, and used the side volume control to put the volume all the way down. I even whipped out the stylus and adjusted via the on screen controls to make sure. About half way through Fast and Furious, my phone goes off. I quickly turned it off. But for some reason my volume just does NOT want to mute on this. Just called myself from home to double check. Yup. Volume refuses to be silenced on my ringer. Any ideas?

I set mine to vibrate during the movies last night and it worked fine :)

hibby50 04-11-2009 11:52 AM

Re: Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]
 
yea vibe worked last night for me

gmarcoux 04-11-2009 11:56 AM

Re: Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]
 
Quote:

Originally Posted by thestick00 (Post 840951)
Hey guys. Two issues.

1. I installed the rodium notification cab found in Mighty's prior thread when I first flashed this rom. However, my notifications are all kinds of messed up. They whow up half on the screen. They are either half way off the right side of the screen or halfway below. You can never read the entire notification unless it is a few words long at best. What notification cab are you guys using. These is slightly frustrating. I am going to remove the cab and re-install to see if that helps.


2. Am i missing something with the volume control on this. I went to the movies yesterday, and used the side volume control to put the volume all the way down. I even whipped out the stylus and adjusted via the on screen controls to make sure. About half way through Fast and Furious, my phone goes off. I quickly turned it off. But for some reason my volume just does NOT want to mute on this. Just called myself from home to double check. Yup. Volume refuses to be silenced on my ringer. Any ideas?


The phone volume is fine... it was just objecting to you watching sucha horrible movie lol jk

thestick00 04-11-2009 11:57 AM

Re: Copper v.0.0.0.1 [6.5.21500 Build 21500] [16MBPP] [UC Compatible]
 
Quote:

Originally Posted by MWSlim (Post 840957)
I set mine to vibrate during the movies last night and it worked fine :)

I think i figured that out. An app i installed, Photo Contacts Pro, has its own built in volume control that overides the default volume controls. Got that fixed. Now its just the notification cab. Is everyone using the cab file found in mighty's old thread for rodium notifications? Thanks.


All times are GMT -4. The time now is 04:35 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0